From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751396AbdAUQfc (ORCPT ); Sat, 21 Jan 2017 11:35:32 -0500 Received: from dougal.metanate.com ([90.155.101.14]:50789 "EHLO metanate.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751164AbdAUQcK (ORCPT ); Sat, 21 Jan 2017 11:32:10 -0500 From: John Keeping To: Mark Yao Cc: Chris Zhong , dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, John Keeping Subject: [PATCH v2 18/26] drm/rockchip: dw-mipi-dsi: properly configure PHY timing Date: Sat, 21 Jan 2017 16:31:20 +0000 Message-Id: <20170121163128.22240-19-john@metanate.com> X-Mailer: git-send-email 2.11.0.197.gb556de5.dirty In-Reply-To: <20170121163128.22240-1-john@metanate.com> References: <20170121163128.22240-1-john@metanate.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org These values are specified as constant time periods but the PHY configuration is in terms of the current lane byte clock so using constant values guarantees that the timings will be outside the specification with some display configurations. Derive the necessary configuration from the byte clock in order to ensure that the PHY configuration is correct. Signed-off-by: John Keeping --- Unchanged in v2 --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 36 ++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index cfe7e4ba305c..12432e41971b 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -383,6 +383,26 @@ static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code, dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); } +/** + * ns2bc - Nanoseconds to byte clock cycles + */ +static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns) +{ + unsigned long byte_clk_khz = dsi->lane_mbps * MSEC_PER_SEC / 8; + + return (ns * (byte_clk_khz / 1000) + 999) / 1000; +} + +/** + * ns2ui - Nanoseconds to UI time periods + */ +static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns) +{ + unsigned long byte_clk_khz = dsi->lane_mbps * MSEC_PER_SEC; + + return (ns * (byte_clk_khz / 1000) + 999) / 1000; +} + static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) { int ret, testdin, vco, val; @@ -434,10 +454,18 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) SETRD_MAX | POWER_MANAGE | TER_RESISTORS_ON); - - dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | 0xf); - dw_mipi_dsi_phy_write(dsi, 0x71, THS_PRE_PROGRAM_EN | 0x55); - dw_mipi_dsi_phy_write(dsi, 0x72, THS_ZERO_PROGRAM_EN | 0xa); + dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500)); + dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40)); + dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300)); + dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100)); + dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100)); + dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7)); + + dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500)); + dw_mipi_dsi_phy_write(dsi, 0x71, THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5)); + dw_mipi_dsi_phy_write(dsi, 0x72, THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2)); + dw_mipi_dsi_phy_write(dsi, 0x73, THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8)); + dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100)); dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK | PHY_UNRSTZ | PHY_UNSHUTDOWNZ); -- 2.11.0.197.gb556de5.dirty