From: Ralph Sennhauser <ralph.sennhauser@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Ralph Sennhauser <ralph.sennhauser@gmail.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@free-electrons.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: dts: armada-38x: label USB and SATA nodes
Date: Fri, 31 Mar 2017 09:41:15 +0200 [thread overview]
Message-ID: <20170331074115.8111-1-ralph.sennhauser@gmail.com> (raw)
Recently most nodes got labels to make them referenceable. The USB 3.0
nodes as well as the nodes for the SATA controllers were left out,
rectify the omission.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
---
Hi everybody
In preparation to add support for the Linksys WRT3200ACM (Rango) some
rework of the "dts-stack" is highly desirable. This patch is part of the
preparatory work but independent.
The label for the USB 2.0 port is "usb0:", so using "usb1:" and "usb2:"
would be the logical continuation. Guess you realized the catch already,
"usb2:" for an USB 3.0 controller might be very confusing.
I'm sending this patch ahead of the rest so the labels can be discussed
and finalized.
Ralph
---
arch/arm/boot/dts/armada-38x.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index ba27ec1..78c838a 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -530,7 +530,7 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
- sata@a8000 {
+ satac0: sata@a8000 {
compatible = "marvell,armada-380-ahci";
reg = <0xa8000 0x2000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -546,7 +546,7 @@
status = "disabled";
};
- sata@e0000 {
+ satac1: sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -590,7 +590,7 @@
status = "disabled";
};
- usb3@f0000 {
+ usb3_0: usb3@f0000 {
compatible = "marvell,armada-380-xhci";
reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -598,7 +598,7 @@
status = "disabled";
};
- usb3@f8000 {
+ usb3_1: usb3@f8000 {
compatible = "marvell,armada-380-xhci";
reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
--
2.10.2
next reply other threads:[~2017-03-31 7:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-31 7:41 Ralph Sennhauser [this message]
2017-03-31 16:50 ` Andrew Lunn
2017-03-31 17:39 ` Ralph Sennhauser
2017-03-31 18:21 ` Andrew Lunn
2017-04-01 8:09 ` Ralph Sennhauser
2017-04-05 15:49 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170331074115.8111-1-ralph.sennhauser@gmail.com \
--to=ralph.sennhauser@gmail.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome