Re: [PATCH v2] mfd: intel_soc_pmic_core: Remove unnecessary function

[Lee Jones <lee.jones@linaro.org>]

On Tue, 21 Feb 2017, Andy Shevchenko wrote:

> Since commit 845c877009cf ("i2c / ACPI: Assign IRQ for devices that have
> GpioInt automatically") I2C core assigns interrupt line to I2C slave
> devices with regarding to GpioInt() resources.
> 
> There is no need to repeat this in the driver.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> - remove unused variable
>  drivers/mfd/intel_soc_pmic_core.c | 26 +-------------------------
>  1 file changed, 1 insertion(+), 25 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c
> index 12d6ebb4ae5d..3b5583586662 100644
> --- a/drivers/mfd/intel_soc_pmic_core.c
> +++ b/drivers/mfd/intel_soc_pmic_core.c
> @@ -44,22 +44,6 @@ static struct pwm_lookup crc_pwm_lookup[] = {
>  	PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_backlight", 0, PWM_POLARITY_NORMAL),
>  };
>  
> -static int intel_soc_pmic_find_gpio_irq(struct device *dev)
> -{
> -	struct gpio_desc *desc;
> -	int irq;
> -
> -	desc = devm_gpiod_get_index(dev, "intel_soc_pmic", 0, GPIOD_IN);
> -	if (IS_ERR(desc))
> -		return PTR_ERR(desc);
> -
> -	irq = gpiod_to_irq(desc);
> -	if (irq < 0)
> -		dev_warn(dev, "Can't get irq: %d\n", irq);
> -
> -	return irq;
> -}
> -
>  static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
>  				    const struct i2c_device_id *i2c_id)
>  {
> @@ -68,7 +52,6 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
>  	struct intel_soc_pmic_config *config;
>  	struct intel_soc_pmic *pmic;
>  	int ret;
> -	int irq;
>  
>  	id = acpi_match_device(dev->driver->acpi_match_table, dev);
>  	if (!id || !id->driver_data)
> @@ -83,14 +66,7 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
>  	dev_set_drvdata(dev, pmic);
>  
>  	pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config);
> -
> -	/*
> -	 * On some boards the PMIC interrupt may come from a GPIO line. Try to
> -	 * lookup the ACPI table for a such connection and setup a GPIO
> -	 * interrupt if it exists. Otherwise use the IRQ provided by I2C
> -	 */
> -	irq = intel_soc_pmic_find_gpio_irq(dev);
> -	pmic->irq = (irq < 0) ? i2c->irq : irq;
> +	pmic->irq = i2c->irq;
>  
>  	ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
>  				  config->irq_flags | IRQF_ONESHOT,

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog