From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-kernel@vger.kernel.org, rtc-linux@googlegroups.com,
Alessandro Zummo <a.zummo@towertech.it>
Subject: Re: [PATCH 00/13] rtc: Add OF device table to I2C drivers that are missing it
Date: Thu, 9 Mar 2017 01:30:06 +0100 [thread overview]
Message-ID: <20170309003006.j5y7zabuto7er676@piout.net> (raw)
In-Reply-To: <20170303142925.17915-1-javier@osg.samsung.com>
On 03/03/2017 at 11:29:11 -0300, Javier Martinez Canillas wrote:
> Hello,
>
> This series add OF device ID tables to RTC I2C drivers whose devices are
> either used in Device Tree source files or are listed in binding docs as
> a compatible string.
>
> That's done because the plan is to change the I2C core to report proper OF
> modaliases instead of always reporting a MODALIAS=i2c:<foo> regardless if
> a device was registered via DT or using the legacy platform data.
>
> So these patches will make sure that RTC I2C drivers modules will continue
> to be autoloaded once the I2C core is changed to report proper OF modalias.
>
> Best regards,
> Javier
>
>
> Javier Martinez Canillas (13):
> rtc: rv8803: Add OF device ID table
> rtc: rv3029: Add OF device ID table
> rtc: bq32k: Add OF device ID table
> rtc: ds1307: Add OF device ID table
> rtc: rx8010: Add OF device ID table
> rtc: ds3232: Add OF device ID table
> rtc: rtc-ds1672: Add OF device ID table
> rtc: ds1374: Set .of_match_table to OF device ID table
> rtc: isl1208: Add OF device ID table
> rtc: s35390a: Add OF device ID table
> rtc: rx8581: Add OF device ID table
> rtc: m41t80: Add OF device ID table
> rtc: rs5c372: Add OF device ID table
>
All applied, thanks!
> drivers/rtc/rtc-bq32k.c | 7 +++++
> drivers/rtc/rtc-ds1307.c | 68 +++++++++++++++++++++++++++++++++++++++++++++-
> drivers/rtc/rtc-ds1374.c | 1 +
> drivers/rtc/rtc-ds1672.c | 9 +++++-
> drivers/rtc/rtc-ds3232.c | 7 +++++
> drivers/rtc/rtc-isl1208.c | 12 ++++++--
> drivers/rtc/rtc-m41t80.c | 63 ++++++++++++++++++++++++++++++++++++++++--
> drivers/rtc/rtc-rs5c372.c | 37 ++++++++++++++++++++++++-
> drivers/rtc/rtc-rv3029c2.c | 9 ++++++
> drivers/rtc/rtc-rv8803.c | 21 +++++++++++++-
> drivers/rtc/rtc-rx8010.c | 7 +++++
> drivers/rtc/rtc-rx8581.c | 7 +++++
> drivers/rtc/rtc-s35390a.c | 8 ++++++
> 13 files changed, 248 insertions(+), 8 deletions(-)
>
> --
> 2.9.3
>
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
prev parent reply other threads:[~2017-03-09 3:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 14:29 Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 01/13] rtc: rv8803: Add OF device ID table Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 02/13] rtc: rv3029: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 03/13] rtc: bq32k: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 04/13] rtc: ds1307: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 05/13] rtc: rx8010: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 06/13] rtc: ds3232: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 07/13] rtc: rtc-ds1672: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 08/13] rtc: ds1374: Set .of_match_table to " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 09/13] rtc: isl1208: Add " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 10/13] rtc: s35390a: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 11/13] rtc: rx8581: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 12/13] rtc: m41t80: " Javier Martinez Canillas
2017-03-03 14:29 ` [PATCH 13/13] rtc: rs5c372: " Javier Martinez Canillas
2017-03-03 15:01 ` [PATCH 00/13] rtc: Add OF device table to I2C drivers that are missing it Alexandre Belloni
2017-03-03 15:27 ` Javier Martinez Canillas
2017-03-03 16:04 ` Alexandre Belloni
2017-03-03 17:08 ` Javier Martinez Canillas
2017-03-09 0:30 ` Alexandre Belloni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170309003006.j5y7zabuto7er676@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=a.zummo@towertech.it \
--cc=javier@osg.samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®