From: Arushi Singhal <arushisinghal19971997@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
outreachy-kernel@googlegroups.com
Subject: [PATCH v3 1/1] staging: ks7010: Unnecessary parentheses are removed and also improved coding style.
Date: Wed, 22 Feb 2017 17:17:45 +0530 [thread overview]
Message-ID: <20170222114745.GA25670@arushi-HP-Pavilion-Notebook> (raw)
Unnecessary parentheses are removed as reported by checkpatch.pl
to make coder nicer and to improve readability.
Also coding style is improved.For example:-
It's often nicer to read if &(foo[0]) is converted to foo like:
memcpy(&(ap->bssid[0]), &(ap_info->bssid[0]), ETH_ALEN);
memcpy(ap->bssid, ap_info->bssid, ETH_ALEN);
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
---
Changes in v3:
- Commit message made more accurate and as per the changes.
- previously versions were not marked.
---
drivers/staging/ks7010/ks_hostif.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/ks7010/ks_hostif.c b/drivers/staging/ks7010/ks_hostif.c
index 1fbd495e5e63..b643a37fb943 100644
--- a/drivers/staging/ks7010/ks_hostif.c
+++ b/drivers/staging/ks7010/ks_hostif.c
@@ -113,7 +113,7 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info)
int rc = 0;
DPRINTK(3, "\n");
- ap = &(priv->current_ap);
+ ap = &priv->current_ap;
if ((priv->connect_status & CONNECT_STATUS_MASK) == DISCONNECT_STATUS) {
memset(ap, 0, sizeof(struct local_ap_t));
@@ -121,19 +121,19 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info)
}
/* bssid */
- memcpy(&(ap->bssid[0]), &(ap_info->bssid[0]), ETH_ALEN);
+ memcpy(ap->bssid, ap_info->bssid, ETH_ALEN);
/* essid */
- memcpy(&(ap->ssid.body[0]), &(priv->reg.ssid.body[0]),
+ memcpy(ap->ssid.body, priv->reg.ssid.body,
priv->reg.ssid.size);
ap->ssid.size = priv->reg.ssid.size;
/* rate_set */
- memcpy(&(ap->rate_set.body[0]), &(ap_info->rate_set.body[0]),
+ memcpy(ap->rate_set.body, ap_info->rate_set.body,
ap_info->rate_set.size);
ap->rate_set.size = ap_info->rate_set.size;
if (ap_info->ext_rate_set.size) {
/* rate_set */
- memcpy(&(ap->rate_set.body[ap->rate_set.size]),
- &(ap_info->ext_rate_set.body[0]),
+ memcpy(&ap->rate_set.body[ap->rate_set.size],
+ ap_info->ext_rate_set.body,
ap_info->ext_rate_set.size);
ap->rate_set.size += ap_info->ext_rate_set.size;
}
@@ -153,11 +153,11 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info)
ap->rsn_ie.id = 0x30;
if (ap_info->rsn.size <= RSN_IE_BODY_MAX) {
ap->rsn_ie.size = ap_info->rsn.size;
- memcpy(&(ap->rsn_ie.body[0]), &(ap_info->rsn.body[0]),
+ memcpy(ap->rsn_ie.body, ap_info->rsn.body,
ap_info->rsn.size);
} else {
ap->rsn_ie.size = RSN_IE_BODY_MAX;
- memcpy(&(ap->rsn_ie.body[0]), &(ap_info->rsn.body[0]),
+ memcpy(ap->rsn_ie.body, ap_info->rsn.body,
RSN_IE_BODY_MAX);
}
} else if ((ap_info->rsn_mode & RSN_MODE_WPA)
@@ -165,11 +165,11 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info)
ap->wpa_ie.id = 0xdd;
if (ap_info->rsn.size <= RSN_IE_BODY_MAX) {
ap->wpa_ie.size = ap_info->rsn.size;
- memcpy(&(ap->wpa_ie.body[0]), &(ap_info->rsn.body[0]),
+ memcpy(ap->wpa_ie.body, ap_info->rsn.body,
ap_info->rsn.size);
} else {
ap->wpa_ie.size = RSN_IE_BODY_MAX;
- memcpy(&(ap->wpa_ie.body[0]), &(ap_info->rsn.body[0]),
+ memcpy(ap->wpa_ie.body, ap_info->rsn.body,
RSN_IE_BODY_MAX);
}
} else {
@@ -212,7 +212,7 @@ int get_ap_information(struct ks_wlan_private *priv, struct ap_info_t *ap_info,
memset(ap, 0, sizeof(struct local_ap_t));
/* bssid */
- memcpy(&(ap->bssid[0]), &(ap_info->bssid[0]), ETH_ALEN);
+ memcpy(ap->bssid, ap_info->bssid, ETH_ALEN);
/* rssi */
ap->rssi = ap_info->rssi;
/* sq */
@@ -224,7 +224,7 @@ int get_ap_information(struct ks_wlan_private *priv, struct ap_info_t *ap_info,
/* channel */
ap->channel = ap_info->ch_info;
- bp = &(ap_info->body[0]);
+ bp = ap_info->body;
bsize = ap_info->body_size;
offset = 0;
--
2.11.0
reply other threads:[~2017-02-22 11:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170222114745.GA25670@arushi-HP-Pavilion-Notebook \
--to=arushisinghal19971997@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®