From: Jiri Slaby <jslaby@suse.cz>
To: james.smart@broadcom.com
Cc: linux-kernel@vger.kernel.org, Tomas Jasek <tomsik68@gmail.com>,
Jiri Slaby <jslaby@suse.cz>,
Dick Kennedy <dick.kennedy@broadcom.com>,
"James E.J. Bottomley" <jejb@linux.vnet.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org
Subject: [PATCH] scsi: lpfc: replace init_timer by setup_timer
Date: Fri, 3 Mar 2017 13:45:48 +0100 [thread overview]
Message-ID: <20170303124548.30176-1-jslaby@suse.cz> (raw)
From: Tomas Jasek <tomsik68@gmail.com>
This patch shortens every init_timer in lpfc module
followed by function and data assignment using setup_timer.
This is purely cleanup patch, it does not add new functionality
nor remove any existing functionality.
An init_timer call in this form:
init_timer(&vport->fc_disctmo);
vport->fc_disctmo.function = lpfc_disc_timeout;
vport->fc_disctmo.data = vport;
is shortened to:
setup_timer(&vport->fc_disctmo, lpfc_disc_timeout, vport);
It increases readability and reduces chances of mistakes done by
developers.
Signed-off-by: Tomas Jasek <tomsik68@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
---
drivers/scsi/lpfc/lpfc_hbadisc.c | 5 ++---
drivers/scsi/lpfc/lpfc_init.c | 47 +++++++++++++++-------------------------
2 files changed, 19 insertions(+), 33 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 194a14d5f8a9..2612dac75186 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4344,9 +4344,8 @@ lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
{
INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp);
INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp);
- init_timer(&ndlp->nlp_delayfunc);
- ndlp->nlp_delayfunc.function = lpfc_els_retry_delay;
- ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
+ setup_timer(&ndlp->nlp_delayfunc, lpfc_els_retry_delay,
+ (unsigned long)ndlp);
ndlp->nlp_DID = did;
ndlp->vport = vport;
ndlp->phba = vport->phba;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0ee429d773f3..f395f2e4aa97 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3734,17 +3734,14 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
INIT_LIST_HEAD(&vport->rcv_buffer_list);
spin_lock_init(&vport->work_port_lock);
- init_timer(&vport->fc_disctmo);
- vport->fc_disctmo.function = lpfc_disc_timeout;
- vport->fc_disctmo.data = (unsigned long)vport;
+ setup_timer(&vport->fc_disctmo, lpfc_disc_timeout,
+ (unsigned long)vport);
- init_timer(&vport->els_tmofunc);
- vport->els_tmofunc.function = lpfc_els_timeout;
- vport->els_tmofunc.data = (unsigned long)vport;
+ setup_timer(&vport->els_tmofunc, lpfc_els_timeout,
+ (unsigned long)vport);
- init_timer(&vport->delayed_disc_tmo);
- vport->delayed_disc_tmo.function = lpfc_delayed_disc_tmo;
- vport->delayed_disc_tmo.data = (unsigned long)vport;
+ setup_timer(&vport->delayed_disc_tmo, lpfc_delayed_disc_tmo,
+ (unsigned long)vport);
error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
if (error)
@@ -5406,21 +5403,15 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
INIT_LIST_HEAD(&phba->luns);
/* MBOX heartbeat timer */
- init_timer(&psli->mbox_tmo);
- psli->mbox_tmo.function = lpfc_mbox_timeout;
- psli->mbox_tmo.data = (unsigned long) phba;
+ setup_timer(&psli->mbox_tmo, lpfc_mbox_timeout, (unsigned long)phba);
/* Fabric block timer */
- init_timer(&phba->fabric_block_timer);
- phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
- phba->fabric_block_timer.data = (unsigned long) phba;
+ setup_timer(&phba->fabric_block_timer, lpfc_fabric_block_timeout,
+ (unsigned long)phba);
/* EA polling mode timer */
- init_timer(&phba->eratt_poll);
- phba->eratt_poll.function = lpfc_poll_eratt;
- phba->eratt_poll.data = (unsigned long) phba;
+ setup_timer(&phba->eratt_poll, lpfc_poll_eratt,
+ (unsigned long)phba);
/* Heartbeat timer */
- init_timer(&phba->hb_tmofunc);
- phba->hb_tmofunc.function = lpfc_hb_timeout;
- phba->hb_tmofunc.data = (unsigned long)phba;
+ setup_timer(&phba->hb_tmofunc, lpfc_hb_timeout, (unsigned long)phba);
return 0;
}
@@ -5446,9 +5437,8 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
*/
/* FCP polling mode timer */
- init_timer(&phba->fcp_poll_timer);
- phba->fcp_poll_timer.function = lpfc_poll_timeout;
- phba->fcp_poll_timer.data = (unsigned long) phba;
+ setup_timer(&phba->fcp_poll_timer, lpfc_poll_timeout,
+ (unsigned long)phba);
/* Host attention work mask setup */
phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
@@ -5617,14 +5607,11 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
* Initialize timers used by driver
*/
- init_timer(&phba->rrq_tmr);
- phba->rrq_tmr.function = lpfc_rrq_timeout;
- phba->rrq_tmr.data = (unsigned long)phba;
+ setup_timer(&phba->rrq_tmr, lpfc_rrq_timeout, (unsigned long)phba);
/* FCF rediscover timer */
- init_timer(&phba->fcf.redisc_wait);
- phba->fcf.redisc_wait.function = lpfc_sli4_fcf_redisc_wait_tmo;
- phba->fcf.redisc_wait.data = (unsigned long)phba;
+ setup_timer(&phba->fcf.redisc_wait, lpfc_sli4_fcf_redisc_wait_tmo,
+ (unsigned long)phba);
/*
* Control structure for handling external multi-buffer mailbox
--
2.12.0
next reply other threads:[~2017-03-03 12:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 12:45 Jiri Slaby [this message]
2017-03-03 15:20 ` James Smart
2017-03-07 3:49 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170303124548.30176-1-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=dick.kennedy@broadcom.com \
--cc=james.smart@broadcom.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=tomsik68@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®