From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754644AbdCIKIE (ORCPT ); Thu, 9 Mar 2017 05:08:04 -0500 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:51354 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754505AbdCIKGY (ORCPT ); Thu, 9 Mar 2017 05:06:24 -0500 From: Chen-Yu Tsai To: Maxime Ripard , David Airlie Cc: Chen-Yu Tsai , dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 11/11] ARM: dts: sun6i: Enable tcon0 by default Date: Thu, 9 Mar 2017 18:05:34 +0800 Message-Id: <20170309100534.14023-12-wens@csie.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170309100534.14023-1-wens@csie.org> References: <20170309100534.14023-1-wens@csie.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org tcon0 contains a muxing register used to mux tcon output to downstream hdmi or mipi dsi encoders. tcon0 must be available for the mux to be configured. Whether the display subsystem is enabled or not is now solely controlled by the display-engine node. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 1 - arch/arm/boot/dts/sun6i-a31.dtsi | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index f094eeb6c499..fb237ce60198 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -320,7 +320,6 @@ &tcon0 { pinctrl-names = "default"; pinctrl-0 = <&lcd0_rgb888_pins>; - status = "okay"; }; &tcon0_out { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 40f020824ccc..0ddcffab594e 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -265,7 +265,6 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; - status = "disabled"; ports { #address-cells = <1>; -- 2.11.0