mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <bskeggs@redhat.com>, <airlied@linux.ie>
Cc: <dri-devel@lists.freedesktop.org>,
	<nouveau@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>,
	Lyude Paul <lyude@redhat.com>, Dave Airlie <airlied@redhat.com>,
	Gleb Nemshilov <gleb@fastmail.com>
Subject: [PATCH] drm/nouveau: Fix drm poll_helper handling
Date: Mon, 15 May 2017 12:04:31 +0300	[thread overview]
Message-ID: <20170515090431.32325-1-peter.ujfalusi@ti.com> (raw)

Commit cae9ff036eea effectively disabled the drm poll_helper by checking
the wrong flag to see if the driver should enable the poll or not:
mode_config.poll_enabled is only set to true by poll_init and it is not
indicating if the poll is enabled or not.
nouveau_display_create() will initialize the poll and going to disable it
right away. After poll_init() the mode_config.poll_enabled will be true,
but the poll itself is disabled.

To avoid the race caused by calling the poll_enable() from different paths,
this patch will enable the poll from one place, in the
nouveau_display_hpd_work().

In case the pm_runtime is disabled we will enable the poll in
nouveau_drm_load() once.

Fixes: cae9ff036eea ("drm/nouveau: Don't enabling polling twice on runtime resume")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gleb Nemshilov <gleb@fastmail.com>
---
Hi,

this patch was created and tested in connection of:
https://bugs.freedesktop.org/show_bug.cgi?id=98690

Regards,
Peter

 drivers/gpu/drm/nouveau/nouveau_display.c | 6 ++----
 drivers/gpu/drm/nouveau/nouveau_drm.c     | 6 +++---
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 21b10f9840c9..549763f5e17d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -360,6 +360,8 @@ nouveau_display_hpd_work(struct work_struct *work)
 	pm_runtime_get_sync(drm->dev->dev);
 
 	drm_helper_hpd_irq_event(drm->dev);
+	/* enable polling for external displays */
+	drm_kms_helper_poll_enable(drm->dev);
 
 	pm_runtime_mark_last_busy(drm->dev->dev);
 	pm_runtime_put_sync(drm->dev->dev);
@@ -413,10 +415,6 @@ nouveau_display_init(struct drm_device *dev)
 	if (ret)
 		return ret;
 
-	/* enable polling for external displays */
-	if (!dev->mode_config.poll_enabled)
-		drm_kms_helper_poll_enable(dev);
-
 	/* enable hotplug interrupts */
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		struct nouveau_connector *conn = nouveau_connector(connector);
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 2b6ac24ce690..36268e1802b5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -502,6 +502,9 @@ nouveau_drm_load(struct drm_device *dev, unsigned long flags)
 		pm_runtime_allow(dev->dev);
 		pm_runtime_mark_last_busy(dev->dev);
 		pm_runtime_put(dev->dev);
+	} else {
+		/* enable polling for external displays */
+		drm_kms_helper_poll_enable(dev);
 	}
 	return 0;
 
@@ -774,9 +777,6 @@ nouveau_pmops_runtime_resume(struct device *dev)
 
 	ret = nouveau_do_resume(drm_dev, true);
 
-	if (!drm_dev->mode_config.poll_enabled)
-		drm_kms_helper_poll_enable(drm_dev);
-
 	/* do magic */
 	nvif_mask(&device->object, 0x088488, (1 << 25), (1 << 25));
 	vga_switcheroo_set_dynamic_switch(pdev, VGA_SWITCHEROO_ON);
-- 
2.12.2

             reply	other threads:[~2017-05-15  9:04 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-15  9:04 Peter Ujfalusi [this message]
2017-05-15 14:11 ` Lyude Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170515090431.32325-1-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=airlied@linux.ie \
    --cc=airlied@redhat.com \
    --cc=bskeggs@redhat.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gleb@fastmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lyude@redhat.com \
    --cc=nouveau@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®