From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755461AbdEMOeB (ORCPT ); Sat, 13 May 2017 10:34:01 -0400 Received: from mx2.suse.de ([195.135.220.15]:37242 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755233AbdEMOd7 (ORCPT ); Sat, 13 May 2017 10:33:59 -0400 From: =?UTF-8?q?Andreas=20F=C3=A4rber?= To: linux-amlogic@lists.infradead.org Cc: Carlo Caione , Kevin Hilman , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?UTF-8?q?Andreas=20F=C3=A4rber?= , Rob Herring , Mark Rutland , Catalin Marinas , Will Deacon , devicetree@vger.kernel.org Subject: [PATCH v2 17/18] arm64: dts: meson-gxm-nexbox-a1: Fix node order Date: Sat, 13 May 2017 16:33:36 +0200 Message-Id: <20170513143337.14278-18-afaerber@suse.de> X-Mailer: git-send-email 2.12.0 In-Reply-To: <20170513143337.14278-1-afaerber@suse.de> References: <20170513143337.14278-1-afaerber@suse.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Sort nodes referenced by label alphabetically. Signed-off-by: Andreas Färber --- v1 -> v2: * Rebased (new nodes added) .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 86 +++++++++++----------- 1 file changed, 43 insertions(+), 43 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 920fac10de93..5f626d683088 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -113,10 +113,49 @@ }; }; -&uart_AO { +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; + + pinctrl-0 = <ð_pins>; pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <2>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <1000>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; }; &ir { @@ -163,47 +202,8 @@ vqmmc-supply = <&vddio_boot>; }; -ðmac { - status = "okay"; - - pinctrl-0 = <ð_pins>; - pinctrl-names = "default"; - - /* Select external PHY by default */ - phy-handle = <&external_phy>; - - amlogic,tx-delay-ns = <2>; - - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - - /* External PHY is in RGMII */ - phy-mode = "rgmii"; -}; - -&external_mdio { - external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; - reg = <0>; - max-speed = <1000>; - }; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&hdmi_tx { +&uart_AO { status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; -- 2.12.0