From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751105AbdE3UFp (ORCPT ); Tue, 30 May 2017 16:05:45 -0400 Received: from mga04.intel.com ([192.55.52.120]:19409 "EHLO mga04.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751057AbdE3UFn (ORCPT ); Tue, 30 May 2017 16:05:43 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.38,419,1491289200"; d="scan'208";a="1136290858" Date: Tue, 30 May 2017 11:53:57 -0700 From: "Raj, Ashok" To: Bjorn Helgaas Cc: Jean-Phillipe Brucker , Bjorn Helgaas , Joerg Roedel , linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, CQ Tang , David Woodhouse , iommu@lists.linux-foundation.org, ashok.raj@intel.com Subject: Re: [PATCH 2/2] PCI: Save properties required to handle FLR for replay purposes. Message-ID: <20170530185356.GA167854@otc-nc-03> References: <1496161549-167468-1-git-send-email-ashok.raj@intel.com> <1496161549-167468-3-git-send-email-ashok.raj@intel.com> <20170530195033.GB4664@bhelgaas-glaptop.roam.corp.google.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20170530195033.GB4664@bhelgaas-glaptop.roam.corp.google.com> User-Agent: Mutt/1.5.24 (2015-08-30) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, May 30, 2017 at 02:50:33PM -0500, Bjorn Helgaas wrote: > On Tue, May 30, 2017 at 09:25:49AM -0700, Ashok Raj wrote: > > From: CQ Tang > > > > Requires: https://patchwork.kernel.org/patch/9593891 > > The above patch (9593891) is not in my tree or Linus' tree, so I can't > do anything with this yet. I resent the patch as part of this series.. maybe should have massaged the commit message.. my bad :-(. Its the first patch in this series. Jean mentioned it might take him a while before the SVM patches stabilize. Since this patch is pretty much stand alone, he asked if i could resend it along with the one i need. Sorry for any confusion. Cheers, Ashok > > > After a FLR, pci-states need to be restored. This patch saves PASID features > > and PRI reqs cached. > > > > To: Bjorn Helgaas > > To: Joerg Roedel > > To: linux-pci@vger.kernel.org > > To: linux-kernel@vger.kernel.org > > Cc: Jean-Phillipe Brucker > > Cc: David Woodhouse > > Cc: iommu@lists.linux-foundation.org > > > > Signed-off-by: CQ Tang > > Signed-off-by: Ashok Raj > > --- > > drivers/pci/ats.c | 65 +++++++++++++++++++++++++++++++++++++------------ > > drivers/pci/pci.c | 3 +++ > > include/linux/pci-ats.h | 10 ++++++++ > > include/linux/pci.h | 6 +++++ > > 4 files changed, 69 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c > > index 2126497..a769955 100644 > > --- a/drivers/pci/ats.c > > +++ b/drivers/pci/ats.c > > @@ -160,17 +160,16 @@ int pci_enable_pri(struct pci_dev *pdev, u32 reqs) > > if (!pos) > > return -EINVAL; > > > > - pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control); > > pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status); > > - if ((control & PCI_PRI_CTRL_ENABLE) || > > - !(status & PCI_PRI_STATUS_STOPPED)) > > + if (!(status & PCI_PRI_STATUS_STOPPED)) > > return -EBUSY; > > > > pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests); > > reqs = min(max_requests, reqs); > > + pdev->pri_reqs_alloc = reqs; > > pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs); > > > > - control |= PCI_PRI_CTRL_ENABLE; > > + control = PCI_PRI_CTRL_ENABLE; > > pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control); > > > > pdev->pri_enabled = 1; > > @@ -206,6 +205,29 @@ void pci_disable_pri(struct pci_dev *pdev) > > EXPORT_SYMBOL_GPL(pci_disable_pri); > > > > /** > > + * pci_restore_pri_state - Restore PRI > > + * @pdev: PCI device structure > > + * > > + */ > > +void pci_restore_pri_state(struct pci_dev *pdev) > > +{ > > + u16 control = PCI_PRI_CTRL_ENABLE; > > + u32 reqs = pdev->pri_reqs_alloc; > > + int pos; > > + > > + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI); > > + if (!pos) > > + return; > > + > > + if (!pdev->pri_enabled) > > + return; > > + > > + pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs); > > + pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control); > > +} > > +EXPORT_SYMBOL_GPL(pci_restore_pri_state); > > + > > +/** > > * pci_reset_pri - Resets device's PRI state > > * @pdev: PCI device structure > > * > > @@ -224,12 +246,7 @@ int pci_reset_pri(struct pci_dev *pdev) > > if (!pos) > > return -EINVAL; > > > > - pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control); > > - if (control & PCI_PRI_CTRL_ENABLE) > > - return -EBUSY; > > - > > - control |= PCI_PRI_CTRL_RESET; > > - > > + control = PCI_PRI_CTRL_RESET; > > pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control); > > > > return 0; > > @@ -259,12 +276,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features) > > if (!pos) > > return -EINVAL; > > > > - pci_read_config_word(pdev, pos + PCI_PASID_CTRL, &control); > > pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported); > > - > > - if (control & PCI_PASID_CTRL_ENABLE) > > - return -EINVAL; > > - > > supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV; > > > > /* User wants to enable anything unsupported? */ > > @@ -272,6 +284,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features) > > return -EINVAL; > > > > control = PCI_PASID_CTRL_ENABLE | features; > > + pdev->pasid_features = features; > > > > pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control); > > > > @@ -305,6 +318,28 @@ void pci_disable_pasid(struct pci_dev *pdev) > > EXPORT_SYMBOL_GPL(pci_disable_pasid); > > > > /** > > + * pci_restore_pasid_state - Restore PASID capabilities. > > + * @pdev: PCI device structure > > + * > > + */ > > +void pci_restore_pasid_state(struct pci_dev *pdev) > > +{ > > + u16 control; > > + int pos; > > + > > + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID); > > + if (!pos) > > + return; > > + > > + if (!pdev->pasid_enabled) > > + return; > > + > > + control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features; > > + pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control); > > +} > > +EXPORT_SYMBOL_GPL(pci_restore_pasid_state); > > + > > +/** > > * pci_pasid_features - Check which PASID features are supported > > * @pdev: PCI device structure > > * > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 7904d02..c9a6510 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -28,6 +28,7 @@ > > #include > > #include > > #include > > +#include > > #include > > #include > > #include > > @@ -1171,6 +1172,8 @@ void pci_restore_state(struct pci_dev *dev) > > > > /* PCI Express register must be restored first */ > > pci_restore_pcie_state(dev); > > + pci_restore_pasid_state(dev); > > + pci_restore_pri_state(dev); > > pci_restore_ats_state(dev); > > pci_restore_vc_state(dev); > > > > diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h > > index 57e0b82..782fb8e 100644 > > --- a/include/linux/pci-ats.h > > +++ b/include/linux/pci-ats.h > > @@ -7,6 +7,7 @@ > > > > int pci_enable_pri(struct pci_dev *pdev, u32 reqs); > > void pci_disable_pri(struct pci_dev *pdev); > > +void pci_restore_pri_state(struct pci_dev *pdev); > > int pci_reset_pri(struct pci_dev *pdev); > > > > #else /* CONFIG_PCI_PRI */ > > @@ -20,6 +21,10 @@ static inline void pci_disable_pri(struct pci_dev *pdev) > > { > > } > > > > +static inline void pci_restore_pri_state(struct pci_dev *pdev) > > +{ > > +} > > + > > static inline int pci_reset_pri(struct pci_dev *pdev) > > { > > return -ENODEV; > > @@ -31,6 +36,7 @@ static inline int pci_reset_pri(struct pci_dev *pdev) > > > > int pci_enable_pasid(struct pci_dev *pdev, int features); > > void pci_disable_pasid(struct pci_dev *pdev); > > +void pci_restore_pasid_state(struct pci_dev *pdev); > > int pci_pasid_features(struct pci_dev *pdev); > > int pci_max_pasids(struct pci_dev *pdev); > > > > @@ -45,6 +51,10 @@ static inline void pci_disable_pasid(struct pci_dev *pdev) > > { > > } > > > > +static inline void pci_restore_pasid_state(struct pci_dev *pdev) > > +{ > > +} > > + > > static inline int pci_pasid_features(struct pci_dev *pdev) > > { > > return -EINVAL; > > diff --git a/include/linux/pci.h b/include/linux/pci.h > > index bee980e..1ddb8e0 100644 > > --- a/include/linux/pci.h > > +++ b/include/linux/pci.h > > @@ -395,6 +395,12 @@ struct pci_dev { > > u8 ats_stu; /* ATS Smallest Translation Unit */ > > atomic_t ats_ref_cnt; /* number of VFs with ATS enabled */ > > #endif > > +#ifdef CONFIG_PCI_PRI > > + u32 pri_reqs_alloc; /* Number of PRI requests allocated */ > > +#endif > > +#ifdef CONFIG_PCI_PASID > > + u16 pasid_features; > > +#endif > > phys_addr_t rom; /* Physical address of ROM if it's not from the BAR */ > > size_t romlen; /* Length of ROM if it's not from the BAR */ > > char *driver_override; /* Driver name to force a match */ > > -- > > 2.7.4 > >