mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <b-liu@ti.com>, <tony@atomide.com>, <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<balbi@kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
Date: Fri, 12 May 2017 16:48:48 +0300	[thread overview]
Message-ID: <20170512134848.468-1-peter.ujfalusi@ti.com> (raw)

We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
---
Bin,

I have separated the patch from the tusb DMAengine conversion series and that
will depend on this patch.

Regards,
Peter

 drivers/usb/musb/tusb6010_omap.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 8b43c4b99f04..7870b37e0ea5 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -219,6 +219,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 	u32				dma_remaining;
 	int				src_burst, dst_burst;
 	u16				csr;
+	u32				psize;
 	int				ch;
 	s8				dmareq;
 	s8				sync_dev;
@@ -390,15 +391,19 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 
 	if (chdat->tx) {
 		/* Send transfer_packet_sz packets at a time */
-		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-			chdat->transfer_packet_sz);
+		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~0x7ff;
+		psize |= chdat->transfer_packet_sz;
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
 		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
 			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
 	} else {
 		/* Receive transfer_packet_sz packets at a time */
-		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-			chdat->transfer_packet_sz << 16);
+		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~(0x7ff << 16);
+		psize |= (chdat->transfer_packet_sz << 16);
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
 		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
 			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
-- 
2.13.0

             reply	other threads:[~2017-05-12 13:49 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-12 13:48 Peter Ujfalusi [this message]
2017-05-12 18:58 ` Bin Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170512134848.468-1-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=b-liu@ti.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®