From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1756801AbdEUMvF (ORCPT <rfc822;w@1wt.eu>);
        Sun, 21 May 2017 08:51:05 -0400
Received: from mail-ua0-f196.google.com ([209.85.217.196]:33602 "EHLO
        mail-ua0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1752831AbdEUMtm (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Sun, 21 May 2017 08:49:42 -0400
From: Ralph Sennhauser <ralph.sennhauser@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Gregory Clement <gregory.clement@free-electrons.com>,
        Imre Kaloz <kaloz@openwrt.org>, Jason Cooper <jason@lakedaemon.net>,
        Andrew Lunn <andrew@lunn.ch>,
        Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
        Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
        Russell King <linux@armlinux.org.uk>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Ralph Sennhauser <ralph.sennhauser@gmail.com>
Subject: [PATCH 08/13] ARM: dts: armada-385-linksys: use binary unit prefixes
Date: Sun, 21 May 2017 14:48:57 +0200
Message-Id: <20170521124903.11050-9-ralph.sennhauser@gmail.com>
X-Mailer: git-send-email 2.10.2
In-Reply-To: <20170521124903.11050-1-ralph.sennhauser@gmail.com>
References: <20170521124903.11050-1-ralph.sennhauser@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Use IEEE 1541-2002 unit prefixes for sizes.

Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
---
 arch/arm/boot/dts/armada-385-linksys.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index f1d6b77..4049eaf 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -52,7 +52,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
 	};
 
 	soc {
@@ -180,50 +180,50 @@
 
 	partition@0 {
 		label = "u-boot";
-		reg = <0x0000000 0x200000>;  /* 2MB */
+		reg = <0x0000000 0x200000>;  /* 2MiB */
 		read-only;
 	};
 
 	partition@100000 {
 		label = "u_env";
-		reg = <0x200000 0x40000>;    /* 256KB */
+		reg = <0x200000 0x40000>;    /* 256KiB */
 	};
 
 	partition@140000 {
 		label = "s_env";
-		reg = <0x240000 0x40000>;    /* 256KB */
+		reg = <0x240000 0x40000>;    /* 256KiB */
 	};
 
 	partition@900000 {
 		label = "devinfo";
-		reg = <0x900000 0x100000>;   /* 1MB */
+		reg = <0x900000 0x100000>;   /* 1MiB */
 		read-only;
 	};
 
 	/* kernel1 overlaps with rootfs1 by design */
 	partition@a00000 {
 		label = "kernel1";
-		reg = <0xa00000 0x2800000>;  /* 40MB */
+		reg = <0xa00000 0x2800000>;  /* 40MiB */
 	};
 
 	partition@1000000 {
 		label = "rootfs1";
-		reg = <0x1000000 0x2200000>;  /* 34MB */
+		reg = <0x1000000 0x2200000>;  /* 34MiB */
 	};
 
 	/* kernel2 overlaps with rootfs2 by design */
 	partition@3200000 {
 		label = "kernel2";
-		reg = <0x3200000 0x2800000>; /* 40MB */
+		reg = <0x3200000 0x2800000>; /* 40MiB */
 	};
 
 	partition@3800000 {
 		label = "rootfs2";
-		reg = <0x3800000 0x2200000>; /* 34MB */
+		reg = <0x3800000 0x2200000>; /* 34MiB */
 	};
 
 	/*
-	 * 38MB, last MB is for the BBT, not writable
+	 * 38MiB, last MiB is for the BBT, not writable
 	 */
 	partition@5a00000 {
 		label = "syscfg";
@@ -238,7 +238,7 @@
 	 */
 	partition@180000 {
 		label = "unused_area";
-		reg = <0x280000 0x680000>;   /* 6.5MB */
+		reg = <0x280000 0x680000>;   /* 6.5MiB */
 	};
 };
 
-- 
2.10.2