[PATCH 1/3] [media] soc-camera: ov5642: Add OF device ID table

[Javier Martinez Canillas <javier@osg.samsung.com>]

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 drivers/media/i2c/soc_camera/ov5642.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c
index 3d185bd622a3..1926f382dfce 100644
--- a/drivers/media/i2c/soc_camera/ov5642.c
+++ b/drivers/media/i2c/soc_camera/ov5642.c
@@ -1063,9 +1063,18 @@ static const struct i2c_device_id ov5642_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ov5642_id);
 
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id ov5642_of_match[] = {
+	{ .compatible = "ovti,ov5642" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ov5642_of_match);
+#endif
+
 static struct i2c_driver ov5642_i2c_driver = {
 	.driver = {
 		.name = "ov5642",
+		.of_match_table = of_match_ptr(ov5642_of_match),
 	},
 	.probe		= ov5642_probe,
 	.remove		= ov5642_remove,
-- 
2.9.3