From: Ralph Sennhauser <ralph.sennhauser@gmail.com>
To: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Richard Genoud <richard.genoud@gmail.com>,
Ralph Sennhauser <ralph.sennhauser@gmail.com>
Subject: [PATCH] ARM: dts: mvebu: Add PWM properties to .dtsi files
Date: Thu, 1 Jun 2017 22:09:26 +0200 [thread overview]
Message-ID: <20170601200926.22453-1-ralph.sennhauser@gmail.com> (raw)
From: Andrew Lunn <andrew@lunn.ch>
Add properties to the GPIO nodes for Armada 370/XP to allow them to be
also used as PWM lines.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427294/
[Ralph Sennhauser: Add new compatible string marvell,armada-370-gpio]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
Hi Gregory,
I took the commit which is already in next, updated the compatible
string to "marvell,armada-370-gpio" and ammended the commit message
accordingly.
This one is intended to replace the one in next if/when the the change
to the compatible string from "marvell,armada-370-xp-gpio" to
"marvell,armada-370-gpio" is accepted. ("gpio: mvebu: change compatible
string for PWM support")
Ralph
---
arch/arm/boot/dts/armada-370.dtsi | 19 ++++++++++++++-----
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 16 ++++++++++++----
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 19 ++++++++++++++-----
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 19 ++++++++++++++-----
4 files changed, 54 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index cc011c8..f9cf127 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -137,29 +137,38 @@
};
gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio@18180 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
reg = <0x18180 0x40>;
ngpios = <2>;
gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 07c5090..9f25814 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -202,25 +202,33 @@
internal-regs {
gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <17>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>;
+ clocks = <&coreclk 0>;
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 64e936a..2bfe07a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -285,29 +285,38 @@
internal-regs {
gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio@18180 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index d1383dd..6c33935 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -323,29 +323,38 @@
internal-regs {
gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio@18180 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
--
2.10.2
next reply other threads:[~2017-06-01 20:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 20:09 Ralph Sennhauser [this message]
2017-06-13 8:48 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170601200926.22453-1-ralph.sennhauser@gmail.com \
--to=ralph.sennhauser@gmail.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=richard.genoud@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome