Re: [PATCH] Input: elan_i2c - check if device is there before really probing

[Guenter Roeck <linux@roeck-us.net>]

On Mon, May 08, 2017 at 02:10:31PM -0700, Dmitry Torokhov wrote:
> On Wed, May 03, 2017 at 11:42:54PM -0700, Guenter Roeck wrote:
> > On 05/03/2017 11:29 PM, Dmitry Torokhov wrote:
> > >Before trying to properly initialize the touchpad and generate bunch of
> > >errors, let's first see it there is anything at the given address. If we
> > >get error, fail silently with -ENXIO.
> > >
> > >Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > >---
> > > drivers/input/mouse/elan_i2c_core.c | 9 +++++++++
> > > 1 file changed, 9 insertions(+)
> > >
> > >diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
> > >index 5d3b53dd2fa2..0479730e7c5c 100644
> > >--- a/drivers/input/mouse/elan_i2c_core.c
> > >+++ b/drivers/input/mouse/elan_i2c_core.c
> > >@@ -1040,6 +1040,7 @@ static int elan_probe(struct i2c_client *client,
> > > 	const struct elan_transport_ops *transport_ops;
> > > 	struct device *dev = &client->dev;
> > > 	struct elan_tp_data *data;
> > >+	union i2c_smbus_data dummy;
> > > 	unsigned long irqflags;
> > > 	int error;
> > >
> > >@@ -1091,6 +1092,14 @@ static int elan_probe(struct i2c_client *client,
> > > 		return error;
> > > 	}
> > >
> > >+	/* Make sure there is something at this address */
> > >+	error = i2c_smbus_xfer(client->adapter, client->addr, 0,
> > >+			       I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy);
> > 
> > Can't you just call i2c_smbus_read_byte_data(client, 0); and check if it returns
> > an error ?
> 
> Are we guaranteed to get a result from command "0"? I am not sure, and
> looking at least at i2c_smbus_xfer_emulated() I2C_SMBUS_READ with
> I2C_SMBUS_BYTE modifier works differently form
> I2C_SMBUS_READ/I2C_SMBUS_BYTE_DATA (the former uses a single i2c message
> vs 2 for the latter).
> 
> Also the form above is what i2c core uses to do detection when adapter
> does not implement I2C_SMBUS_QUICK, so I'd rather leave it as it was.
> 

How about i2c_smbus_read_byte() ?

	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
	                        I2C_SMBUS_READ, 0,
				I2C_SMBUS_BYTE, &data);
	return (status < 0) ? status : data.byte;

Guenter