[PATCH for v4.9 LTS 09/86] ARM64: dts: amlogic: Add Meson GX dtsi from GXBB

["Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit c328666d58aac4880bf0934eb915f9c5d1801360 ]

Move all non-gxbb specific nodes to a common GX dtsi.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi   | 200 +++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 895 ++++++++++++----------------
 2 files changed, 579 insertions(+), 516 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gx.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
new file mode 100644
index 000000000000..0737056b369f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: cbus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84c0 0x0 0x14>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		aobus: aobus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004c0 0x0 0x14>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+		};
+
+		periphs: periphs@c8834000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8834000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+		};
+
+
+		hiubus: hiubus@c883c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc883c000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+		};
+
+		apb: apb@d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 610e0e1c3cee..443811b497de 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -40,9 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "meson-gx.dtsi"
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 #include <dt-bindings/clock/gxbb-clkc.h>
@@ -51,56 +49,6 @@
 
 / {
 	compatible = "amlogic,meson-gxbb";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <0x2>;
-		#size-cells = <0x0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
 
 	firmware {
 		sm: secure-monitor {
@@ -126,31 +74,7 @@
 		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-
 	soc {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
 		usb0_phy: phy@c0000000 {
 			compatible = "amlogic,meson-gxbb-usb2-phy";
 			#phy-cells = <0>;
@@ -170,500 +94,439 @@
 			status = "disabled";
 		};
 
-		cbus: cbus@c1100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc1100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
 
-			reset: reset-controller@4404 {
-				compatible = "amlogic,meson-gxbb-reset";
-				reg = <0x0 0x04404 0x0 0x20>;
-				#reset-cells = <1>;
-			};
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
 
-			uart_A: serial@84c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x84c0 0x0 0x14>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000
+			       0x0 0xc8834540 0x0 0x4>;
+			interrupts = <0 8 1>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+	};
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson-gxbb-reset";
+		reg = <0x0 0x04404 0x0 0x20>;
+		#reset-cells = <1>;
+	};
+
+	uart_B: serial@84dc {
+		compatible = "amlogic,meson-uart";
+		reg = <0x0 0x84dc 0x0 0x14>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&xtal>;
+		status = "disabled";
+	};
+
+	pwm_ab: pwm@8550 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x08550 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm_cd: pwm@8650 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x08650 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x086c0 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	uart_C: serial@8700 {
+		compatible = "amlogic,meson-uart";
+		reg = <0x0 0x8700 0x0 0x14>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&xtal>;
+		status = "disabled";
+	};
+
+	watchdog@98d0 {
+		compatible = "amlogic,meson-gxbb-wdt";
+		reg = <0x0 0x098d0 0x0 0x10>;
+		clocks = <&xtal>;
+	};
+
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
+	};
+
+	i2c_A: i2c@8500 {
+		compatible = "amlogic,meson-gxbb-i2c";
+		reg = <0x0 0x08500 0x0 0x20>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_I2C>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c_B: i2c@87c0 {
+		compatible = "amlogic,meson-gxbb-i2c";
+		reg = <0x0 0x087c0 0x0 0x20>;
+		interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_I2C>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c_C: i2c@87e0 {
+		compatible = "amlogic,meson-gxbb-i2c";
+		reg = <0x0 0x087e0 0x0 0x20>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_I2C>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-			uart_B: serial@84dc {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x84dc 0x0 0x14>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
 			};
+		};
 
-			pwm_ab: pwm@8550 {
-				compatible = "amlogic,meson-gxbb-pwm";
-				reg = <0x0 0x08550 0x0 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
 			};
+		};
 
-			pwm_cd: pwm@8650 {
-				compatible = "amlogic,meson-gxbb-pwm";
-				reg = <0x0 0x08650 0x0 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
 			};
+		};
 
-			pwm_ef: pwm@86c0 {
-				compatible = "amlogic,meson-gxbb-pwm";
-				reg = <0x0 0x086c0 0x0 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a_3";
 			};
+		};
 
-			uart_C: serial@8700 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x8700 0x0 0x14>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
+		pwm_ao_a_6_pins: pwm_ao_a_6 {
+			mux {
+				groups = "pwm_ao_a_6";
+				function = "pwm_ao_a_6";
 			};
+		};
 
-			watchdog@98d0 {
-				compatible = "amlogic,meson-gxbb-wdt";
-				reg = <0x0 0x098d0 0x0 0x10>;
-				clocks = <&xtal>;
+		pwm_ao_a_12_pins: pwm_ao_a_12 {
+			mux {
+				groups = "pwm_ao_a_12";
+				function = "pwm_ao_a_12";
 			};
+		};
 
-			spifc: spi@8c80 {
-				compatible = "amlogic,meson-gxbb-spifc";
-				reg = <0x0 0x08c80 0x0 0x80>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clkc CLKID_SPI>;
-				status = "disabled";
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
 			};
+		};
+	};
+
+	clkc_AO: clock-controller@040 {
+		compatible = "amlogic,gxbb-aoclkc";
+		reg = <0x0 0x00040 0x0 0x4>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	ir: ir@580 {
+		compatible = "amlogic,meson-gxbb-ir";
+		reg = <0x0 0x00580 0x0 0x40>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
+	};
+
+	pwm_ab_AO: pwm@550 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x0550 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	i2c_AO: i2c@500 {
+		compatible = "amlogic,meson-gxbb-i2c";
+		reg = <0x0 0x500 0x0 0x20>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_AO_I2C>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&periphs {
+	rng {
+		compatible = "amlogic,meson-rng";
+		reg = <0x0 0x0 0x0 0x4>;
+	};
+
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
 
-			i2c_A: i2c@8500 {
-				compatible = "amlogic,meson-gxbb-i2c";
-				reg = <0x0 0x08500 0x0 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
+		emmc_pins: emmc {
+			mux {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd",
+				       "emmc_clk";
+				function = "emmc";
 			};
+		};
 
-			i2c_B: i2c@87c0 {
-				compatible = "amlogic,meson-gxbb-i2c";
-				reg = <0x0 0x087c0 0x0 0x20>;
-				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
 			};
+		};
 
-			i2c_C: i2c@87e0 {
-				compatible = "amlogic,meson-gxbb-i2c";
-				reg = <0x0 0x087e0 0x0 0x20>;
-				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
+		sdcard_pins: sdcard {
+			mux {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd",
+				       "sdcard_clk";
+				function = "sdcard";
 			};
 		};
 
-		gic: interrupt-controller@c4301000 {
-			compatible = "arm,gic-400";
-			reg = <0x0 0xc4301000 0 0x1000>,
-			      <0x0 0xc4302000 0 0x2000>,
-			      <0x0 0xc4304000 0 0x2000>,
-			      <0x0 0xc4306000 0 0x2000>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-		};
-
-		aobus: aobus@c8100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
-
-			pinctrl_aobus: pinctrl@14 {
-				compatible = "amlogic,meson-gxbb-aobus-pinctrl";
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges;
-
-				gpio_ao: bank@14 {
-					reg = <0x0 0x00014 0x0 0x8>,
-					      <0x0 0x0002c 0x0 0x4>,
-					      <0x0 0x00024 0x0 0x8>;
-					reg-names = "mux", "pull", "gpio";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				uart_ao_a_pins: uart_ao_a {
-					mux {
-						groups = "uart_tx_ao_a", "uart_rx_ao_a";
-						function = "uart_ao";
-					};
-				};
-
-				remote_input_ao_pins: remote_input_ao {
-					mux {
-						groups = "remote_input_ao";
-						function = "remote_input_ao";
-					};
-				};
-
-				i2c_ao_pins: i2c_ao {
-					mux {
-						groups = "i2c_sck_ao",
-						       "i2c_sda_ao";
-						function = "i2c_ao";
-					};
-				};
-
-				pwm_ao_a_3_pins: pwm_ao_a_3 {
-					mux {
-						groups = "pwm_ao_a_3";
-						function = "pwm_ao_a_3";
-					};
-				};
-
-				pwm_ao_a_6_pins: pwm_ao_a_6 {
-					mux {
-						groups = "pwm_ao_a_6";
-						function = "pwm_ao_a_6";
-					};
-				};
-
-				pwm_ao_a_12_pins: pwm_ao_a_12 {
-					mux {
-						groups = "pwm_ao_a_12";
-						function = "pwm_ao_a_12";
-					};
-				};
-
-				pwm_ao_b_pins: pwm_ao_b {
-					mux {
-						groups = "pwm_ao_b";
-						function = "pwm_ao_b";
-					};
-				};
+		sdio_pins: sdio {
+			mux {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd",
+				       "sdio_clk";
+				function = "sdio";
 			};
+		};
 
-			clkc_AO: clock-controller@040 {
-				compatible = "amlogic,gxbb-aoclkc";
-				reg = <0x0 0x00040 0x0 0x4>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
 			};
+		};
 
-			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x004c0 0x0 0x14>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
 			};
+		};
 
-			ir: ir@580 {
-				compatible = "amlogic,meson-gxbb-ir";
-				reg = <0x0 0x00580 0x0 0x40>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
 			};
+		};
 
-			pwm_ab_AO: pwm@550 {
-				compatible = "amlogic,meson-gxbb-pwm";
-				reg = <0x0 0x0550 0x0 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
 			};
+		};
 
-			i2c_AO: i2c@500 {
-				compatible = "amlogic,meson-gxbb-i2c";
-				reg = <0x0 0x500 0x0 0x20>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_AO_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				       "i2c_sda_a";
+				function = "i2c_a";
 			};
 		};
 
-		periphs: periphs@c8834000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8834000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				       "i2c_sda_b";
+				function = "i2c_b";
+			};
+		};
 
-			rng {
-				compatible = "amlogic,meson-rng";
-				reg = <0x0 0x0 0x0 0x4>;
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				       "i2c_sda_c";
+				function = "i2c_c";
 			};
+		};
 
-			pinctrl_periphs: pinctrl@4b0 {
-				compatible = "amlogic,meson-gxbb-periphs-pinctrl";
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges;
-
-				gpio: bank@4b0 {
-					reg = <0x0 0x004b0 0x0 0x28>,
-					      <0x0 0x004e8 0x0 0x14>,
-					      <0x0 0x00120 0x0 0x14>,
-					      <0x0 0x00430 0x0 0x40>;
-					reg-names = "mux", "pull", "pull-enable", "gpio";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				emmc_pins: emmc {
-					mux {
-						groups = "emmc_nand_d07",
-						       "emmc_cmd",
-						       "emmc_clk";
-						function = "emmc";
-					};
-				};
-
-				nor_pins: nor {
-					mux {
-						groups = "nor_d",
-						       "nor_q",
-						       "nor_c",
-						       "nor_cs";
-						function = "nor";
-					};
-				};
-
-				sdcard_pins: sdcard {
-					mux {
-						groups = "sdcard_d0",
-						       "sdcard_d1",
-						       "sdcard_d2",
-						       "sdcard_d3",
-						       "sdcard_cmd",
-						       "sdcard_clk";
-						function = "sdcard";
-					};
-				};
-
-				sdio_pins: sdio {
-					mux {
-						groups = "sdio_d0",
-						       "sdio_d1",
-						       "sdio_d2",
-						       "sdio_d3",
-						       "sdio_cmd",
-						       "sdio_clk";
-						function = "sdio";
-					};
-				};
-
-				sdio_irq_pins: sdio_irq {
-					mux {
-						groups = "sdio_irq";
-						function = "sdio";
-					};
-				};
-
-				uart_a_pins: uart_a {
-					mux {
-						groups = "uart_tx_a",
-						       "uart_rx_a";
-						function = "uart_a";
-					};
-				};
-
-				uart_b_pins: uart_b {
-					mux {
-						groups = "uart_tx_b",
-						       "uart_rx_b";
-						function = "uart_b";
-					};
-				};
-
-				uart_c_pins: uart_c {
-					mux {
-						groups = "uart_tx_c",
-						       "uart_rx_c";
-						function = "uart_c";
-					};
-				};
-
-				i2c_a_pins: i2c_a {
-					mux {
-						groups = "i2c_sck_a",
-						       "i2c_sda_a";
-						function = "i2c_a";
-					};
-				};
-
-				i2c_b_pins: i2c_b {
-					mux {
-						groups = "i2c_sck_b",
-						       "i2c_sda_b";
-						function = "i2c_b";
-					};
-				};
-
-				i2c_c_pins: i2c_c {
-					mux {
-						groups = "i2c_sck_c",
-						       "i2c_sda_c";
-						function = "i2c_c";
-					};
-				};
-
-				eth_pins: eth_c {
-					mux {
-						groups = "eth_mdio",
-						       "eth_mdc",
-						       "eth_clk_rx_clk",
-						       "eth_rx_dv",
-						       "eth_rxd0",
-						       "eth_rxd1",
-						       "eth_rxd2",
-						       "eth_rxd3",
-						       "eth_rgmii_tx_clk",
-						       "eth_tx_en",
-						       "eth_txd0",
-						       "eth_txd1",
-						       "eth_txd2",
-						       "eth_txd3";
-						function = "eth";
-					};
-				};
-
-				pwm_a_x_pins: pwm_a_x {
-					mux {
-						groups = "pwm_a_x";
-						function = "pwm_a_x";
-					};
-				};
-
-				pwm_a_y_pins: pwm_a_y {
-					mux {
-						groups = "pwm_a_y";
-						function = "pwm_a_y";
-					};
-				};
-
-				pwm_b_pins: pwm_b {
-					mux {
-						groups = "pwm_b";
-						function = "pwm_b";
-					};
-				};
-
-				pwm_d_pins: pwm_d {
-					mux {
-						groups = "pwm_d";
-						function = "pwm_d";
-					};
-				};
-
-				pwm_e_pins: pwm_e {
-					mux {
-						groups = "pwm_e";
-						function = "pwm_e";
-					};
-				};
-
-				pwm_f_x_pins: pwm_f_x {
-					mux {
-						groups = "pwm_f_x";
-						function = "pwm_f_x";
-					};
-				};
-
-				pwm_f_y_pins: pwm_f_y {
-					mux {
-						groups = "pwm_f_y";
-						function = "pwm_f_y";
-					};
-				};
+		eth_pins: eth_c {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
 			};
 		};
 
-		hiubus: hiubus@c883c000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc883c000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+		pwm_a_x_pins: pwm_a_x {
+			mux {
+				groups = "pwm_a_x";
+				function = "pwm_a_x";
+			};
+		};
 
-			clkc: clock-controller@0 {
-				compatible = "amlogic,gxbb-clkc";
-				#clock-cells = <1>;
-				reg = <0x0 0x0 0x0 0x3db>;
+		pwm_a_y_pins: pwm_a_y {
+			mux {
+				groups = "pwm_a_y";
+				function = "pwm_a_y";
 			};
+		};
 
-			mailbox: mailbox@404 {
-				compatible = "amlogic,meson-gxbb-mhu";
-				reg = <0 0x404 0 0x4c>;
-				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
-					     <0 209 IRQ_TYPE_EDGE_RISING>,
-					     <0 210 IRQ_TYPE_EDGE_RISING>;
-				#mbox-cells = <1>;
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
 			};
 		};
 
-		apb: apb@d0000000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xd0000000 0x0 0x200000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+			};
 		};
 
-		usb0: usb@c9000000 {
-			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
-			reg = <0x0 0xc9000000 0x0 0x40000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
-			clock-names = "otg";
-			phys = <&usb0_phy>;
-			phy-names = "usb2-phy";
-			dr_mode = "host";
-			status = "disabled";
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+			};
 		};
 
-		usb1: usb@c9100000 {
-			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
-			reg = <0x0 0xc9100000 0x0 0x40000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-			clock-names = "otg";
-			phys = <&usb1_phy>;
-			phy-names = "usb2-phy";
-			dr_mode = "host";
-			status = "disabled";
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f_x";
+			};
 		};
 
-		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
-			reg = <0x0 0xc9410000 0x0 0x10000
-			       0x0 0xc8834540 0x0 0x4>;
-			interrupts = <0 8 1>;
-			interrupt-names = "macirq";
-			clocks = <&clkc CLKID_ETH>,
-				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
-			phy-mode = "rgmii";
-			status = "disabled";
+		pwm_f_y_pins: pwm_f_y {
+			mux {
+				groups = "pwm_f_y";
+				function = "pwm_f_y";
+			};
 		};
 	};
 };
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+
+	mailbox: mailbox@404 {
+		compatible = "amlogic,meson-gxbb-mhu";
+		reg = <0 0x404 0 0x4c>;
+		interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+			     <0 209 IRQ_TYPE_EDGE_RISING>,
+			     <0 210 IRQ_TYPE_EDGE_RISING>;
+		#mbox-cells = <1>;
+	};
+};
-- 
2.11.0