mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: James Hogan <james.hogan@imgtec.com>
To: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: <linus.walleij@linaro.org>, <gnurou@gmail.com>,
	<mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
	<robh+dt@kernel.org>, <ralf@linux-mips.org>,
	<linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
	<linux-mips@linux-mips.org>
Subject: Re: [PATCH 2/2] MIPS: NI 169445 board support
Date: Mon, 6 Mar 2017 23:04:13 +0000	[thread overview]
Message-ID: <20170306230413.GF2878@jhogan-linux.le.imgtec.org> (raw)
In-Reply-To: <1488830761-681-3-git-send-email-nathan.sullivan@ni.com>

[-- Attachment #1: Type: text/plain, Size: 5726 bytes --]

Hi Nathan,

On Mon, Mar 06, 2017 at 02:06:01PM -0600, Nathan Sullivan wrote:
> Support the National Instruments 169445 board.
> 
> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
> ---
>  Documentation/devicetree/bindings/mips/ni.txt   |   7 ++
>  arch/mips/boot/dts/Makefile                     |   1 +
>  arch/mips/boot/dts/ni/169445.dts                | 101 ++++++++++++++++++++
>  arch/mips/boot/dts/ni/Makefile                  |   7 ++
>  arch/mips/configs/generic/board-ni169445.config | 117 ++++++++++++++++++++++++
>  arch/mips/generic/Kconfig                       |   6 ++
>  arch/mips/generic/vmlinux.its.S                 |  25 +++++
>  7 files changed, 264 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mips/ni.txt
>  create mode 100644 arch/mips/boot/dts/ni/169445.dts
>  create mode 100644 arch/mips/boot/dts/ni/Makefile
>  create mode 100644 arch/mips/configs/generic/board-ni169445.config
> 

nice :)

I reckon an entry in MAINTAINERS listing the board specific
files/directories would probably be worthwhile too.

> diff --git a/arch/mips/configs/generic/board-ni169445.config b/arch/mips/configs/generic/board-ni169445.config
> new file mode 100644
> index 0000000..2c950a8
> --- /dev/null
> +++ b/arch/mips/configs/generic/board-ni169445.config
> @@ -0,0 +1,117 @@
> +CONFIG_MIPS_GENERIC=y
> +CONFIG_FIT_IMAGE_FDT_NI169445=y
> +CONFIG_CPU_LITTLE_ENDIAN=y
> +CONFIG_CPU_MIPS32_R2=y
> +CONFIG_HZ_100=y
> +CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
> +# CONFIG_SWAP is not set
> +CONFIG_SYSVIPC=y
> +CONFIG_HZ_PERIODIC=y
> +CONFIG_NO_HZ=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_LOG_BUF_SHIFT=15
> +CONFIG_BPF_SYSCALL=y
> +# CONFIG_SHMEM is not set
> +CONFIG_USERFAULTFD=y
> +CONFIG_EMBEDDED=y
> +# CONFIG_COMPAT_BRK is not set
> +CONFIG_SLAB=y
> +CONFIG_PROFILING=y
> +CONFIG_CC_STACKPROTECTOR_REGULAR=y
> +# CONFIG_LBDAF is not set
> +# CONFIG_BLK_DEV_BSG is not set
> +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> +# CONFIG_SUSPEND is not set
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> +# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_BEET is not set
> +# CONFIG_INET_DIAG is not set
> +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
> +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
> +CONFIG_NETFILTER=y
> +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
> +CONFIG_IP_NF_IPTABLES=y
> +CONFIG_IP_NF_FILTER=y
> +CONFIG_IP6_NF_IPTABLES=y
> +CONFIG_IP6_NF_FILTER=y
> +# CONFIG_WIRELESS is not set
> +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
> +CONFIG_MTD=y
> +CONFIG_MTD_CMDLINE_PARTS=y
> +CONFIG_MTD_BLOCK_RO=y
> +CONFIG_MTD_NAND=y
> +CONFIG_MTD_NAND_ECC_BCH=y
> +CONFIG_MTD_NAND_GPIO=y
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_BLOCK=y
> +# CONFIG_BLK_DEV is not set
> +CONFIG_NETDEVICES=y
> +# CONFIG_NET_VENDOR_ALACRITECH is not set
> +# CONFIG_NET_VENDOR_AMAZON is not set
> +# CONFIG_NET_VENDOR_AQUANTIA is not set
> +# CONFIG_NET_VENDOR_ARC is not set
> +# CONFIG_NET_CADENCE is not set
> +# CONFIG_NET_VENDOR_BROADCOM is not set
> +# CONFIG_NET_VENDOR_EZCHIP is not set
> +# CONFIG_NET_VENDOR_INTEL is not set
> +# CONFIG_NET_VENDOR_MARVELL is not set
> +# CONFIG_NET_VENDOR_MICREL is not set
> +# CONFIG_NET_VENDOR_NATSEMI is not set
> +# CONFIG_NET_VENDOR_NETRONOME is not set
> +# CONFIG_NET_VENDOR_QUALCOMM is not set
> +# CONFIG_NET_VENDOR_RENESAS is not set
> +# CONFIG_NET_VENDOR_ROCKER is not set
> +# CONFIG_NET_VENDOR_SAMSUNG is not set
> +# CONFIG_NET_VENDOR_SEEQ is not set
> +# CONFIG_NET_VENDOR_SOLARFLARE is not set
> +# CONFIG_NET_VENDOR_SMSC is not set
> +CONFIG_STMMAC_ETH=y
> +CONFIG_DWMAC_DWC_QOS_ETH=y
> +# CONFIG_NET_VENDOR_VIA is not set
> +# CONFIG_NET_VENDOR_WIZNET is not set
> +# CONFIG_NET_VENDOR_XILINX is not set
> +# CONFIG_WLAN is not set
> +# CONFIG_INPUT_KEYBOARD is not set
> +# CONFIG_INPUT_MOUSE is not set
> +# CONFIG_SERIO is not set
> +# CONFIG_VT is not set
> +CONFIG_LEGACY_PTY_COUNT=32
> +CONFIG_SERIAL_8250=y
> +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_NR_UARTS=2
> +CONFIG_SERIAL_8250_RUNTIME_UARTS=2
> +CONFIG_SERIAL_OF_PLATFORM=y
> +# CONFIG_PTP_1588_CLOCK is not set
> +CONFIG_GPIOLIB=y
> +CONFIG_GPIO_SYSFS=y
> +CONFIG_GPIO_GENERIC_PLATFORM=y
> +# CONFIG_HWMON is not set
> +# CONFIG_HID is not set
> +# CONFIG_USB_SUPPORT is not set
> +# CONFIG_MIPS_PLATFORM_DEVICES is not set
> +# CONFIG_IOMMU_SUPPORT is not set
> +CONFIG_FANOTIFY=y
> +CONFIG_UBIFS_FS=y
> +CONFIG_SQUASHFS=y
> +CONFIG_SQUASHFS_XATTR=y
> +# CONFIG_SQUASHFS_ZLIB is not set
> +CONFIG_SQUASHFS_LZO=y
> +# CONFIG_NETWORK_FILESYSTEMS is not set
> +CONFIG_PRINTK_TIME=y
> +CONFIG_DEBUG_INFO=y
> +CONFIG_DEBUG_INFO_REDUCED=y
> +CONFIG_DEBUG_FS=y
> +# CONFIG_SCHED_DEBUG is not set
> +CONFIG_RCU_TRACE=y
> +# CONFIG_FTRACE is not set
> +# CONFIG_CRYPTO_ECHAINIV is not set
> +# CONFIG_CRYPTO_HW is not set

I think this file is intended to be more minimal than a normal
defconfig, only enabling hardware device drivers (and related options)
and FIT IMAGE on top of the generic_defconfig and other snippets in this
directory, e.g. have you seen the other board config examples here?

https://git.linux-mips.org/cgit/linux-mti.git/tree/arch/mips/configs/generic?h=eng

If specific generic kernel features are desired we should probably
consider whether it makes sense to add them to the generic_defconfig so
other generic boards can benefit.

Cheers
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

  reply	other threads:[~2017-03-06 23:29 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-06 20:05 [PATCH v2] " Nathan Sullivan
2017-03-06 20:06 ` [PATCH 1/2] gpio: mmio: add support for NI 169445 NAND GPIO Nathan Sullivan
2017-03-15  9:33   ` Linus Walleij
2017-03-06 20:06 ` [PATCH 2/2] MIPS: NI 169445 board support Nathan Sullivan
2017-03-06 23:04   ` James Hogan [this message]
2017-03-06 23:14     ` Nathan Sullivan
2017-03-15  9:37   ` Linus Walleij
2017-03-08 19:35 [PATCH v3] " Nathan Sullivan
2017-03-08 19:35 ` [PATCH 2/2] MIPS: " Nathan Sullivan
2017-03-14 16:13 [PATCH v4] " Nathan Sullivan
2017-03-14 16:13 ` [PATCH 2/2] MIPS: " Nathan Sullivan
2017-03-23 22:29   ` Rob Herring
2017-03-24 14:46     ` Nathan Sullivan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170306230413.GF2878@jhogan-linux.le.imgtec.org \
    --to=james.hogan@imgtec.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gnurou@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=mark.rutland@arm.com \
    --cc=nathan.sullivan@ni.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome