From: Quentin Schulz <quentin.schulz@free-electrons.com>
To: dmitry.torokhov@gmail.com, robh+dt@kernel.org,
mark.rutland@arm.com, maxime.ripard@free-electrons.com,
wens@csie.org, lee.jones@linaro.org, linux@armlinux.org.uk,
jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net
Cc: Quentin Schulz <quentin.schulz@free-electrons.com>,
thomas.petazzoni@free-electrons.com, linux-input@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
linux-sunxi@googlegroups.com, icenowy@aosc.xyz
Subject: [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function
Date: Wed, 5 Apr 2017 11:06:29 +0200 [thread overview]
Message-ID: <20170405090634.4649-4-quentin.schulz@free-electrons.com> (raw)
In-Reply-To: <20170405090634.4649-1-quentin.schulz@free-electrons.com>
This moves code used in MFD probing to a new sun4i_gpadc_probe_mfd
function.
This driver was initially written for A10, A13 and A31 SoCs which
already had a DT binding for this IP, thus we needed to use an MFD to
probe the different drivers without changing the DT binding of these
SoCs.
For SoCs that will require to create a DT binding for this IP, we can
avoid using an MFD, thus we need two separate functions: one for probing
via MFD and one for probing without MFD.
This split the code specific to MFD probing in a function separated from
the driver probe function.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
---
v3:
- updated commit log,
added in v2
drivers/iio/adc/sun4i-gpadc-iio.c | 78 ++++++++++++++++++++++-----------------
1 file changed, 45 insertions(+), 33 deletions(-)
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index a8e134f..7cb997a 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -454,31 +454,16 @@ static int sun4i_irq_init(struct platform_device *pdev, const char *name,
return 0;
}
-static int sun4i_gpadc_probe(struct platform_device *pdev)
+static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
+ struct iio_dev *indio_dev)
{
- struct sun4i_gpadc_iio *info;
- struct iio_dev *indio_dev;
+ struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+ struct sun4i_gpadc_dev *sun4i_gpadc_dev =
+ dev_get_drvdata(pdev->dev.parent);
int ret;
- struct sun4i_gpadc_dev *sun4i_gpadc_dev;
-
- sun4i_gpadc_dev = dev_get_drvdata(pdev->dev.parent);
-
- indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
- if (!indio_dev)
- return -ENOMEM;
- info = iio_priv(indio_dev);
- platform_set_drvdata(pdev, indio_dev);
-
- mutex_init(&info->mutex);
info->regmap = sun4i_gpadc_dev->regmap;
- info->indio_dev = indio_dev;
- init_completion(&info->completion);
- indio_dev->name = dev_name(&pdev->dev);
- indio_dev->dev.parent = &pdev->dev;
- indio_dev->dev.of_node = pdev->dev.of_node;
- indio_dev->info = &sun4i_gpadc_iio_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
+
indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
indio_dev->channels = sun4i_gpadc_channels;
@@ -519,8 +504,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"could not register thermal sensor: %ld\n",
PTR_ERR(tzd));
- ret = PTR_ERR(tzd);
- goto err;
+ return PTR_ERR(tzd);
}
} else {
indio_dev->num_channels =
@@ -528,36 +512,65 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
indio_dev->channels = sun4i_gpadc_channels_no_temp;
}
- pm_runtime_set_autosuspend_delay(&pdev->dev,
- SUN4I_GPADC_AUTOSUSPEND_DELAY);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_suspended(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
-
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
sun4i_gpadc_temp_data_irq_handler,
"temp_data", &info->temp_data_irq,
&info->ignore_temp_data_irq);
if (ret < 0)
- goto err;
+ return ret;
}
ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
&info->fifo_data_irq, &info->ignore_fifo_data_irq);
if (ret < 0)
- goto err;
+ return ret;
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
if (ret < 0) {
dev_err(&pdev->dev,
"failed to register iio map array\n");
- goto err;
+ return ret;
}
}
+ return 0;
+}
+
+static int sun4i_gpadc_probe(struct platform_device *pdev)
+{
+ struct sun4i_gpadc_iio *info;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ info = iio_priv(indio_dev);
+ platform_set_drvdata(pdev, indio_dev);
+
+ mutex_init(&info->mutex);
+ info->indio_dev = indio_dev;
+ init_completion(&info->completion);
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->info = &sun4i_gpadc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ SUN4I_GPADC_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
ret = devm_iio_device_register(&pdev->dev, indio_dev);
if (ret < 0) {
dev_err(&pdev->dev, "could not register the device\n");
@@ -570,7 +583,6 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
if (IS_ENABLED(CONFIG_THERMAL_OF))
iio_map_array_unregister(indio_dev);
-err:
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
--
2.9.3
next prev parent reply other threads:[~2017-04-05 9:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-05 9:06 [PATCH v4 0/8] add thermal throttling to Allwinner A33 SoC Quentin Schulz
2017-04-05 9:06 ` [PATCH v4 1/8] dt-bindings: mfd: add A33 GPADC binding Quentin Schulz
2017-04-05 12:11 ` Lee Jones
2017-04-05 9:06 ` [PATCH v4 2/8] dt-bindings: input: touschcreen: remove sun4i documentation Quentin Schulz
2017-04-05 12:11 ` Lee Jones
2017-04-05 9:06 ` Quentin Schulz [this message]
2017-04-08 17:26 ` [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function Jonathan Cameron
2017-04-05 9:06 ` [PATCH v4 4/8] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor Quentin Schulz
2017-04-08 16:36 ` Jonathan Cameron
2017-04-05 9:06 ` [PATCH v4 5/8] ARM: sun8i: a33: add " Quentin Schulz
2017-04-05 12:12 ` Maxime Ripard
2017-04-05 9:06 ` [PATCH v4 6/8] ARM: sun8i: a33: add CPU thermal throttling Quentin Schulz
2017-04-05 12:13 ` Maxime Ripard
2017-04-05 9:06 ` [PATCH v4 7/8] ARM: sun8i: a33: Add devfreq-based GPU cooling Quentin Schulz
2017-04-05 12:16 ` Maxime Ripard
2017-04-05 9:06 ` [PATCH v4 8/8] ARM: sun8i: sina33: add highest OPP of CPUs Quentin Schulz
2017-04-05 12:17 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170405090634.4649-4-quentin.schulz@free-electrons.com \
--to=quentin.schulz@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=icenowy@aosc.xyz \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@free-electrons.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®