From: Hans de Goede <hdegoede@redhat.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Cc: linux-kernel@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>
Subject: [PATCH v2 2/2] extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exit
Date: Wed, 5 Apr 2017 00:04:52 +0200 [thread overview]
Message-ID: <20170404220452.9891-2-hdegoede@redhat.com> (raw)
In-Reply-To: <20170404220452.9891-1-hdegoede@redhat.com>
When we leave host-mode because the id-pin is no longer connected to
ground, the 5v boost converter is normally still on, so we will see
Vbus, but it is not from a charger (normally) so the charger-type
detection will fail.
This commit silences the cht_wc_extcon_get_charger() false-positive
errors when we're leaving host mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/extcon/extcon-intel-cht-wc.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index e22df5f..5f37112 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -96,6 +96,7 @@ struct cht_wc_extcon_data {
struct regmap *regmap;
struct extcon_dev *edev;
unsigned int previous_cable;
+ bool usb_host;
};
static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
@@ -112,7 +113,8 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
return USB_ID_FLOAT;
}
-static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext)
+static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
+ bool ignore_errors)
{
int ret, usbsrc, status;
unsigned long timeout;
@@ -135,6 +137,9 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext)
} while (time_before(jiffies, timeout));
if (status != CHT_WC_USBSRC_STS_SUCCESS) {
+ if (ignore_errors)
+ return EXTCON_CHG_USB_SDP; /* Save fallback */
+
if (status == CHT_WC_USBSRC_STS_FAIL)
dev_warn(ext->dev, "Could not detect charger type\n");
else
@@ -203,6 +208,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
{
int ret, pwrsrc_sts, id;
unsigned int cable = EXTCON_NONE;
+ /* Ignore errors in host mode, as the 5v boost converter is on then */
+ bool ignore_get_charger_errors = ext->usb_host;
ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
if (ret) {
@@ -223,7 +230,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
goto set_state;
}
- ret = cht_wc_extcon_get_charger(ext);
+ ret = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors);
if (ret >= 0)
cable = ret;
@@ -238,8 +245,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
ext->previous_cable = cable;
}
- extcon_set_state_sync(ext->edev, EXTCON_USB_HOST,
- id == USB_ID_GND || id == USB_RID_A);
+ ext->usb_host = id == USB_ID_GND || id == USB_RID_A;
+ extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
}
static irqreturn_t cht_wc_extcon_isr(int irq, void *data)
--
2.9.3
next prev parent reply other threads:[~2017-04-04 22:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170404220527epcas3p48055a502a376adde1837f79530fc2bb7@epcas3p4.samsung.com>
2017-04-04 22:04 ` [PATCH v2 1/2] extcon: intel-cht-wc: Disable external 5v boost converter on probe Hans de Goede
2017-04-04 22:04 ` Hans de Goede [this message]
2017-04-05 1:08 ` [PATCH v2 2/2] extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exit Chanwoo Choi
2017-04-05 1:08 ` [PATCH v2 1/2] extcon: intel-cht-wc: Disable external 5v boost converter on probe Chanwoo Choi
2017-04-05 9:38 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170404220452.9891-2-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=cw00.choi@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®