mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
	maxime.ripard@free-electrons.com, wens@csie.org,
	linux@armlinux.org.uk, catalin.marinas@arm.com,
	will.deacon@arm.com, peppe.cavallaro@st.com,
	alexandre.torgue@st.com
Cc: linux-sunxi@googlegroups.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH v4 00/18] net-next: stmmac: add dwmac-sun8i ethernet driver
Date: Wed, 12 Apr 2017 13:13:42 +0200	[thread overview]
Message-ID: <20170412111400.2296-1-clabbe.montjoie@gmail.com> (raw)

Hello

This patch series add the driver for dwmac-sun8i which handle the Ethernet MAC
present on Allwinner H3/H5/A83T/A64 SoCs.

This driver is the continuation of the sun8i-emac driver.
During the development, it appeared that in fact the hardware was a modified
version of some dwmac.
So the driver is now written as a glue driver for stmmac.

It supports 10/100/1000 Mbit/s speed with half/full duplex.
It can use an internal PHY (MII 10/100) or an external PHY
via RGMII/RMII.

This patch series enable the driver only for the H3/A64/H5 SoC since A83T
doesn't have the necessary clocks present in mainline.

The driver have been tested on the following boards:
- H3 Orange PI PC, BananaPI-M2+
- A64 Pine64, BananaPi-M64
- A83T BananaPI-M3

The first two patchs are some mandatory changes for letting dwmac-sun8i be used.
The following three patchs add the driver and its documentation.
The remaining are DT patch enabling it.

Regards
Corentin Labbe

Changes since v3:
- Renamed tx-delay/rx-delay to tx-delay-ps/rx-delay-ps
- fix syscon compatible example
- Changed parameter type for setup() function
- Dropped some DT patchs for boards which I could not test further

Changes since v2:
- corrected order of syscon compatible
- added compatible = "ethernet-phy-ieee802.3-c22 to PHY
- added set_mac function

Changes since v1:
- added TX/RX delay units
- splitted syscon documentation in its own patch
- regulator is now disabled after clk_prepare_enable(gmac->tx_clk) error
- Fixed a memory leak on mac_device_info
- Use now generic pin config for all DT stuff
- CONFIG_DWMAC_SUN8I is now set to y in defconfigs

Corentin Labbe (18):
  net: stmmac: export stmmac_set_mac_addr/stmmac_get_mac_addr
  net: stmmac: add optional setup function
  dt-bindings: net: Add DT bindings documentation for Allwinner
    dwmac-sun8i
  dt-bindings: syscon: Add DT bindings documentation for Allwinner
    syscon
  net: stmmac: Add dwmac-sun8i
  arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
  arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
  arm: sun8i: orangepi-pc: Enable dwmac-sun8i
  arm: sun8i: orangepi-2: Enable dwmac-sun8i
  arm: sun8i: orangepi-one: Enable dwmac-sun8i
  arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high
  arm64: allwinner: sun50i-a64: Add dt node for the syscon control
    module
  arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
  arm: allwinner: pine64: Enable dwmac-sun8i
  arm: allwinner: pine64-plus: Enable dwmac-sun8i
  arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
  arm: sunxi: Enable dwmac-sun8i driver on sunxi_defconfig
  arm: multi_v7: Enable dwmac-sun8i driver on multi_v7_defconfig

 .../devicetree/bindings/misc/allwinner,syscon.txt  |  19 +
 .../devicetree/bindings/net/dwmac-sun8i.txt        |  77 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          |   8 +
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        |   8 +
 arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts    |   5 +
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         |   8 +
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                 |  40 +
 arch/arm/configs/multi_v7_defconfig                |   1 +
 arch/arm/configs/sunxi_defconfig                   |   1 +
 .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts |  15 +
 .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts  |  17 +-
 .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts |  16 +
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi      |  43 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  11 +
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  | 960 +++++++++++++++++++++
 drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c    |   3 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  29 +-
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   9 +-
 include/linux/stmmac.h                             |   2 +
 20 files changed, 1268 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/misc/allwinner,syscon.txt
 create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c

-- 
2.10.2

             reply	other threads:[~2017-04-12 11:16 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-12 11:13 Corentin Labbe [this message]
2017-04-12 11:13 ` [PATCH v4 01/18] net: stmmac: export stmmac_set_mac_addr/stmmac_get_mac_addr Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 02/18] net: stmmac: add optional setup function Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 03/18] dt-bindings: net: Add DT bindings documentation for Allwinner dwmac-sun8i Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 04/18] dt-bindings: syscon: Add DT bindings documentation for Allwinner syscon Corentin Labbe
2017-04-19 21:06   ` Rob Herring
2017-04-19 23:38   ` André Przywara
2017-04-20  6:50     ` Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 05/18] net-next: stmmac: Add dwmac-sun8i Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 06/18] arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 07/18] arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 08/18] arm: sun8i: orangepi-pc: Enable dwmac-sun8i Corentin Labbe
2017-04-12 12:39   ` Maxime Ripard
2017-04-12 11:13 ` [PATCH v4 09/18] arm: sun8i: orangepi-2: " Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 10/18] arm: sun8i: orangepi-one: " Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 11/18] arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 12/18] arm64: allwinner: sun50i-a64: Add dt node for the syscon control module Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 13/18] arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver Corentin Labbe
2017-04-12 12:41   ` Maxime Ripard
2017-04-24 12:24     ` Corentin Labbe
2017-04-24 12:58       ` Chen-Yu Tsai
2017-04-12 11:13 ` [PATCH v4 14/18] arm: allwinner: pine64: Enable dwmac-sun8i Corentin Labbe
2017-04-12 12:42   ` Maxime Ripard
2017-04-12 11:13 ` [PATCH v4 15/18] arm: allwinner: pine64-plus: " Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 16/18] arm64: allwinner: bananapi-m64: " Corentin Labbe
2017-04-12 11:13 ` [PATCH v4 17/18] arm: sunxi: Enable dwmac-sun8i driver on sunxi_defconfig Corentin Labbe
2017-04-12 11:14 ` [PATCH v4 18/18] arm: multi_v7: Enable dwmac-sun8i driver on multi_v7_defconfig Corentin Labbe
2017-04-12 12:42   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170412111400.2296-1-clabbe.montjoie@gmail.com \
    --to=clabbe.montjoie@gmail.com \
    --cc=alexandre.torgue@st.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®