mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tobias Klauser <tklauser@distanz.ch>
To: Alan Tull <atull@kernel.org>
Cc: Moritz Fischer <moritz.fischer@ettus.com>,
	linux-fpga@vger.kernel.org,
	linux-kernel <linux-kernel@vger.kernel.org>,
	matthew.gerlach@linux.intel.com
Subject: Re: [PATCH] fpga: allow to compile-test Altera FPGA bridge drivers
Date: Wed, 12 Apr 2017 08:51:04 +0200	[thread overview]
Message-ID: <20170412065104.GE31754@distanz.ch> (raw)
In-Reply-To: <CANk1AXTdwsgx0tpt4cp2xKuW15+zMOmUyOZZuuO0EzEGAt01qA@mail.gmail.com>

On 2017-04-11 at 17:21:19 +0200, Alan Tull <atull@kernel.org> wrote:
> On Tue, Apr 11, 2017 at 9:35 AM, Tobias Klauser <tklauser@distanz.ch> wrote:
> > Hi Alan,
> >
> > On 2017-04-11 at 16:27:03 +0200, Alan Tull <atull@kernel.org> wrote:
> >> On Tue, Apr 11, 2017 at 4:22 AM, Tobias Klauser <tklauser@distanz.ch> wrote:
> >>
> >> Hi Tobias,
> >>
> >> Thanks for your fixes that you have been sending.  I disagree with
> >> this particular one (see below), but I appreciate your efforts.
> >
> > Thanks for your feedback on the patch.
> >
> >> > Add COMPILE_TEST to the Kconfig entries for the Altera SoCFPGA FPGA
> >> > Bridge and the Altera FPGA Freeze Bridge drivers to allow test-compiling
> >> > them on other architectures.
> >> >
> >> > Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
> >> > ---
> >> >  drivers/fpga/Kconfig | 4 ++--
> >> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >> >
> >> > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> >> > index 161ba9dccede..38ab05d261bf 100644
> >> > --- a/drivers/fpga/Kconfig
> >> > +++ b/drivers/fpga/Kconfig
> >> > @@ -69,14 +69,14 @@ config FPGA_BRIDGE
> >> >
> >> >  config SOCFPGA_FPGA_BRIDGE
> >> >         tristate "Altera SoCFPGA FPGA Bridges"
> >> > -       depends on ARCH_SOCFPGA && FPGA_BRIDGE
> >> > +       depends on (ARCH_SOCFPGA || COMPILE_TEST) && FPGA_BRIDGE
> >>
> >> It doesn't make sense to compile test these on other arch's.
> >> The bridges enabled by this only appear on Cyclone 5 SoCFPGA parts.
> >
> > There are many drivers in the tree where this is the case (i.e. the
> > driver is compiled on an arch where the corresponding hardware is not
> > available). Still it could be benefitial IMO in order to catch compiler
> > errors and warnings, e.g. due to API/header changes earlier on. I
> > occasionally found this quite handy for janitorial/cleanup patches where
> > I didn't have the corresponding cross-compiler/hardware.
> 
> That sounds good and useful.
> 
> >
> > In any case, I don't feel strongly about this. So feel free to drop at
> > your discretion.
> >
> >> >         help
> >> >           Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
> >> >           devices.
> >> >
> >> >  config ALTERA_FREEZE_BRIDGE
> >> >         tristate "Altera FPGA Freeze Bridge"
> >> > -       depends on ARCH_SOCFPGA && FPGA_BRIDGE
> >> > +       depends on (ARCH_SOCFPGA || COMPILE_TEST) && FPGA_BRIDGE
> >>
> >> These bridges can be used on Altera PCIe FPGA's.  So this shouldn't
> >> have been dependent on ARCH_SOCFPGA in the first place.
> >
> > Ok. So the dependency on ARCH_SOCFPGA should be dropped altogether? I
> > can send an updated patch if you want.
> 
> Yes please.

Thanks, I'll send a v2.

  reply	other threads:[~2017-04-12  6:51 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-11  9:22 Tobias Klauser
2017-04-11 14:27 ` Alan Tull
2017-04-11 14:35   ` Tobias Klauser
2017-04-11 15:21     ` Alan Tull
2017-04-12  6:51       ` Tobias Klauser [this message]
2017-04-12  5:47 ` kbuild test robot
2017-04-18 15:27   ` matthew.gerlach
2017-04-19 12:07     ` Tobias Klauser

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170412065104.GE31754@distanz.ch \
    --to=tklauser@distanz.ch \
    --cc=atull@kernel.org \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matthew.gerlach@linux.intel.com \
    --cc=moritz.fischer@ettus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®