From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
To: <gregkh@linuxfoundation.org>
Cc: <devel@driverdev.osuosl.org>, <linux-kernel@vger.kernel.org>,
<agraf@suse.de>, <arnd@arndb.de>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>, <bogdan.purcareata@nxp.com>,
<stuyoder@gmail.com>, <laurentiu.tudor@nxp.com>,
<nipun.gupta@nxp.com>
Subject: [PATCH 1/2] staging: fsl-dpaa2/eth: Fix address translations
Date: Wed, 24 May 2017 07:13:27 -0500 [thread overview]
Message-ID: <20170524121328.16984-1-ruxandra.radulescu@nxp.com> (raw)
Use the correct mechanisms for translating a DMA-mapped IOVA
address into a virtual one. Without this fix, once SMMU is
enabled on Layerscape platforms, the Ethernet driver throws
IOMMU translation faults.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
---
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 25 +++++++++++++++++++------
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 1 +
2 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
index 6f9eed66c64d..3fee0d6f17e0 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
@@ -37,6 +37,7 @@
#include <linux/interrupt.h>
#include <linux/msi.h>
#include <linux/kthread.h>
+#include <linux/iommu.h>
#include "../../fsl-mc/include/mc.h"
#include "../../fsl-mc/include/mc-sys.h"
@@ -54,6 +55,16 @@ MODULE_DESCRIPTION("Freescale DPAA2 Ethernet Driver");
const char dpaa2_eth_drv_version[] = "0.1";
+static void *dpaa2_iova_to_virt(struct iommu_domain *domain,
+ dma_addr_t iova_addr)
+{
+ phys_addr_t phys_addr;
+
+ phys_addr = domain ? iommu_iova_to_phys(domain, iova_addr) : iova_addr;
+
+ return phys_to_virt(phys_addr);
+}
+
static void validate_rx_csum(struct dpaa2_eth_priv *priv,
u32 fd_status,
struct sk_buff *skb)
@@ -98,12 +109,11 @@ static void free_rx_fd(struct dpaa2_eth_priv *priv,
sgt = vaddr + dpaa2_fd_get_offset(fd);
for (i = 0; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) {
addr = dpaa2_sg_get_addr(&sgt[i]);
+ sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
DMA_FROM_DEVICE);
- sg_vaddr = phys_to_virt(addr);
skb_free_frag(sg_vaddr);
-
if (dpaa2_sg_is_final(&sgt[i]))
break;
}
@@ -159,10 +169,10 @@ static struct sk_buff *build_frag_skb(struct dpaa2_eth_priv *priv,
/* Get the address and length from the S/G entry */
sg_addr = dpaa2_sg_get_addr(sge);
+ sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, sg_addr);
dma_unmap_single(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE,
DMA_FROM_DEVICE);
- sg_vaddr = phys_to_virt(sg_addr);
sg_length = dpaa2_sg_get_len(sge);
if (i == 0) {
@@ -222,8 +232,8 @@ static void dpaa2_eth_rx(struct dpaa2_eth_priv *priv,
/* Tracing point */
trace_dpaa2_rx_fd(priv->net_dev, fd);
+ vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, DMA_FROM_DEVICE);
- vaddr = phys_to_virt(addr);
prefetch(vaddr + priv->buf_layout.private_data_size);
prefetch(vaddr + dpaa2_fd_get_offset(fd));
@@ -490,7 +500,7 @@ static void free_tx_fd(const struct dpaa2_eth_priv *priv,
struct dpaa2_fas *fas;
fd_addr = dpaa2_fd_get_addr(fd);
- skbh = phys_to_virt(fd_addr);
+ skbh = dpaa2_iova_to_virt(priv->iommu_domain, fd_addr);
if (fd_format == dpaa2_fd_single) {
skb = *skbh;
@@ -802,10 +812,11 @@ static void drain_bufs(struct dpaa2_eth_priv *priv, int count)
}
for (i = 0; i < ret; i++) {
/* Same logic as on regular Rx path */
+ vaddr = dpaa2_iova_to_virt(priv->iommu_domain,
+ buf_array[i]);
dma_unmap_single(dev, buf_array[i],
DPAA2_ETH_RX_BUF_SIZE,
DMA_FROM_DEVICE);
- vaddr = phys_to_virt(buf_array[i]);
skb_free_frag(vaddr);
}
} while (ret);
@@ -2358,6 +2369,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev)
priv = netdev_priv(net_dev);
priv->net_dev = net_dev;
+ priv->iommu_domain = iommu_get_domain_for_dev(dev);
+
/* Obtain a MC portal */
err = fsl_mc_portal_allocate(dpni_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
&priv->mc_io);
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
index c67cced55b72..55b47623008c 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
@@ -301,6 +301,7 @@ struct dpaa2_eth_priv {
struct fsl_mc_device *dpbp_dev;
struct dpbp_attr dpbp_attrs;
+ struct iommu_domain *iommu_domain;
u16 tx_qdid;
struct fsl_mc_io *mc_io;
--
2.11.0
next reply other threads:[~2017-05-24 12:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-24 12:13 Ioana Radulescu [this message]
2017-05-24 12:13 ` [PATCH 2/2] staging: fsl-dpaa2/eth: Map Tx buffers as bidirectional Ioana Radulescu
2017-05-24 12:33 ` [PATCH 1/2] staging: fsl-dpaa2/eth: Fix address translations Laurentiu Tudor
2017-05-25 12:31 ` Ruxandra Ioana Radulescu
2017-05-29 13:57 ` Laurentiu Tudor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170524121328.16984-1-ruxandra.radulescu@nxp.com \
--to=ruxandra.radulescu@nxp.com \
--cc=agraf@suse.de \
--cc=arnd@arndb.de \
--cc=bogdan.purcareata@nxp.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=iommu@lists.linux-foundation.org \
--cc=laurentiu.tudor@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nipun.gupta@nxp.com \
--cc=stuyoder@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®