From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753367AbdFPLzz (ORCPT ); Fri, 16 Jun 2017 07:55:55 -0400 Received: from fllnx210.ext.ti.com ([198.47.19.17]:55710 "EHLO fllnx210.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752993AbdFPLzt (ORCPT ); Fri, 16 Jun 2017 07:55:49 -0400 From: Kishon Vijay Abraham I To: Tony Lindgren , CC: Rob Herring , , , , , Ulf Hansson , , Russell King , Subject: [PATCH 08/12] ARM: dts: am571x-idk: Add pinmux configuration for MMC Date: Fri, 16 Jun 2017 17:24:35 +0530 Message-ID: <20170616115439.8508-9-kishon@ti.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170616115439.8508-1-kishon@ti.com> References: <20170616115439.8508-1-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay configuration values for the various MMC modes for dra72 SoC and use it in the pinctrl properties of MMC devicetree nodes present in am571x-idk.dts. Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/am571x-idk.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index e685c8e811b0..875291d1bdd7 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -11,6 +11,7 @@ #include #include #include "am57xx-idk-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi" / { model = "TI AM5718 IDK"; @@ -72,3 +73,21 @@ id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; +}; -- 2.11.0