From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [PATCH 05/10] Input: eeti-ts - switch to using managed resources
Date: Tue, 28 Feb 2017 14:46:27 -0800 [thread overview]
Message-ID: <20170228224632.3401-5-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20170228224632.3401-1-dmitry.torokhov@gmail.com>
Using devm_* APIs simpifies error handling and device teardown.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/touchscreen/eeti_ts.c | 70 ++++++++++++-------------------------
1 file changed, 22 insertions(+), 48 deletions(-)
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index b472e0e467e8..e99e4fec93f5 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -157,13 +157,14 @@ static void eeti_ts_close(struct input_dev *dev)
}
static int eeti_ts_probe(struct i2c_client *client,
- const struct i2c_device_id *idp)
+ const struct i2c_device_id *idp)
{
- struct eeti_ts_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct device *dev = &client->dev;
+ struct eeti_ts_platform_data *pdata = dev_get_platdata(dev);
struct eeti_ts *eeti;
struct input_dev *input;
unsigned int irq_flags;
- int err = -ENOMEM;
+ int error;
/*
* In contrast to what's described in the datasheet, there seems
@@ -172,18 +173,18 @@ static int eeti_ts_probe(struct i2c_client *client,
* for interrupts to occur.
*/
- eeti = kzalloc(sizeof(*eeti), GFP_KERNEL);
+ eeti = devm_kzalloc(dev, sizeof(*eeti), GFP_KERNEL);
if (!eeti) {
- dev_err(&client->dev, "failed to allocate driver data\n");
+ dev_err(dev, "failed to allocate driver data\n");
return -ENOMEM;
}
mutex_init(&eeti->mutex);
- input = input_allocate_device();
+ input = devm_input_allocate_device(dev);
if (!input) {
- dev_err(&client->dev, "Failed to allocate input device.\n");
- goto err1;
+ dev_err(dev, "Failed to allocate input device.\n");
+ return -ENOMEM;
}
input_set_capability(input, EV_KEY, BTN_TOUCH);
@@ -194,7 +195,6 @@ static int eeti_ts_probe(struct i2c_client *client,
input->name = client->name;
input->id.bustype = BUS_I2C;
- input->dev.parent = &client->dev;
input->open = eeti_ts_open;
input->close = eeti_ts_close;
@@ -203,9 +203,10 @@ static int eeti_ts_probe(struct i2c_client *client,
eeti->irq_gpio = pdata->irq_gpio;
eeti->irq = gpio_to_irq(pdata->irq_gpio);
- err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name);
- if (err < 0)
- goto err1;
+ error = devm_gpio_request_one(dev, pdata->irq_gpio, GPIOF_IN,
+ client->name);
+ if (error)
+ return error;
eeti->irq_active_high = pdata->irq_active_high;
@@ -216,15 +217,16 @@ static int eeti_ts_probe(struct i2c_client *client,
i2c_set_clientdata(client, eeti);
input_set_drvdata(input, eeti);
- err = input_register_device(input);
- if (err)
- goto err2;
+ error = input_register_device(input);
+ if (error)
+ return error;
- err = request_irq(eeti->irq, eeti_ts_isr, irq_flags,
- client->name, eeti);
- if (err) {
- dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
- goto err3;
+ error = devm_request_irq(dev, eeti->irq, eeti_ts_isr, irq_flags,
+ client->name, eeti);
+ if (error) {
+ dev_err(dev, "Unable to request touchscreen IRQ: %d\n",
+ error);
+ return error;
}
/*
@@ -234,33 +236,6 @@ static int eeti_ts_probe(struct i2c_client *client,
eeti_ts_stop(eeti);
return 0;
-
-err3:
- input_unregister_device(input);
- input = NULL; /* so we dont try to free it below */
-err2:
- gpio_free(pdata->irq_gpio);
-err1:
- input_free_device(input);
- kfree(eeti);
- return err;
-}
-
-static int eeti_ts_remove(struct i2c_client *client)
-{
- struct eeti_ts *eeti = i2c_get_clientdata(client);
-
- free_irq(eeti->irq, eeti);
- /*
- * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
- * so that device still works if we reload the driver.
- */
- enable_irq(eeti->irq);
-
- input_unregister_device(eeti->input);
- kfree(eeti);
-
- return 0;
}
static int __maybe_unused eeti_ts_suspend(struct device *dev)
@@ -315,7 +290,6 @@ static struct i2c_driver eeti_ts_driver = {
.pm = &eeti_ts_pm,
},
.probe = eeti_ts_probe,
- .remove = eeti_ts_remove,
.id_table = eeti_ts_id,
};
--
2.11.0.483.g087da7b7c-goog
next prev parent reply other threads:[~2017-03-01 1:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-28 22:46 [PATCH 01/10] Input: eeti_ts - rename eeti_ts_priv to eeti_ts Dmitry Torokhov
2017-02-28 22:46 ` [PATCH 02/10] Input: eeti_ts - use BIT(n) Dmitry Torokhov
2017-02-28 22:46 ` [PATCH 03/10] Input: eeti_ts - use get_unaligned_be16() to retrieve data Dmitry Torokhov
2017-02-28 22:46 ` [PATCH 04/10] Input: eeti_ts - use input_set_capability() Dmitry Torokhov
2017-02-28 22:46 ` Dmitry Torokhov [this message]
2017-02-28 22:46 ` [PATCH 06/10] Input: eeti_ts - respect interrupt set in client structure Dmitry Torokhov
2017-02-28 22:46 ` [PATCH 07/10] Input: eeti_ts - use gpio_get_value_cansleep Dmitry Torokhov
2017-02-28 22:46 ` [PATCH 08/10] Input: eeti_ts - switch to using threaded interrupt Dmitry Torokhov
2017-02-28 22:46 ` [PATCH 09/10] Input: eeti_ts - expect platform code to set interrupt trigger Dmitry Torokhov
2017-02-28 22:46 ` [PATCH 10/10] Input: eeti_ts - switch to gpiod API Dmitry Torokhov
2017-03-01 9:28 ` [PATCH 01/10] Input: eeti_ts - rename eeti_ts_priv to eeti_ts Daniel Mack
2017-03-01 17:34 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170228224632.3401-5-dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=daniel@zonque.org \
--cc=haojian.zhuang@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robert.jarzmik@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome