From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: clemens@ladisch.de, arnd@arndb.de, gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org, Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH v2 3/6] hpet: fix checkpatch complains about spaces
Date: Mon, 3 Apr 2017 14:15:56 +0200 [thread overview]
Message-ID: <20170403121559.1397-4-clabbe.montjoie@gmail.com> (raw)
In-Reply-To: <20170403121559.1397-1-clabbe.montjoie@gmail.com>
This patch make checkpatch happy for spaces.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
drivers/char/hpet.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 206d3a6..7a35739 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -51,7 +51,6 @@
#define HPET_RANGE_SIZE 1024 /* from HPET spec */
-
/* WARNING -- don't get confused. These macros are never used
* to write the (single) counter, and rarely to read it.
* They're badly named; to fix, someday.
@@ -83,6 +82,7 @@ static struct clocksource clocksource_hpet = {
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+
static struct clocksource *hpet_clocksource;
#endif
@@ -281,7 +281,7 @@ static int hpet_open(struct inode *inode, struct file *file)
}
static ssize_t
-hpet_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
+hpet_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
DECLARE_WAITQUEUE(wait, current);
unsigned long data;
@@ -327,7 +327,7 @@ hpet_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
return retval;
}
-static unsigned int hpet_poll(struct file *file, poll_table * wait)
+static unsigned int hpet_poll(struct file *file, poll_table *wait)
{
unsigned long v;
struct hpet_dev *devp;
@@ -687,6 +687,7 @@ hpet_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
if ((cmd == HPET_INFO) && !err) {
struct compat_hpet_info __user *u = compat_ptr(arg);
+
if (put_user(info.hi_ireqfreq, &u->hi_ireqfreq) ||
put_user(info.hi_flags, &u->hi_flags) ||
put_user(info.hi_hpet, &u->hi_hpet) ||
@@ -902,7 +903,7 @@ int hpet_alloc(struct hpet_data *hdp)
"hpet%u: %u comparators, %d-bit %u.%06u MHz counter\n",
hpetp->hp_which, hpetp->hp_ntimer,
cap & HPET_COUNTER_SIZE_MASK ? 64 : 32,
- (unsigned) temp, remainder);
+ (unsigned)temp, remainder);
mcfg = readq(&hpet->hpet_config);
if ((mcfg & HPET_ENABLE_CNF_MASK) == 0) {
--
2.10.2
next prev parent reply other threads:[~2017-04-03 12:19 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-03 12:15 [PATCH v2 0/6] hpet: fix build warnings and style Corentin Labbe
2017-04-03 12:15 ` [PATCH v2 1/6] hpet: remove unused variable hpet in hpet_ioctl_common Corentin Labbe
2017-04-03 12:15 ` [PATCH v2 2/6] hpet: remove unused writeq/readq function definitions Corentin Labbe
2017-04-03 12:15 ` Corentin Labbe [this message]
2017-04-03 12:15 ` [PATCH v2 4/6] hpet: replace printk by their pr_xxx counterparts Corentin Labbe
2017-04-03 19:44 ` Joe Perches
2017-04-03 12:15 ` [PATCH v2 5/6] hpet: removing unused variable m in hpet_interrupt Corentin Labbe
2017-04-03 12:55 ` Clemens Ladisch
2017-04-03 12:15 ` [PATCH v2 6/6] hpet: fix style issue about braces and alignment Corentin Labbe
2017-04-04 3:43 ` Joe Perches
-- strict thread matches above, loose matches on Subject: below --
2017-03-30 2:53 [PATCH 0/2] Support new Alps HID I2C Touchpad device Masaki Ota
2017-03-30 2:53 ` [PATCH 1/2] Alps HID I2C T4 device support Masaki Ota
2017-04-04 3:08 ` Nikolaus Rath
2017-04-04 6:55 ` Masaki Ota
2017-04-04 17:08 ` Nikolaus Rath
2017-04-04 23:40 ` Masaki Ota
2017-04-04 23:42 ` Nikolaus Rath
2017-04-04 23:49 ` Masaki Ota
2017-04-05 0:01 ` Nikolaus Rath
2017-04-05 8:43 ` Masaki Ota
2017-04-05 18:35 ` Nikolaus Rath
2017-04-06 1:07 ` Masaki Ota
2017-04-06 22:59 ` Nikolaus Rath
2017-04-24 14:54 ` Benjamin Tissoires
2017-03-30 2:53 ` [PATCH 2/2] Add new U1 device ID Masaki Ota
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170403121559.1397-4-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=arnd@arndb.de \
--cc=clemens@ladisch.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®