Re: [PATCH] extcon: arizona: Wait for any running HPDETs to complete on jack removal

[Charles Keepax <ckeepax@opensource.wolfsonmicro.com>]

On Wed, Jan 25, 2017 at 10:00:40AM +0900, Chanwoo Choi wrote:
> Hi Charles,
> 
> On 2017년 01월 24일 19:17, Charles Keepax wrote:
> > As the HPDET can't be aborted mid way through we should not allow any new
> > insertion to be processed until the previous HPDET has finished. It is very
> > unlikely but with low enough debounce settings you could start a new HPDET
> > before the old one has completed, which results in an erroneous reading.
> > 
> > Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> > ---
> >  drivers/extcon/extcon-arizona.c | 35 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 35 insertions(+)
> > 
> > diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> > index ed78b7c..218e378 100644
> > --- a/drivers/extcon/extcon-arizona.c
> > +++ b/drivers/extcon/extcon-arizona.c
> > @@ -1049,6 +1049,39 @@ static void arizona_hpdet_work(struct work_struct *work)
> >  	mutex_unlock(&info->lock);
> >  }
> >  
> > +static int arizona_hpdet_wait(struct arizona_extcon_info *info)
> > +{
> > +	struct arizona *arizona = info->arizona;
> > +	unsigned int val;
> > +	int i, ret;
> > +
> > +	for (i = 0; i < 15; i++) {
> 
> I recommend that you define the separate constant definition
> instead of using interger value (15) directly as following:
> 	
> 	#define HPDET_WAIT_COUNT	15
> 
> > +		ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2,
> > +				  &val);
> > +		if (ret) {
> > +			dev_err(arizona->dev,
> > +				"Failed to read HPDET state: %d\n", ret);
> > +			return ret;
> > +		}
> > +
> > +		switch (info->hpdet_ip_version) {
> > +		case 0:
> > +			if (val & ARIZONA_HP_DONE)
> > +				return 0;
> > +			break;
> > +		default:
> > +			if (val & ARIZONA_HP_DONE_B)
> > +				return 0;
> > +			break;
> > +		}
> > +
> > +		msleep(20);
> 
> ditto.
> 
> 	#define HPDET_WAIT_DELAY_MS	20
> 

Yeah can do.

> > +	}
> > +
> > +	dev_err(arizona->dev, "HPDET did not appear to complete\n");
> > +	return -ETIMEDOUT;
> > +}
> > +
> >  static irqreturn_t arizona_jackdet(int irq, void *data)
> >  {
> >  	struct arizona_extcon_info *info = data;
> > @@ -1155,6 +1188,8 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
> >  					"Removal report failed: %d\n", ret);
> >  		}
> >  
> 
> Sometimes I met this similiar case on specific h/w.
> I agree to add some delay according to the h/w.
> So, you better to add the detailed comment before
> calling the arizona_hpdet_wait() to make it easy
> to understand why it is necessary.
> 
> > +		arizona_hpdet_wait(info);
> 

No problem to add a comment.

> Is not necessary to check the return value of this call?
> When arizona_hpdet_wait() return the -ETIMEDOUT,
> Does not this error affect the next some code?
> 

I included a return value for completeness sake and incase the
function gets reused in other places in the future. But at that
point I don't think there is really any action we can take if
that call fails, that part of the code relates to the jack being
removed so we still need to take all those actions. We can only
really log that the failure happened in the kernel log which it
already does.

Thanks,
Charles

> > +
> 
> >  		regmap_update_bits(arizona->regmap,
> >  				   ARIZONA_JACK_DETECT_DEBOUNCE,
> >  				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB,
> > 
> -- 
> Best Regards,
> Chanwoo Choi
> Samsung Electronics