From: "Andrew F. Davis" <afd@ti.com>
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, "Andrew F . Davis" <afd@ti.com>
Subject: [PATCH 1/2] regulator: tps65086: Fix expected switch DT node names
Date: Fri, 10 Feb 2017 11:55:46 -0600 [thread overview]
Message-ID: <20170210175547.21119-1-afd@ti.com> (raw)
The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.
Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
---
drivers/regulator/tps65086-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index ecb0371780af..84e8cb109269 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -157,8 +157,8 @@ static struct tps65086_regulator regulators[] = {
VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0),
tps65086_ldoa23_ranges, 0, 0),
TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)),
- TPS65086_SWITCH("SWB1", "swa2", SWB1, TPS65086_SWVTT_EN, BIT(6)),
- TPS65086_SWITCH("SWB2", "swa3", SWB2, TPS65086_SWVTT_EN, BIT(7)),
+ TPS65086_SWITCH("SWB1", "swb1", SWB1, TPS65086_SWVTT_EN, BIT(6)),
+ TPS65086_SWITCH("SWB2", "swb2", SWB2, TPS65086_SWVTT_EN, BIT(7)),
TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
};
--
2.11.0
next reply other threads:[~2017-02-10 17:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-10 17:55 Andrew F. Davis [this message]
2017-02-10 17:55 ` [PATCH 2/2] regulator: tps65086: Fix DT node referencing in of_parse_cb Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170210175547.21119-1-afd@ti.com \
--to=afd@ti.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®