From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 55/58] misc: remove atmel_tclib.c
Date: Tue, 30 May 2017 23:51:36 +0200 [thread overview]
Message-ID: <20170530215139.9983-56-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <20170530215139.9983-1-alexandre.belloni@free-electrons.com>
The last user of atmel_tclib is gone, remove it too.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
drivers/misc/Kconfig | 33 --------
drivers/misc/Makefile | 1 -
drivers/misc/atmel_tclib.c | 198 ---------------------------------------------
include/linux/atmel_tc.h | 9 ---
4 files changed, 241 deletions(-)
delete mode 100644 drivers/misc/atmel_tclib.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 2cba76e6fa3c..5946ac3399ad 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -51,39 +51,6 @@ config AD525X_DPOT_SPI
To compile this driver as a module, choose M here: the
module will be called ad525x_dpot-spi.
-config ATMEL_TCLIB
- bool "Atmel AT32/AT91 Timer/Counter Library"
- depends on (AVR32 || ARCH_AT91)
- help
- Select this if you want a library to allocate the Timer/Counter
- blocks found on many Atmel processors. This facilitates using
- these blocks by different drivers despite processor differences.
-
-config ATMEL_TCB_CLKSRC
- bool "TC Block Clocksource"
- depends on ATMEL_TCLIB
- default y
- help
- Select this to get a high precision clocksource based on a
- TC block with a 5+ MHz base clock rate. Two timer channels
- are combined to make a single 32-bit timer.
-
- When GENERIC_CLOCKEVENTS is defined, the third timer channel
- may be used as a clock event device supporting oneshot mode
- (delays of up to two seconds) based on the 32 KiHz clock.
-
-config ATMEL_TCB_CLKSRC_BLOCK
- int
- depends on ATMEL_TCB_CLKSRC
- prompt "TC Block" if CPU_AT32AP700X
- default 0
- range 0 1
- help
- Some chips provide more than one TC block, so you have the
- choice of which one to use for the clock framework. The other
- TC can be used for other purposes, such as PWM generation and
- interval timing.
-
config DUMMY_IRQ
tristate "Dummy IRQ handler"
default n
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 81ef3e67acc9..00adf5088699 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o
obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o
obj-$(CONFIG_INTEL_MID_PTI) += pti.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
-obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o
obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
deleted file mode 100644
index ac24a4bd63f7..000000000000
--- a/drivers/misc/atmel_tclib.c
+++ /dev/null
@@ -1,198 +0,0 @@
-#include <linux/atmel_tc.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/of.h>
-
-/*
- * This is a thin library to solve the problem of how to portably allocate
- * one of the TC blocks. For simplicity, it doesn't currently expect to
- * share individual timers between different drivers.
- */
-
-#if defined(CONFIG_AVR32)
-/* AVR32 has these divide PBB */
-const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, };
-EXPORT_SYMBOL(atmel_tc_divisors);
-
-#elif defined(CONFIG_ARCH_AT91)
-/* AT91 has these divide MCK */
-const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
-EXPORT_SYMBOL(atmel_tc_divisors);
-
-#endif
-
-static DEFINE_SPINLOCK(tc_list_lock);
-static LIST_HEAD(tc_list);
-
-/**
- * atmel_tc_alloc - allocate a specified TC block
- * @block: which block to allocate
- *
- * Caller allocates a block. If it is available, a pointer to a
- * pre-initialized struct atmel_tc is returned. The caller can access
- * the registers directly through the "regs" field.
- */
-struct atmel_tc *atmel_tc_alloc(unsigned block)
-{
- struct atmel_tc *tc;
- struct platform_device *pdev = NULL;
-
- spin_lock(&tc_list_lock);
- list_for_each_entry(tc, &tc_list, node) {
- if (tc->allocated)
- continue;
-
- if ((tc->pdev->dev.of_node && tc->id == block) ||
- (tc->pdev->id == block)) {
- pdev = tc->pdev;
- tc->allocated = true;
- break;
- }
- }
- spin_unlock(&tc_list_lock);
-
- return pdev ? tc : NULL;
-}
-EXPORT_SYMBOL_GPL(atmel_tc_alloc);
-
-/**
- * atmel_tc_free - release a specified TC block
- * @tc: Timer/counter block that was returned by atmel_tc_alloc()
- *
- * This reverses the effect of atmel_tc_alloc(), invalidating the resource
- * returned by that routine and making the TC available to other drivers.
- */
-void atmel_tc_free(struct atmel_tc *tc)
-{
- spin_lock(&tc_list_lock);
- if (tc->allocated)
- tc->allocated = false;
- spin_unlock(&tc_list_lock);
-}
-EXPORT_SYMBOL_GPL(atmel_tc_free);
-
-#if defined(CONFIG_OF)
-static struct atmel_tcb_config tcb_rm9200_config = {
- .counter_width = 16,
-};
-
-static struct atmel_tcb_config tcb_sam9x5_config = {
- .counter_width = 32,
-};
-
-static const struct of_device_id atmel_tcb_dt_ids[] = {
- {
- .compatible = "atmel,at91rm9200-tcb",
- .data = &tcb_rm9200_config,
- }, {
- .compatible = "atmel,at91sam9x5-tcb",
- .data = &tcb_sam9x5_config,
- }, {
- /* sentinel */
- }
-};
-
-MODULE_DEVICE_TABLE(of, atmel_tcb_dt_ids);
-#endif
-
-static int __init tc_probe(struct platform_device *pdev)
-{
- struct atmel_tc *tc;
- struct clk *clk;
- int irq;
- struct resource *r;
- unsigned int i;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return -EINVAL;
-
- tc = devm_kzalloc(&pdev->dev, sizeof(struct atmel_tc), GFP_KERNEL);
- if (!tc)
- return -ENOMEM;
-
- tc->pdev = pdev;
-
- clk = devm_clk_get(&pdev->dev, "t0_clk");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
- tc->slow_clk = devm_clk_get(&pdev->dev, "slow_clk");
- if (IS_ERR(tc->slow_clk))
- return PTR_ERR(tc->slow_clk);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- tc->regs = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(tc->regs))
- return PTR_ERR(tc->regs);
-
- /* Now take SoC information if available */
- if (pdev->dev.of_node) {
- const struct of_device_id *match;
- match = of_match_node(atmel_tcb_dt_ids, pdev->dev.of_node);
- if (match)
- tc->tcb_config = match->data;
-
- tc->id = of_alias_get_id(tc->pdev->dev.of_node, "tcb");
- } else {
- tc->id = pdev->id;
- }
-
- tc->clk[0] = clk;
- tc->clk[1] = devm_clk_get(&pdev->dev, "t1_clk");
- if (IS_ERR(tc->clk[1]))
- tc->clk[1] = clk;
- tc->clk[2] = devm_clk_get(&pdev->dev, "t2_clk");
- if (IS_ERR(tc->clk[2]))
- tc->clk[2] = clk;
-
- tc->irq[0] = irq;
- tc->irq[1] = platform_get_irq(pdev, 1);
- if (tc->irq[1] < 0)
- tc->irq[1] = irq;
- tc->irq[2] = platform_get_irq(pdev, 2);
- if (tc->irq[2] < 0)
- tc->irq[2] = irq;
-
- for (i = 0; i < 3; i++)
- writel(ATMEL_TC_ALL_IRQ, tc->regs + ATMEL_TC_REG(i, IDR));
-
- spin_lock(&tc_list_lock);
- list_add_tail(&tc->node, &tc_list);
- spin_unlock(&tc_list_lock);
-
- platform_set_drvdata(pdev, tc);
-
- return 0;
-}
-
-static void tc_shutdown(struct platform_device *pdev)
-{
- int i;
- struct atmel_tc *tc = platform_get_drvdata(pdev);
-
- for (i = 0; i < 3; i++)
- writel(ATMEL_TC_ALL_IRQ, tc->regs + ATMEL_TC_REG(i, IDR));
-}
-
-static struct platform_driver tc_driver = {
- .driver = {
- .name = "atmel_tcb",
- .of_match_table = of_match_ptr(atmel_tcb_dt_ids),
- },
- .shutdown = tc_shutdown,
-};
-
-static int __init tc_init(void)
-{
- return platform_driver_probe(&tc_driver, tc_probe);
-}
-arch_initcall(tc_init);
diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h
index 468fdfa643f0..92f182345222 100644
--- a/include/linux/atmel_tc.h
+++ b/include/linux/atmel_tc.h
@@ -34,14 +34,6 @@
struct clk;
/**
- * struct atmel_tcb_config - SoC data for a Timer/Counter Block
- * @counter_width: size in bits of a timer counter register
- */
-struct atmel_tcb_config {
- size_t counter_width;
-};
-
-/**
* struct atmel_tc - information about a Timer/Counter Block
* @pdev: physical device
* @regs: mapping through which the I/O registers can be accessed
@@ -64,7 +56,6 @@ struct atmel_tc {
struct platform_device *pdev;
void __iomem *regs;
int id;
- const struct atmel_tcb_config *tcb_config;
int irq[3];
struct clk *clk[3];
struct clk *slow_clk;
--
2.11.0
next prev parent reply other threads:[~2017-05-30 21:54 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-30 21:50 [PATCH 00/58] ARM: at91: rework Atmel TCB drivers Alexandre Belloni
2017-05-30 21:50 ` [PATCH 01/58] ARM: at91: Document new TCB bindings Alexandre Belloni
2017-06-07 21:17 ` Rob Herring
2017-05-30 21:50 ` [PATCH 02/58] ARM: dts: at91: at91rm9200: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:50 ` [PATCH 03/58] ARM: dts: at91: at91rm9200ek: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:50 ` [PATCH 04/58] ARM: dts: at91: mpa1600: " Alexandre Belloni
2017-05-30 21:50 ` [PATCH 05/58] ARM: dts: at91: at91sam9260: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:50 ` [PATCH 06/58] ARM: dts: at91: at91sam9260ek: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:50 ` [PATCH 07/58] ARM: dts: at91: sam9_l9260: " Alexandre Belloni
2017-05-30 21:50 ` [PATCH 08/58] ARM: dts: at91: ethernut5: " Alexandre Belloni
2017-05-30 21:50 ` [PATCH 09/58] ARM: dts: at91: foxg20: " Alexandre Belloni
2017-05-30 21:50 ` [PATCH 10/58] ARM: dts: at91: animeo_ip: " Alexandre Belloni
2017-05-30 21:50 ` [PATCH 11/58] ARM: dts: at91: kizbox: " Alexandre Belloni
2017-05-30 21:50 ` [PATCH 12/58] ARM: dts: at91: at91sam9g20ek: " Alexandre Belloni
2017-05-30 21:50 ` [PATCH 13/58] ARM: dts: at91: ge863-pro3: " Alexandre Belloni
2017-05-30 21:50 ` [PATCH 14/58] ARM: dts: at91: at91sam9261: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:50 ` [PATCH 15/58] ARM: dts: at91: at91sam9261ek: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:50 ` [PATCH 16/58] ARM: dts: at91: at91sam9263: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:50 ` [PATCH 17/58] ARM: dts: at91: at91sam9263ek: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:50 ` [PATCH 18/58] ARM: dts: at91: calao: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 19/58] ARM: dts: at91: at91sam9g45: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:51 ` [PATCH 20/58] ARM: dts: at91: at91sam9m10g45ek: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:51 ` [PATCH 21/58] ARM: dts: at91: pm9g45: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 22/58] ARM: dts: at91: at91sam9rl: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:51 ` [PATCH 23/58] ARM: dts: at91: at91sam9rlek: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:51 ` [PATCH 24/58] ARM: dts: at91: at91sam9n12: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:51 ` [PATCH 25/58] ARM: dts: at91: at91sam9n12ek: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:51 ` [PATCH 26/58] ARM: dts: at91: at91sam9x5: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:51 ` [PATCH 27/58] ARM: dts: at91: at91sam9x5cm: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:51 ` [PATCH 28/58] ARM: dts: at91: acme/g25: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 29/58] ARM: dts: at91: cosino: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 30/58] ARM: dts: at91: kizboxmini: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 31/58] ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:51 ` [PATCH 32/58] ARM: dts: at91: sama5d3xek: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:51 ` [PATCH 33/58] ARM: dts: at91: sama5d3 Xplained: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 34/58] ARM: dts: at91: kizbox2: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 35/58] ARM: dts: at91: sama5d3xek_cmp: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 36/58] ARM: dts: at91: linea/tse850-3: " Alexandre Belloni
2017-06-01 18:52 ` Peter Rosin
2017-05-30 21:51 ` [PATCH 37/58] ARM: dts: at91: sama5d4: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:51 ` [PATCH 38/58] ARM: dts: at91: sama5d4: Add TCB2 Alexandre Belloni
2017-05-30 21:51 ` [PATCH 39/58] ARM: dts: at91: sama5d4ek: use TCB2 as clocksource Alexandre Belloni
2017-05-30 21:51 ` [PATCH 40/58] ARM: dts: at91: sama5d4 Xplained: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 41/58] ARM: dts: at91: ma5d4: " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 42/58] ARM: dts: at91: vinco: " Alexandre Belloni
2017-06-02 12:48 ` Gregory CLEMENT
2017-05-30 21:51 ` [PATCH 43/58] ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2017-05-30 21:51 ` [PATCH 44/58] ARM: dts: at91: sama5d2 Xplained: use TCB0 as clocksource Alexandre Belloni
2017-05-30 21:51 ` [PATCH 45/58] ARM: at91: add TCB registers definitions Alexandre Belloni
2017-05-30 21:51 ` [PATCH 46/58] clocksource/drivers: Add a new driver for the Atmel ARM TC blocks Alexandre Belloni
2017-06-06 15:21 ` Daniel Lezcano
2017-06-06 18:05 ` Alexandre Belloni
2017-06-07 14:17 ` Daniel Lezcano
2017-06-07 15:09 ` Alexandre Belloni
2017-06-07 21:38 ` Daniel Lezcano
2017-06-07 23:11 ` Alexandre Belloni
2017-06-08 6:52 ` Boris Brezillon
2017-06-07 15:27 ` Alexandre Belloni
2017-06-07 21:08 ` Daniel Lezcano
2017-06-07 23:17 ` Alexandre Belloni
2017-06-08 5:42 ` Boris Brezillon
2017-06-08 7:44 ` Daniel Lezcano
2017-06-08 7:59 ` Alexandre Belloni
2017-06-08 8:24 ` Daniel Lezcano
2017-06-08 8:33 ` Boris Brezillon
2017-06-08 8:42 ` Alexandre Belloni
2017-06-08 8:13 ` Boris Brezillon
2017-06-08 8:40 ` Daniel Lezcano
2017-06-08 8:57 ` Boris Brezillon
2017-06-12 12:54 ` Nicolas Ferre
2017-06-12 13:25 ` Daniel Lezcano
2017-06-12 15:26 ` Nicolas Ferre
2017-06-08 6:21 ` Boris Brezillon
2017-05-30 21:51 ` [PATCH 47/58] clocksource/drivers: timer-atmel-tcbclksrc: add clockevent device Alexandre Belloni
2017-05-30 21:51 ` [PATCH 48/58] clocksource/drivers: timer-atmel-tcbclksrc: add clockevent device on separate channel Alexandre Belloni
2017-05-30 21:51 ` [PATCH 49/58] clocksource/drivers: atmel-pit: allow unselecting ATMEL_PIT Alexandre Belloni
2017-05-30 21:51 ` [PATCH 50/58] ARM: at91/defconfig: sama5: unselect ATMEL_PIT Alexandre Belloni
2017-05-30 21:51 ` [PATCH 51/58] ARM: at91/defconfig: at91_dt " Alexandre Belloni
2017-05-30 21:51 ` [PATCH 52/58] PWM: atmel-tcb: switch to new binding Alexandre Belloni
2017-05-30 21:51 ` [PATCH 53/58] ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding Alexandre Belloni
2017-05-30 21:51 ` [PATCH 54/58] clocksource/drivers: remove tcb_clksrc Alexandre Belloni
2017-05-30 21:51 ` Alexandre Belloni [this message]
2017-05-30 21:51 ` [PATCH 56/58] ARM: configs: at91: remove ATMEL_TCLIB Alexandre Belloni
2017-05-30 21:51 ` [PATCH 57/58] ARM: multi_v7_defconfig: Remove ATMEL_TCLIB Kconfig symbol Alexandre Belloni
2017-05-30 21:51 ` [PATCH 58/58] ARM: multi_v5_defconfig: " Alexandre Belloni
2017-05-31 6:34 ` [PATCH 00/58] ARM: at91: rework Atmel TCB drivers Peter Rosin
2017-05-31 7:21 ` Alexandre Belloni
2017-07-06 6:40 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170530215139.9983-56-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®