From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ashok Raj <ashok.raj@intel.com>,
james puthukattukaran <james.puthukattukaran@oracle.com>,
Yinghai Lu <yinghai.lu@oracle.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH] PCI,pciehp: Move printout before write_cmd
Date: Thu, 23 Feb 2017 12:28:51 -0800 [thread overview]
Message-ID: <20170223202851.1912-1-yinghai@kernel.org> (raw)
Bjorn complained some strange print out for pending interrupts.
Actually that is caused that have cmd print out after write_cmd.
Adjust the sequence to get right order for debug print out.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 026830a..94df18f99 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -475,9 +475,9 @@ void pciehp_set_attention_status(struct slot *slot, u8 value)
default:
return;
}
- pcie_write_cmd_nowait(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
+ pcie_write_cmd_nowait(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC);
}
void pciehp_green_led_on(struct slot *slot)
@@ -487,11 +487,11 @@ void pciehp_green_led_on(struct slot *slot)
if (!PWR_LED(ctrl))
return;
- pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON,
- PCI_EXP_SLTCTL_PIC);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PWR_IND_ON);
+ pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON,
+ PCI_EXP_SLTCTL_PIC);
}
void pciehp_green_led_off(struct slot *slot)
@@ -501,11 +501,11 @@ void pciehp_green_led_off(struct slot *slot)
if (!PWR_LED(ctrl))
return;
- pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
- PCI_EXP_SLTCTL_PIC);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PWR_IND_OFF);
+ pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
+ PCI_EXP_SLTCTL_PIC);
}
void pciehp_green_led_blink(struct slot *slot)
@@ -515,11 +515,11 @@ void pciehp_green_led_blink(struct slot *slot)
if (!PWR_LED(ctrl))
return;
- pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK,
- PCI_EXP_SLTCTL_PIC);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PWR_IND_BLINK);
+ pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK,
+ PCI_EXP_SLTCTL_PIC);
}
int pciehp_power_on_slot(struct slot *slot)
@@ -536,10 +536,10 @@ int pciehp_power_on_slot(struct slot *slot)
PCI_EXP_SLTSTA_PFD);
ctrl->power_fault_detected = 0;
- pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PWR_ON);
+ pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC);
retval = pciehp_link_enable(ctrl);
if (retval)
@@ -552,10 +552,10 @@ void pciehp_power_off_slot(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
- pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_OFF, PCI_EXP_SLTCTL_PCC);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PWR_OFF);
+ pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_OFF, PCI_EXP_SLTCTL_PCC);
}
static irqreturn_t pciehp_isr(int irq, void *dev_id)
@@ -701,9 +701,9 @@ void pcie_enable_notification(struct controller *ctrl)
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
PCI_EXP_SLTCTL_DLLSCE);
- pcie_write_cmd_nowait(ctrl, cmd, mask);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, cmd);
+ pcie_write_cmd_nowait(ctrl, cmd, mask);
}
static void pcie_disable_notification(struct controller *ctrl)
@@ -714,9 +714,9 @@ static void pcie_disable_notification(struct controller *ctrl)
PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE |
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
PCI_EXP_SLTCTL_DLLSCE);
- pcie_write_cmd(ctrl, 0, mask);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0);
+ pcie_write_cmd(ctrl, 0, mask);
}
/*
@@ -743,18 +743,18 @@ int pciehp_reset_slot(struct slot *slot, int probe)
ctrl_mask |= PCI_EXP_SLTCTL_DLLSCE;
stat_mask |= PCI_EXP_SLTSTA_DLLSC;
- pcie_write_cmd(ctrl, 0, ctrl_mask);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0);
+ pcie_write_cmd(ctrl, 0, ctrl_mask);
if (pciehp_poll_mode)
del_timer_sync(&ctrl->poll_timer);
pci_reset_bridge_secondary_bus(ctrl->pcie->port);
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, stat_mask);
- pcie_write_cmd_nowait(ctrl, ctrl_mask, ctrl_mask);
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, ctrl_mask);
+ pcie_write_cmd_nowait(ctrl, ctrl_mask, ctrl_mask);
if (pciehp_poll_mode)
int_poll_timeout(ctrl->poll_timer.data);
next reply other threads:[~2017-02-23 20:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-23 20:28 Yinghai Lu [this message]
2017-02-23 21:55 ` James Puthukattukaran
2017-02-23 21:53 ` yinghai.lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170223202851.1912-1-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=ashok.raj@intel.com \
--cc=bhelgaas@google.com \
--cc=james.puthukattukaran@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=yinghai.lu@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®