mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Wenyou.Yang@microchip.com, linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] watchdog: sama5d4: fix race condition
Date: Thu, 2 Mar 2017 18:54:30 +0100	[thread overview]
Message-ID: <20170302175430.4b3j7ptij525vrhm@piout.net> (raw)
In-Reply-To: <20170302174224.GC28554@roeck-us.net>

On 02/03/2017 at 09:42:24 -0800, Guenter Roeck wrote:
> On Thu, Mar 02, 2017 at 06:31:12PM +0100, Alexandre Belloni wrote:
> > WDT_MR and WDT_CR must not updated within three slow clock periods after
> > the last ping (write to WDT_CR or WDT_MR). Ensure enough time has elapsed
> > before writing those registers.
> > wdt_write() waits for 4 periods to ensure at least 3 edges are seen by the
> > IP.
> > 
> 
> Would it be possible to use min_hw_heartbeat_ms for this purpose ?
> 

I don't think so unless you want the core to also use that delay between
__watchdog_ping, watchdog_start, watchdog_set_timeout and watchdog_stop.
Currently, it is only between two calls of __watchdog_ping,

> Thanks,
> Guenter
> 
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > ---
> >  drivers/watchdog/sama5d4_wdt.c | 33 +++++++++++++++++++++++++++++----
> >  1 file changed, 29 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
> > index 5cee20caca78..362fd229786d 100644
> > --- a/drivers/watchdog/sama5d4_wdt.c
> > +++ b/drivers/watchdog/sama5d4_wdt.c
> > @@ -6,6 +6,7 @@
> >   * Licensed under GPLv2.
> >   */
> >  
> > +#include <linux/delay.h>
> >  #include <linux/interrupt.h>
> >  #include <linux/io.h>
> >  #include <linux/kernel.h>
> > @@ -29,6 +30,7 @@ struct sama5d4_wdt {
> >  	struct watchdog_device	wdd;
> >  	void __iomem		*reg_base;
> >  	u32			mr;
> > +	unsigned long		last_ping;
> >  };
> >  
> >  static int wdt_timeout = WDT_DEFAULT_TIMEOUT;
> > @@ -49,8 +51,29 @@ MODULE_PARM_DESC(nowayout,
> >  #define wdt_read(wdt, field) \
> >  	readl_relaxed((wdt)->reg_base + (field))
> >  
> > -#define wdt_write(wtd, field, val) \
> > -	writel_relaxed((val), (wdt)->reg_base + (field))
> > +/* 4 slow clock periods is 4/32768 = 122.07µs*/
> > +#define WDT_DELAY	usecs_to_jiffies(123)
> > +
> > +static void wdt_write(struct sama5d4_wdt *wdt, u32 field, u32 val)
> > +{
> > +	/*
> > +	 * WDT_CR and WDT_MR must not be modified within three slow clock
> > +	 * periods following a restart of the watchdog performed by a write
> > +	 * access in WDT_CR.
> > +	 */
> > +	while (time_before(jiffies, wdt->last_ping + WDT_DELAY))
> > +		usleep_range(30, 125);
> > +	writel_relaxed(val, wdt->reg_base + field);
> > +	wdt->last_ping = jiffies;
> > +}
> > +
> > +static void wdt_write_nosleep(struct sama5d4_wdt *wdt, u32 field, u32 val)
> > +{
> > +	if (time_before(jiffies, wdt->last_ping + WDT_DELAY))
> > +		udelay(123);
> > +	writel_relaxed(val, wdt->reg_base + field);
> > +	wdt->last_ping = jiffies;
> > +}
> >  
> >  static int sama5d4_wdt_start(struct watchdog_device *wdd)
> >  {
> > @@ -164,11 +187,12 @@ static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
> >  	 * Else, we have to disable it properly.
> >  	 */
> >  	if (wdt_enabled) {
> > -		wdt_write(wdt, AT91_WDT_MR, wdt->mr);
> > +		wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
> >  	} else {
> >  		reg = wdt_read(wdt, AT91_WDT_MR);
> >  		if (!(reg & AT91_WDT_WDDIS))
> > -			wdt_write(wdt, AT91_WDT_MR, reg | AT91_WDT_WDDIS);
> > +			wdt_write_nosleep(wdt, AT91_WDT_MR,
> > +					  reg | AT91_WDT_WDDIS);
> >  	}
> >  	return 0;
> >  }
> > @@ -193,6 +217,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
> >  	wdd->ops = &sama5d4_wdt_ops;
> >  	wdd->min_timeout = MIN_WDT_TIMEOUT;
> >  	wdd->max_timeout = MAX_WDT_TIMEOUT;
> > +	wdt->last_ping = jiffies;
> >  
> >  	watchdog_set_drvdata(wdd, wdt);
> >  
> > -- 
> > 2.11.0
> > 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

  reply	other threads:[~2017-03-02 17:55 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-02 17:31 [PATCH 0/4] watchdog: sama5d4: fix issues Alexandre Belloni
2017-03-02 17:31 ` [PATCH 1/4] watchdog: sama5d4: fix WDDIS handling Alexandre Belloni
2017-03-04 15:04   ` Guenter Roeck
2017-03-07  2:05   ` Wenyou.Yang
2017-03-02 17:31 ` [PATCH 2/4] watchdog: sama5d4: fix race condition Alexandre Belloni
2017-03-02 17:42   ` Guenter Roeck
2017-03-02 17:54     ` Alexandre Belloni [this message]
2017-03-04 15:05   ` Guenter Roeck
2017-03-07  2:06   ` Wenyou.Yang
2017-03-02 17:31 ` [PATCH 3/4] watchodg: sama5d4: simplify probe Alexandre Belloni
2017-03-02 19:29   ` Alexander Dahl
2017-03-03  8:03   ` Thomas Petazzoni
2017-03-03  9:29     ` Alexandre Belloni
2017-03-03 14:14       ` Guenter Roeck
2017-03-04 15:06   ` Guenter Roeck
2017-03-02 17:31 ` [PATCH 4/4] watchdog: sama5d4: Add comment explaining what happens on resume Alexandre Belloni
2017-03-04 15:07   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170302175430.4b3j7ptij525vrhm@piout.net \
    --to=alexandre.belloni@free-electrons.com \
    --cc=Wenyou.Yang@microchip.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=nicolas.ferre@microchip.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®