From: "Gabriel L. Somlo" <gsomlo@gmail.com>
To: "Michael S. Tsirkin" <mst@redhat.com>
Cc: linux-kernel@vger.kernel.org,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>,
"Jonathan Corbet" <corbet@lwn.net>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Ingo Molnar" <mingo@redhat.com>,
"H. Peter Anvin" <hpa@zytor.com>,
x86@kernel.org, kvm@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [PATCH] kvm: better MWAIT emulation for guests
Date: Thu, 9 Mar 2017 19:51:27 -0500 [thread overview]
Message-ID: <20170310005126.GA19516@foober.ini.cmu.edu> (raw)
In-Reply-To: <1489098555-23856-1-git-send-email-mst@redhat.com>
On Fri, Mar 10, 2017 at 12:29:31AM +0200, Michael S. Tsirkin wrote:
> Some guests call mwait without checking the cpu flags. We currently
> emulate that as a NOP but on VMX we can do better: let guest stop the
> CPU until timer or IPI. CPU will be busy but that isn't any worse than
> a NOP emulation.
Are you getting an IPI if another VCPU writes to the MONITOR-ed memory
location? If not, you'd be waking up too late and fail to meet the
specified behavior of the MONITOR/MWAIT instruction pair.
> Note that mwait within guests is not the same as on real hardware
> because you must halt if you want to go deep into sleep. Thus it isn't
> a good idea to use the regular MWAIT flag in CPUID for that. Add a flag
> in the hypervisor leaf instead.
Is it a good idea to advertise MWAIT capability to guests? The
misbehaving ones will call it willy-nilly, true, but aren't compliant
ones better off falling back to some alternative method (typically
using a HLT-based idle loop instead of a MONITOR/MWAIT based one) ?
Thanks,
--Gabriel
>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> ---
> Documentation/virtual/kvm/cpuid.txt | 3 +++
> arch/x86/include/uapi/asm/kvm_para.h | 1 +
> arch/x86/kvm/cpuid.c | 3 +++
> arch/x86/kvm/vmx.c | 4 ----
> 4 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/virtual/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt
> index 3c65feb..5caa234 100644
> --- a/Documentation/virtual/kvm/cpuid.txt
> +++ b/Documentation/virtual/kvm/cpuid.txt
> @@ -54,6 +54,9 @@ KVM_FEATURE_PV_UNHALT || 7 || guest checks this feature bit
> || || before enabling paravirtualized
> || || spinlock support.
> ------------------------------------------------------------------------------
> +KVM_FEATURE_MWAIT || 8 || guest can use monitor/mwait
> + || || to halt the VCPU.
> +------------------------------------------------------------------------------
> KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side
> || || per-cpu warps are expected in
> || || kvmclock.
> diff --git a/arch/x86/include/uapi/asm/kvm_para.h b/arch/x86/include/uapi/asm/kvm_para.h
> index cff0bb6..9cc77a7 100644
> --- a/arch/x86/include/uapi/asm/kvm_para.h
> +++ b/arch/x86/include/uapi/asm/kvm_para.h
> @@ -24,6 +24,7 @@
> #define KVM_FEATURE_STEAL_TIME 5
> #define KVM_FEATURE_PV_EOI 6
> #define KVM_FEATURE_PV_UNHALT 7
> +#define KVM_FEATURE_MWAIT 8
>
> /* The last 8 bits are used to indicate how to interpret the flags field
> * in pvclock structure. If no bits are set, all flags are ignored.
> diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
> index efde6cc..fe3d292 100644
> --- a/arch/x86/kvm/cpuid.c
> +++ b/arch/x86/kvm/cpuid.c
> @@ -594,6 +594,9 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
> if (sched_info_on())
> entry->eax |= (1 << KVM_FEATURE_STEAL_TIME);
>
> + if (this_cpu_has(X86_FEATURE_MWAIT))
> + entry->eax = (1 << KVM_FEATURE_MWAIT);
> +
> entry->ebx = 0;
> entry->ecx = 0;
> entry->edx = 0;
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 4bfe349..b167aba 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -3547,13 +3547,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
> CPU_BASED_USE_IO_BITMAPS |
> CPU_BASED_MOV_DR_EXITING |
> CPU_BASED_USE_TSC_OFFSETING |
> - CPU_BASED_MWAIT_EXITING |
> - CPU_BASED_MONITOR_EXITING |
> CPU_BASED_INVLPG_EXITING |
> CPU_BASED_RDPMC_EXITING;
>
> - printk(KERN_ERR "cleared CPU_BASED_MWAIT_EXITING + CPU_BASED_MONITOR_EXITING\n");
> -
> opt = CPU_BASED_TPR_SHADOW |
> CPU_BASED_USE_MSR_BITMAPS |
> CPU_BASED_ACTIVATE_SECONDARY_CONTROLS;
> --
> MST
next prev parent reply other threads:[~2017-03-10 0:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-09 22:29 Michael S. Tsirkin
2017-03-10 0:51 ` Gabriel L. Somlo [this message]
2017-03-10 1:12 ` Michael S. Tsirkin
2017-03-13 7:44 ` Wanpeng Li
2017-03-10 23:46 ` Jim Mattson
2017-03-12 0:01 ` Michael S. Tsirkin
2017-03-12 21:18 ` Gabriel L. Somlo
2017-03-13 15:46 ` Radim Krčmář
2017-03-13 16:08 ` Michael S. Tsirkin
2017-03-13 19:39 ` Radim Krčmář
2017-03-13 20:03 ` Michael S. Tsirkin
2017-03-13 21:43 ` Radim Krčmář
2017-03-15 18:14 ` Gabriel L. Somlo
2017-03-15 18:29 ` Michael S. Tsirkin
2017-03-15 19:01 ` Gabriel L. Somlo
2017-03-15 19:05 ` Michael S. Tsirkin
2017-03-15 19:29 ` Michael S. Tsirkin
2017-03-15 19:43 ` Gabriel L. Somlo
2017-03-15 20:13 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170310005126.GA19516@foober.ini.cmu.edu \
--to=gsomlo@gmail.com \
--cc=corbet@lwn.net \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®