mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Matias Bjørling" <matias@cnexlabs.com>
To: <axboe@fb.com>
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Dan Carpenter" <dan.carpenter@oracle.com>,
	"Matias Bjørling" <matias@cnexlabs.com>
Subject: [GIT PULL 19/19] lightnvm: fix some error code in pblk-init.c
Date: Sat, 15 Apr 2017 20:55:53 +0200	[thread overview]
Message-ID: <20170415185553.16098-20-matias@cnexlabs.com> (raw)
In-Reply-To: <20170415185553.16098-1-matias@cnexlabs.com>

From: Dan Carpenter <dan.carpenter@oracle.com>

There were a bunch of places in pblk_lines_init() where we didn't set an
error code.  And in pblk_writer_init() we accidentally return 1 instead
of a correct error code, which would result in a Oops later.

Fixes: 11a5d6fdf919 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
---
 drivers/lightnvm/pblk-init.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/lightnvm/pblk-init.c b/drivers/lightnvm/pblk-init.c
index 94653b1..3996e4b 100644
--- a/drivers/lightnvm/pblk-init.c
+++ b/drivers/lightnvm/pblk-init.c
@@ -543,7 +543,7 @@ static int pblk_lines_init(struct pblk *pblk)
 	long nr_bad_blks, nr_meta_blks, nr_free_blks;
 	int bb_distance;
 	int i;
-	int ret = 0;
+	int ret;
 
 	lm->sec_per_line = geo->sec_per_blk * geo->nr_luns;
 	lm->blk_per_line = geo->nr_luns;
@@ -638,12 +638,16 @@ static int pblk_lines_init(struct pblk *pblk)
 	}
 
 	l_mg->bb_template = kzalloc(lm->sec_bitmap_len, GFP_KERNEL);
-	if (!l_mg->bb_template)
+	if (!l_mg->bb_template) {
+		ret = -ENOMEM;
 		goto fail_free_meta;
+	}
 
 	l_mg->bb_aux = kzalloc(lm->sec_bitmap_len, GFP_KERNEL);
-	if (!l_mg->bb_aux)
+	if (!l_mg->bb_aux) {
+		ret = -ENOMEM;
 		goto fail_free_bb_template;
+	}
 
 	bb_distance = (geo->nr_luns) * geo->sec_per_pl;
 	for (i = 0; i < lm->sec_per_line; i += bb_distance)
@@ -667,8 +671,10 @@ static int pblk_lines_init(struct pblk *pblk)
 
 	pblk->lines = kcalloc(l_mg->nr_lines, sizeof(struct pblk_line),
 								GFP_KERNEL);
-	if (!pblk->lines)
+	if (!pblk->lines) {
+		ret = -ENOMEM;
 		goto fail_free_bb_aux;
+	}
 
 	nr_free_blks = 0;
 	for (i = 0; i < l_mg->nr_lines; i++) {
@@ -682,8 +688,10 @@ static int pblk_lines_init(struct pblk *pblk)
 		spin_lock_init(&line->lock);
 
 		nr_bad_blks = pblk_bb_line(pblk, line);
-		if (nr_bad_blks < 0 || nr_bad_blks > lm->blk_per_line)
+		if (nr_bad_blks < 0 || nr_bad_blks > lm->blk_per_line) {
+			ret = -EINVAL;
 			goto fail_free_lines;
+		}
 
 		line->blk_in_line = lm->blk_per_line - nr_bad_blks;
 		if (line->blk_in_line < lm->min_blk_line) {
@@ -733,7 +741,7 @@ static int pblk_writer_init(struct pblk *pblk)
 	pblk->writer_ts = kthread_create(pblk_write_ts, pblk, "pblk-writer-t");
 	if (IS_ERR(pblk->writer_ts)) {
 		pr_err("pblk: could not allocate writer kthread\n");
-		return 1;
+		return PTR_ERR(pblk->writer_ts);
 	}
 
 	return 0;
-- 
2.9.3

  parent reply	other threads:[~2017-04-15 18:57 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-15 18:55 [GIT PULL 00/19] LightNVM patches for 4.12 Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 01/19] lightnvm: Fix error handling Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 02/19] nvme/lightnvm: Prevent small buffer overflow in nvme_nvm_identify Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 03/19] lightnvm: submit erases using the I/O path Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 04/19] lightnvm: rename scrambler controller hint Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 05/19] lightnvm: free reverse device map Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 06/19] lightnvm: enable nvme size compile asserts Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 07/19] lightnvm: don't check for failure from mempool_alloc() Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 08/19] lightnvm: double-clear of dev->lun_map on target init error Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 09/19] lightnvm: fix cleanup order of disk on " Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 10/19] lightnvm: bad type conversion for nvme control bits Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 11/19] lightnvm: allow to init targets on factory mode Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 12/19] lightnvm: make nvm_free static Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 13/19] lightnvm: clean unused variable Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 14/19] lightnvm: fix type checks on rrpc Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 15/19] lightnvm: convert sprintf into strlcpy Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 16/19] lightnvm: physical block device (pblk) target Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 17/19] lightnvm: pblk-gc: fix an error pointer dereference in init Matias Bjørling
2017-04-15 18:55 ` [GIT PULL 18/19] lightnvm: fix some WARN() messages Matias Bjørling
2017-04-15 18:55 ` Matias Bjørling [this message]
2017-04-16 20:37 ` [GIT PULL 00/19] LightNVM patches for 4.12 Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170415185553.16098-20-matias@cnexlabs.com \
    --to=matias@cnexlabs.com \
    --cc=axboe@fb.com \
    --cc=dan.carpenter@oracle.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®