mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Jiri Kosina <jikos@kernel.org>,
	Bastien Nocera <hadess@hadess.net>,
	Peter Hutterer <peter.hutterer@who-t.net>,
	Nestor Lopez Casado <nlopezcasad@logitech.com>,
	Olivier Gay <ogay@logitech.com>, Simon Wood <simon@mungewell.org>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 15/15] HID: logitech-hidpp: rework hidpp_connect_event()
Date: Thu,  2 Feb 2017 15:12:29 +0100	[thread overview]
Message-ID: <20170202141229.17322-16-benjamin.tissoires@redhat.com> (raw)
In-Reply-To: <20170202141229.17322-1-benjamin.tissoires@redhat.com>

Looks like all users don't care about a disconnect.
Simplify the various variant_connect() and put the connect state check
at the beginning.

For delayed input devices, make sure we go through all other connect
values (protocol, battery) before bailing out.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

---

new in v2
---
 drivers/hid/hid-logitech-hidpp.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 28ce443..5aff454 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -2120,9 +2120,6 @@ static int wtp_connect(struct hid_device *hdev, bool connected)
 	struct wtp_data *wd = hidpp->private_data;
 	int ret;
 
-	if (!connected)
-		return 0;
-
 	if (!wd->x_size) {
 		ret = wtp_get_config(hidpp);
 		if (ret) {
@@ -2190,9 +2187,6 @@ static int m560_send_config_command(struct hid_device *hdev, bool connected)
 
 	hidpp_dev = hid_get_drvdata(hdev);
 
-	if (!connected)
-		return -ENODEV;
-
 	return hidpp_send_rap_command_sync(
 		hidpp_dev,
 		REPORT_ID_HIDPP_SHORT,
@@ -2396,9 +2390,6 @@ static int k400_connect(struct hid_device *hdev, bool connected)
 {
 	struct hidpp_device *hidpp = hid_get_drvdata(hdev);
 
-	if (!connected)
-		return 0;
-
 	if (!disable_tap_to_click)
 		return 0;
 
@@ -2715,6 +2706,9 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	struct input_dev *input;
 	char *name, *devm_name;
 
+	if (!connected)
+		return;
+
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP) {
 		ret = wtp_connect(hdev, connected);
 		if (ret)
@@ -2729,9 +2723,6 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 			return;
 	}
 
-	if (!connected || hidpp->delayed_input)
-		return;
-
 	/* the device is already connected, we can ask for its name and
 	 * protocol */
 	if (!hidpp->protocol_major) {
@@ -2773,8 +2764,8 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	if (hidpp->battery.ps)
 		power_supply_changed(hidpp->battery.ps);
 
-	if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT))
-		/* if HID created the input nodes for us, we can stop now */
+	if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT) || hidpp->delayed_input)
+		/* if the input nodes are already created, we can stop now */
 		return;
 
 	input = hidpp_allocate_input(hdev);
-- 
2.9.3

      parent reply	other threads:[~2017-02-02 14:13 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-02 14:12 [PATCH v2 00/15] Report power supply from hid-logitech-hidpp Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 01/15] HID: logitech-dj: allow devices to request full pairing information Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 02/15] HID: logitech-hidpp: Add scope to battery Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 03/15] HID: logitech-hidpp: make sure we only register one battery per device Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 04/15] HID: logitech-hidpp: battery: remove overloads and provide ONLINE Benjamin Tissoires
2017-02-08 13:48   ` Bastien Nocera
2017-03-16  9:20     ` Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 05/15] HID: logitech-hidpp: forward device info in power_supply Benjamin Tissoires
2017-02-03 15:08   ` Bastien Nocera
2017-02-07  8:35     ` Benjamin Tissoires
2017-03-06 12:18       ` Jiri Kosina
2017-03-06 12:27         ` Bastien Nocera
2017-03-06 13:39           ` Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 06/15] HID: logitech-hidpp: create the battery for all types of HID++ devices Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 07/15] HID: logitech-hidpp: return an error if the feature is not present Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 08/15] HID: logitech-hidpp: add support for battery status for the K750 Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 09/15] HID: logitech-hidpp: enable HID++ 1.0 battery reporting Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 10/15] HID: logitech-hidpp: notify battery on connect Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 11/15] HID: logitech-hidpp: add a sysfs file to tell we support power_supply Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 12/15] HID: logitech-hidpp: do not query the name through HID++ for 1.0 devices Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 13/15] HID: logitech-hidpp: rework probe path for unifying devices Benjamin Tissoires
2017-02-02 14:12 ` [PATCH v2 14/15] HID: logitech-hidpp: retrieve the HID++ device name when available Benjamin Tissoires
2017-02-02 14:12 ` Benjamin Tissoires [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170202141229.17322-16-benjamin.tissoires@redhat.com \
    --to=benjamin.tissoires@redhat.com \
    --cc=hadess@hadess.net \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nlopezcasad@logitech.com \
    --cc=ogay@logitech.com \
    --cc=peter.hutterer@who-t.net \
    --cc=simon@mungewell.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®