mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: tpmdd-devel@lists.sourceforge.net, Nayna Jain <nayna@linux.vnet.ibm.com>
Cc: linux-security-module@vger.kernel.org,
	Peter Huewe <peterhuewe@gmx.de>,
	Marcel Selhorst <tpmdd@selhorst.net>,
	Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] tpm: declare tpm2_get_pcr_allocation() as static
Date: Fri, 17 Feb 2017 12:24:27 +0200	[thread overview]
Message-ID: <20170217102427.427h3qxwajocilji@intel.com> (raw)
In-Reply-To: <20170215180228.25650-1-jarkko.sakkinen@linux.intel.com>

On Wed, Feb 15, 2017 at 08:02:28PM +0200, Jarkko Sakkinen wrote:
> There's no need to export tpm2_get_pcr_alloation() because it is only
> a helper function for tpm2_auto_startup(). For the same reason it does
> not make much sense to maintain documentation for it.
> 
> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Nayna, does this look good to you?

/Jarkko

> ---
>  drivers/char/tpm/tpm.h      |  1 -
>  drivers/char/tpm/tpm2-cmd.c | 94 ++++++++++++++++++++++-----------------------
>  2 files changed, 45 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index 6b4e7aa..4937b56 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -554,5 +554,4 @@ int tpm2_auto_startup(struct tpm_chip *chip);
>  void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type);
>  unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
>  int tpm2_probe(struct tpm_chip *chip);
> -ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip);
>  #endif
> diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
> index 10f97e6..881aea9 100644
> --- a/drivers/char/tpm/tpm2-cmd.c
> +++ b/drivers/char/tpm/tpm2-cmd.c
> @@ -997,61 +997,13 @@ int tpm2_probe(struct tpm_chip *chip)
>  }
>  EXPORT_SYMBOL_GPL(tpm2_probe);
>  
> -/**
> - * tpm2_auto_startup - Perform the standard automatic TPM initialization
> - *                     sequence
> - * @chip: TPM chip to use
> - *
> - * Returns 0 on success, < 0 in case of fatal error.
> - */
> -int tpm2_auto_startup(struct tpm_chip *chip)
> -{
> -	int rc;
> -
> -	rc = tpm_get_timeouts(chip);
> -	if (rc)
> -		goto out;
> -
> -	rc = tpm2_do_selftest(chip);
> -	if (rc != 0 && rc != TPM2_RC_INITIALIZE) {
> -		dev_err(&chip->dev, "TPM self test failed\n");
> -		goto out;
> -	}
> -
> -	if (rc == TPM2_RC_INITIALIZE) {
> -		rc = tpm2_startup(chip, TPM2_SU_CLEAR);
> -		if (rc)
> -			goto out;
> -
> -		rc = tpm2_do_selftest(chip);
> -		if (rc) {
> -			dev_err(&chip->dev, "TPM self test failed\n");
> -			goto out;
> -		}
> -	}
> -
> -	rc = tpm2_get_pcr_allocation(chip);
> -
> -out:
> -	if (rc > 0)
> -		rc = -ENODEV;
> -	return rc;
> -}
> -
>  struct tpm2_pcr_selection {
>  	__be16  hash_alg;
>  	u8  size_of_select;
>  	u8  pcr_select[3];
>  } __packed;
>  
> -/**
> - * tpm2_get_pcr_allocation() - get TPM active PCR banks.
> - *
> - * @chip: TPM chip to use.
> - *
> - * Return: Same as with tpm_transmit_cmd.
> - */
> -ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip)
> +static ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip)
>  {
>  	struct tpm2_pcr_selection pcr_selection;
>  	struct tpm_buf buf;
> @@ -1114,3 +1066,47 @@ ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip)
>  
>  	return rc;
>  }
> +
> +/**
> + * tpm2_auto_startup - Perform the standard automatic TPM initialization
> + *                     sequence
> + * @chip: TPM chip to use
> + *
> + * Initializes timeout values for operation and command durations, conducts
> + * a self-test and reads the list of active PCR banks.
> + *
> + * Return: 0 on success. Otherwise, a system error code is returned.
> + */
> +int tpm2_auto_startup(struct tpm_chip *chip)
> +{
> +	int rc;
> +
> +	rc = tpm_get_timeouts(chip);
> +	if (rc)
> +		goto out;
> +
> +	rc = tpm2_do_selftest(chip);
> +	if (rc != 0 && rc != TPM2_RC_INITIALIZE) {
> +		dev_err(&chip->dev, "TPM self test failed\n");
> +		goto out;
> +	}
> +
> +	if (rc == TPM2_RC_INITIALIZE) {
> +		rc = tpm2_startup(chip, TPM2_SU_CLEAR);
> +		if (rc)
> +			goto out;
> +
> +		rc = tpm2_do_selftest(chip);
> +		if (rc) {
> +			dev_err(&chip->dev, "TPM self test failed\n");
> +			goto out;
> +		}
> +	}
> +
> +	rc = tpm2_get_pcr_allocation(chip);
> +
> +out:
> +	if (rc > 0)
> +		rc = -ENODEV;
> +	return rc;
> +}
> -- 
> 2.9.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-02-17 10:24 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-15 18:02 Jarkko Sakkinen
2017-02-15 18:56 ` Jason Gunthorpe
2017-02-15 19:06   ` Jarkko Sakkinen
2017-02-17 10:24 ` Jarkko Sakkinen [this message]
2017-02-20 11:20   ` [tpmdd-devel] " Jarkko Sakkinen
2017-02-21  5:50   ` Nayna
2017-02-21  6:17     ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170217102427.427h3qxwajocilji@intel.com \
    --to=jarkko.sakkinen@linux.intel.com \
    --cc=jgunthorpe@obsidianresearch.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=nayna@linux.vnet.ibm.com \
    --cc=peterhuewe@gmx.de \
    --cc=tpmdd-devel@lists.sourceforge.net \
    --cc=tpmdd@selhorst.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®