From: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: <linux-clk@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Arnd Bergmann <arnd@arndb.de>, Mark Brown <broonie@kernel.org>,
Xiaolong Zhang <xiaolong.zhang@spreadtrum.com>,
Orson Zhai <orson.zhai@spreadtrum.com>,
Geng Ren <geng.ren@spreadtrum.com>,
Chunyan Zhang <zhang.lyra@gmail.com>,
Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Subject: [PATCH V1 4/9] clk: sprd: add mux clock support
Date: Sun, 18 Jun 2017 09:58:50 +0800 [thread overview]
Message-ID: <20170618015855.27738-5-chunyan.zhang@spreadtrum.com> (raw)
In-Reply-To: <20170618015855.27738-1-chunyan.zhang@spreadtrum.com>
This is a feature that can also be found in sprd composite clocks,
provide two helpers that can be reused later on.
Original-by: Xiaolong Zhang <xiaolong.zhang@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
drivers/clk/sprd/Makefile | 2 +-
drivers/clk/sprd/ccu_mux.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/sprd/ccu_mux.h | 63 +++++++++++++++++++++++++++++++++++
3 files changed, 146 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/sprd/ccu_mux.c
create mode 100644 drivers/clk/sprd/ccu_mux.h
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 333e2b2..dc89790 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -1,3 +1,3 @@
ifneq ($(CONFIG_OF),)
-obj-y += ccu_common.o ccu_gate.o
+obj-y += ccu_common.o ccu_gate.o ccu_mux.o
endif
diff --git a/drivers/clk/sprd/ccu_mux.c b/drivers/clk/sprd/ccu_mux.c
new file mode 100644
index 0000000..51c744e
--- /dev/null
+++ b/drivers/clk/sprd/ccu_mux.c
@@ -0,0 +1,82 @@
+/*
+ * Spreadtrum multiplexer clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#include "ccu_mux.h"
+
+DEFINE_SPINLOCK(mux_lock);
+
+u8 ccu_mux_helper_get_parent(struct ccu_common *common,
+ struct ccu_mux_internal *mux)
+{
+ u32 reg;
+ u8 parent;
+ int num_parents;
+ int i;
+
+ reg = ccu_readl(common);
+ parent = reg >> mux->shift;
+ parent &= (1 << mux->width) - 1;
+
+ if (mux->table) {
+ num_parents = clk_hw_get_num_parents(&common->hw);
+
+ for (i = 0; i < num_parents; i++)
+ if (parent == mux->table[i] ||
+ (i < (num_parents - 1) && parent > mux->table[i] &&
+ parent < mux->table[i + 1]))
+ return i;
+ if (i == num_parents)
+ return i - 1;
+ }
+
+ return parent;
+}
+
+static u8 ccu_mux_get_parent(struct clk_hw *hw)
+{
+ struct ccu_mux *cm = hw_to_ccu_mux(hw);
+
+ return ccu_mux_helper_get_parent(&cm->common, &cm->mux);
+}
+
+int ccu_mux_helper_set_parent(struct ccu_common *common,
+ struct ccu_mux_internal *mux,
+ u8 index)
+{
+ unsigned long flags = 0;
+ u32 reg;
+
+ if (mux->table)
+ index = mux->table[index];
+
+ spin_lock_irqsave(common->lock, flags);
+
+ reg = ccu_readl(common);
+ reg &= ~GENMASK(mux->width + mux->shift - 1, mux->shift);
+ ccu_writel(reg | (index << mux->shift), common);
+
+ spin_unlock_irqrestore(common->lock, flags);
+
+ return 0;
+}
+
+static int ccu_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct ccu_mux *cm = hw_to_ccu_mux(hw);
+
+ return ccu_mux_helper_set_parent(&cm->common, &cm->mux, index);
+}
+
+const struct clk_ops ccu_mux_ops = {
+ .get_parent = ccu_mux_get_parent,
+ .set_parent = ccu_mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
+};
diff --git a/drivers/clk/sprd/ccu_mux.h b/drivers/clk/sprd/ccu_mux.h
new file mode 100644
index 0000000..f3e3fb4
--- /dev/null
+++ b/drivers/clk/sprd/ccu_mux.h
@@ -0,0 +1,63 @@
+/*
+ * Spreadtrum multiplexer clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _CCU_MUX_H_
+#define _CCU_MUX_H_
+
+#include "ccu_common.h"
+
+struct ccu_mux_internal {
+ u8 shift;
+ u8 width;
+ const u8 *table;
+};
+
+struct ccu_mux {
+ struct ccu_mux_internal mux;
+ struct ccu_common common;
+};
+
+#define _SPRD_CCU_MUX(_shift, _width, _table) \
+ { \
+ .shift = _shift, \
+ .width = _width, \
+ .table = _table, \
+ }
+
+#define SPRD_CCU_MUX(_struct, _name, _parents, _table, \
+ _reg, _shift, _width, \
+ _flags) \
+ struct ccu_mux _struct = { \
+ .mux = _SPRD_CCU_MUX(_shift, _width, _table), \
+ .common = { \
+ .reg = _reg, \
+ .lock = &mux_lock, \
+ .hw.init = CLK_HW_INIT_PARENTS(_name, \
+ _parents, \
+ &ccu_mux_ops,\
+ _flags), \
+ } \
+ }
+
+static inline struct ccu_mux *hw_to_ccu_mux(struct clk_hw *hw)
+{
+ struct ccu_common *common = hw_to_ccu_common(hw);
+
+ return container_of(common, struct ccu_mux, common);
+}
+
+extern const struct clk_ops ccu_mux_ops;
+extern spinlock_t mux_lock;
+
+u8 ccu_mux_helper_get_parent(struct ccu_common *common,
+ struct ccu_mux_internal *mux);
+int ccu_mux_helper_set_parent(struct ccu_common *common,
+ struct ccu_mux_internal *mux,
+ u8 index);
+
+#endif /* _CCU_MUX_H_ */
--
2.7.4
next prev parent reply other threads:[~2017-06-18 2:02 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-18 1:58 [PATCH V1 0/9] add clock driver for Spreadtrum platforms Chunyan Zhang
2017-06-18 1:58 ` [PATCH V1 1/9] dt-bindings: Add Spreadtrum CCU binding documentation Chunyan Zhang
2017-06-23 20:05 ` Rob Herring
2017-06-18 1:58 ` [PATCH V1 2/9] clk: sprd: Add common infrastructure Chunyan Zhang
2017-06-20 1:29 ` Stephen Boyd
2017-06-22 10:12 ` Chunyan Zhang
2017-06-18 1:58 ` [PATCH V1 3/9] clk: sprd: add gate clock support Chunyan Zhang
2017-06-20 1:31 ` Stephen Boyd
2017-06-22 10:16 ` Chunyan Zhang
2017-06-30 1:43 ` Stephen Boyd
2017-06-18 1:58 ` Chunyan Zhang [this message]
2017-06-18 1:58 ` [PATCH V1 5/9] clk: sprd: add divider " Chunyan Zhang
2017-06-18 1:58 ` [PATCH V1 6/9] clk: sprd: add composite " Chunyan Zhang
2017-06-19 0:13 ` kbuild test robot
2017-06-18 1:58 ` [PATCH V1 7/9] clk: sprd: add adjustable pll support Chunyan Zhang
2017-06-20 1:37 ` Stephen Boyd
2017-06-22 10:17 ` Chunyan Zhang
2017-06-22 11:15 ` Arnd Bergmann
2017-06-22 12:06 ` Chunyan Zhang
2017-06-30 1:44 ` Stephen Boyd
2017-06-30 7:55 ` Chunyan Zhang
2017-06-30 19:22 ` Stephen Boyd
2017-07-03 7:41 ` Chunyan Zhang
2017-06-18 1:58 ` [PATCH V1 8/9] clk: sprd: add clocks support for SC9860 Chunyan Zhang
2017-06-20 1:41 ` Stephen Boyd
2017-06-22 10:21 ` Chunyan Zhang
2017-06-30 1:41 ` Stephen Boyd
2017-06-18 1:58 ` [PATCH V1 9/9] arm64: dts: add ccu " Chunyan Zhang
2017-06-20 1:24 ` Stephen Boyd
2017-06-22 10:24 ` Chunyan Zhang
2017-06-30 0:57 ` Stephen Boyd
2017-06-30 7:37 ` Chunyan Zhang
2017-06-20 1:25 ` [PATCH V1 0/9] add clock driver for Spreadtrum platforms Stephen Boyd
2017-06-22 10:07 ` Chunyan Zhang
2017-06-30 0:45 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170618015855.27738-5-chunyan.zhang@spreadtrum.com \
--to=chunyan.zhang@spreadtrum.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geng.ren@spreadtrum.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=orson.zhai@spreadtrum.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=xiaolong.zhang@spreadtrum.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®