[PATCH] rpmsg: Release rpmsg devices in backends

[Bjorn Andersson <bjorn.andersson@linaro.org>]

The rpmsg devices are allocated in the backends and as such must be
freed there as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/rpmsg/qcom_smd.c         | 11 +++++++++++
 drivers/rpmsg/virtio_rpmsg_bus.c |  9 +++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index beaef5dd973e..a0a39a8821a3 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -969,6 +969,14 @@ static const struct rpmsg_endpoint_ops qcom_smd_endpoint_ops = {
 	.poll = qcom_smd_poll,
 };
 
+static void qcom_smd_release_device(struct device *dev)
+{
+	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
+	struct qcom_smd_device *qsdev = to_smd_device(rpdev);
+
+	kfree(qsdev);
+}
+
 /*
  * Create a smd client device for channel that is being opened.
  */
@@ -998,6 +1006,7 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel)
 
 	rpdev->dev.of_node = qcom_smd_match_channel(edge->of_node, channel->name);
 	rpdev->dev.parent = &edge->dev;
+	rpdev->dev.release = qcom_smd_release_device;
 
 	return rpmsg_register_device(rpdev);
 }
@@ -1013,6 +1022,8 @@ static int qcom_smd_create_chrdev(struct qcom_smd_edge *edge)
 	qsdev->edge = edge;
 	qsdev->rpdev.ops = &qcom_smd_device_ops;
 	qsdev->rpdev.dev.parent = &edge->dev;
+	qsdev->rpdev.dev.release = qcom_smd_release_device;
+
 	return rpmsg_chrdev_register_device(&qsdev->rpdev);
 }
 
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 5e66e081027e..7f8c5cc1c118 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -360,6 +360,14 @@ static const struct rpmsg_device_ops virtio_rpmsg_ops = {
 	.announce_destroy = virtio_rpmsg_announce_destroy,
 };
 
+static void virtio_rpmsg_release_device(struct device *dev)
+{
+	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
+	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
+
+	kfree(vch);
+}
+
 /*
  * create an rpmsg channel using its name and address info.
  * this function will be used to create both static and dynamic
@@ -408,6 +416,7 @@ static struct rpmsg_device *rpmsg_create_channel(struct virtproc_info *vrp,
 	strncpy(rpdev->id.name, chinfo->name, RPMSG_NAME_SIZE);
 
 	rpdev->dev.parent = &vrp->vdev->dev;
+	rpdev->dev.release = virtio_rpmsg_release_device;
 	ret = rpmsg_register_device(rpdev);
 	if (ret)
 		return NULL;
-- 
2.12.0