From: Guodong Xu <guodong.xu@linaro.org>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
xuwei5@hisilicon.com, catalin.marinas@arm.com,
will.deacon@arm.com, lgirdwood@gmail.com, broonie@kernel.org,
khilman@baylibre.com, arnd@arndb.de,
gregory.clement@free-electrons.com, olof@lixom.net,
thomas.petazzoni@free-electrons.com,
yamada.masahiro@socionext.com, riku.voipio@linaro.org,
treding@nvidia.com, krzk@kernel.org, eric@anholt.net,
damm+renesas@opensource.se, ard.biesheuvel@linaro.org,
linus.walleij@linaro.org, geert+renesas@glider.be
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
hw.wangxiaoyin@hisilicon.com, Guodong Xu <guodong.xu@linaro.org>
Subject: [PATCH 3/6] mfd: hi6421v530: add support for HiSilicon Hi6421v530
Date: Fri, 26 May 2017 14:35:15 +0800 [thread overview]
Message-ID: <20170526063518.21246-4-guodong.xu@linaro.org> (raw)
In-Reply-To: <20170526063518.21246-1-guodong.xu@linaro.org>
Add support for HiSilicon Hi6421v530 PMIC. Hi6421v530 communicates with
main SoC via memory-mapped I/O.
Hi6421v530 and Hi6421 are PMIC chips from the same vendor, HiSilicon, but
at different revisions. They share the same memory-mapped I/O design. They
differ in regulator details, eg. LDO voltage points.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
---
drivers/mfd/Kconfig | 9 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421v530-pmic.c | 92 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 102 insertions(+)
create mode 100644 drivers/mfd/hi6421v530-pmic.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3eb5c93..bdc8304 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -388,6 +388,15 @@ config MFD_HI6421_PMIC
menus in order to enable them.
We communicate with the Hi6421 via memory-mapped I/O.
+config MFD_HI6421V530_PMIC
+ tristate "HiSilicon Hi6421v530 PMU/Codec IC"
+ depends on OF
+ select MFD_CORE
+ select REGMAP_MMIO
+ help
+ Add support for HiSilicon Hi6421v530 PMIC. Hi6421v530 communicates
+ with main SoC via memory-mapped I/O.
+
config MFD_HI655X_PMIC
tristate "HiSilicon Hi655X series PMU/Codec IC"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c16bf1e..cde62fc 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -206,6 +206,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI6421V530_PMIC) += hi6421v530-pmic.o
obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
diff --git a/drivers/mfd/hi6421v530-pmic.c b/drivers/mfd/hi6421v530-pmic.c
new file mode 100644
index 0000000..651659a
--- /dev/null
+++ b/drivers/mfd/hi6421v530-pmic.c
@@ -0,0 +1,92 @@
+/*
+ * Device driver for Hi6421 IC
+ *
+ * Copyright (c) <2017> HiSilicon Technologies Co., Ltd.
+ * http://www.hisilicon.com
+ * Copyright (c) <2017> Linaro Ltd.
+ * http://www.linaro.org
+ *
+ * Author: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
+ * Guodong Xu <guodong.xu@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/hi6421-pmic.h>
+
+static const struct mfd_cell hi6421v530_devs[] = {
+ { .name = "hi6421v530-regulator", },
+};
+
+static int hi6421v530_pmic_probe(struct platform_device *pdev)
+{
+ struct hi6421_pmic *pmic;
+ struct resource *res;
+ void __iomem *base;
+ int ret;
+
+ pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ pmic->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
+ &hi6421_regmap_config);
+ if (IS_ERR(pmic->regmap)) {
+ dev_err(&pdev->dev,
+ "regmap init failed: %ld\n", PTR_ERR(pmic->regmap));
+ return PTR_ERR(pmic->regmap);
+ }
+
+ platform_set_drvdata(pdev, pmic);
+
+ ret = devm_mfd_add_devices(&pdev->dev, 0, hi6421v530_devs,
+ ARRAY_SIZE(hi6421v530_devs), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "add mfd devices failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id of_hi6421v530_pmic_match_tbl[] = {
+ { .compatible = "hisilicon,hi6421v530-pmic", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_hi6421v530_pmic_match_tbl);
+
+static struct platform_driver hi6421v530_pmic_driver = {
+ .driver = {
+ .name = "hi6421v530_pmic",
+ .of_match_table = of_hi6421v530_pmic_match_tbl,
+ },
+ .probe = hi6421v530_pmic_probe,
+};
+module_platform_driver(hi6421v530_pmic_driver);
+
+MODULE_AUTHOR("Guodong Xu <guodong.xu@linaro.org>");
+MODULE_DESCRIPTION("Hi6421v530 PMIC driver");
+MODULE_LICENSE("GPL v2");
--
2.10.2
next prev parent reply other threads:[~2017-05-26 6:36 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-26 6:35 [PATCH 0/6] MFD: add driver for HiSilicon Hi6421v530 PMIC Guodong Xu
2017-05-26 6:35 ` [PATCH 1/6] dt-bindings: mfd: Add hi6421v530 bindings Guodong Xu
2017-05-31 18:07 ` Rob Herring
2017-06-02 9:01 ` Guodong Xu
2017-05-26 6:35 ` [PATCH 2/6] mfd: hi6421-pmic: move hi6421_regmap_config definition to header file Guodong Xu
2017-05-26 8:33 ` Arnd Bergmann
2017-05-27 3:08 ` Guodong Xu
2017-05-26 6:35 ` Guodong Xu [this message]
2017-05-30 7:36 ` [PATCH 3/6] mfd: hi6421v530: add support for HiSilicon Hi6421v530 Lee Jones
2017-06-02 9:35 ` Guodong Xu
2017-05-26 6:35 ` [PATCH 4/6] regulator: hi6421v530: add driver for hi6421v530 voltage regulator Guodong Xu
2017-05-26 11:38 ` Mark Brown
2017-05-27 9:47 ` Guodong Xu
2017-05-26 12:13 ` Javier Martinez Canillas
2017-05-27 9:42 ` Guodong Xu
2017-05-26 6:35 ` [PATCH 5/6] arm64: dts: hikey960: add device node for pmic and regulators Guodong Xu
2017-05-26 6:35 ` [PATCH 6/6] arm64: defconfig: enable hi6421v530 MFD and regulator Guodong Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170526063518.21246-4-guodong.xu@linaro.org \
--to=guodong.xu@linaro.org \
--cc=ard.biesheuvel@linaro.org \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=damm+renesas@opensource.se \
--cc=devicetree@vger.kernel.org \
--cc=eric@anholt.net \
--cc=geert+renesas@glider.be \
--cc=gregory.clement@free-electrons.com \
--cc=hw.wangxiaoyin@hisilicon.com \
--cc=khilman@baylibre.com \
--cc=krzk@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=riku.voipio@linaro.org \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@free-electrons.com \
--cc=treding@nvidia.com \
--cc=will.deacon@arm.com \
--cc=xuwei5@hisilicon.com \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®