mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/5] clk: sunxi-ng: gate: Support common pre-dividers
Date: Tue, 14 Feb 2017 11:35:23 +0800	[thread overview]
Message-ID: <20170214033526.16977-3-wens@csie.org> (raw)
In-Reply-To: <20170214033526.16977-1-wens@csie.org>

Some clock gates have a pre-divider between the source input and the
gate itself. A notable example is the HSIC 12 MHz clock found on the
A83T, which has the 24 MHz main oscillator as its input, and a /2
pre-divider.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_gate.c | 47 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu_gate.c b/drivers/clk/sunxi-ng/ccu_gate.c
index 8a81f9d4a89f..cd069d5da215 100644
--- a/drivers/clk/sunxi-ng/ccu_gate.c
+++ b/drivers/clk/sunxi-ng/ccu_gate.c
@@ -75,8 +75,55 @@ static int ccu_gate_is_enabled(struct clk_hw *hw)
 	return ccu_gate_helper_is_enabled(&cg->common, cg->enable);
 }
 
+static unsigned long ccu_gate_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct ccu_gate *cg = hw_to_ccu_gate(hw);
+	unsigned long rate = parent_rate;
+
+	if (cg->common.features & CCU_FEATURE_ALL_PREDIV)
+		rate /= cg->common.prediv;
+
+	return rate;
+}
+
+static long ccu_gate_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct ccu_gate *cg = hw_to_ccu_gate(hw);
+	int div = 1;
+
+	if (cg->common.features & CCU_FEATURE_ALL_PREDIV)
+		div = cg->common.prediv;
+
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent = rate;
+
+		if (cg->common.features & CCU_FEATURE_ALL_PREDIV)
+			best_parent *= div;
+		*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
+	}
+
+	return *prate / div;
+}
+
+static int ccu_gate_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	/*
+	 * We must report success but we can do so unconditionally because
+	 * clk_factor_round_rate returns values that ensure this call is a
+	 * nop.
+	 */
+
+	return 0;
+}
+
 const struct clk_ops ccu_gate_ops = {
 	.disable	= ccu_gate_disable,
 	.enable		= ccu_gate_enable,
 	.is_enabled	= ccu_gate_is_enabled,
+	.round_rate	= ccu_gate_round_rate,
+	.set_rate	= ccu_gate_set_rate,
+	.recalc_rate	= ccu_gate_recalc_rate,
 };
-- 
2.11.0

  parent reply	other threads:[~2017-02-14  3:35 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-14  3:35 [PATCH 0/5] clk: sunxi-ng: Add support for A83T CCU Chen-Yu Tsai
2017-02-14  3:35 ` [PATCH 1/5] clk: sunxi-ng: mp: Adjust parent rate for pre-dividers Chen-Yu Tsai
2017-02-14  9:34   ` Maxime Ripard
2017-02-14  3:35 ` Chen-Yu Tsai [this message]
2017-02-14  9:39   ` [PATCH 2/5] clk: sunxi-ng: gate: Support common pre-dividers Maxime Ripard
2017-02-14  3:35 ` [PATCH 3/5] clk: sunxi-ng: Add compatible string for A83T CCU to bindings Chen-Yu Tsai
2017-02-14  3:35 ` [PATCH 4/5] clk: sunxi-ng: Add driver for A83T CCU Chen-Yu Tsai
2017-02-14  9:58   ` Maxime Ripard
2017-02-14 10:26     ` Chen-Yu Tsai
2017-02-15  9:49       ` Maxime Ripard
2017-03-01 19:17         ` Stephen Boyd
2017-03-03  9:53           ` Maxime Ripard
2017-03-03 23:56             ` Stephen Boyd
2017-03-07 14:58               ` Maxime Ripard
2017-03-22  6:50         ` Chen-Yu Tsai
2017-03-26 20:51           ` Maxime Ripard
2017-03-27  8:53             ` Chen-Yu Tsai
2017-04-03  7:53               ` Maxime Ripard
2017-02-14  3:35 ` [PATCH 5/5] ARM: dts: sun8i-a83t: Add CCU device nodes Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170214033526.16977-3-wens@csie.org \
    --to=wens@csie.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®