From: Niklas Cassel <niklas.cassel@axis.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>
Cc: Niklas Cassel <niklass@axis.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH net] net: stmmac: free an skb first when there are no longer any descriptors using it
Date: Tue, 20 Jun 2017 14:32:41 +0200 [thread overview]
Message-ID: <20170620123241.5677-1-niklas.cassel@axis.com> (raw)
When having the skb pointer in the first descriptor, stmmac_tx_clean
can get called at a moment where the IP has only cleared the own bit
of the first descriptor, thus freeing the skb, even though there can
be several descriptors whose buffers point into the same skb.
By simply moving the skb pointer from the first descriptor to the last
descriptor, a skb will get freed only when the IP has cleared the
own bit of all the descriptors that are using that skb.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 6a1cb59728fe..3c73227ba04c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2830,7 +2830,6 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
tx_q->tx_skbuff_dma[first_entry].buf = des;
tx_q->tx_skbuff_dma[first_entry].len = skb_headlen(skb);
- tx_q->tx_skbuff[first_entry] = skb;
first->des0 = cpu_to_le32(des);
@@ -2864,6 +2863,14 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
tx_q->tx_skbuff_dma[tx_q->cur_tx].last_segment = true;
+ /* Only the last descriptor gets to point to the skb. */
+ tx_q->tx_skbuff[tx_q->cur_tx] = skb;
+
+ /* We've used all descriptors we need for this skb, however,
+ * advance cur_tx so that it references a fresh descriptor.
+ * ndo_start_xmit will fill this descriptor the next time it's
+ * called and stmmac_tx_clean may clean up to this descriptor.
+ */
tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, DMA_TX_SIZE);
if (unlikely(stmmac_tx_avail(priv, queue) <= (MAX_SKB_FRAGS + 1))) {
@@ -2996,8 +3003,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
first = desc;
- tx_q->tx_skbuff[first_entry] = skb;
-
enh_desc = priv->plat->enh_desc;
/* To program the descriptors according to the size of the frame */
if (enh_desc)
@@ -3045,8 +3050,15 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
skb->len);
}
- entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
+ /* Only the last descriptor gets to point to the skb. */
+ tx_q->tx_skbuff[entry] = skb;
+ /* We've used all descriptors we need for this skb, however,
+ * advance cur_tx so that it references a fresh descriptor.
+ * ndo_start_xmit will fill this descriptor the next time it's
+ * called and stmmac_tx_clean may clean up to this descriptor.
+ */
+ entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
tx_q->cur_tx = entry;
if (netif_msg_pktdata(priv)) {
--
2.11.0
next reply other threads:[~2017-06-20 12:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-20 12:32 Niklas Cassel [this message]
2017-06-20 19:41 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170620123241.5677-1-niklas.cassel@axis.com \
--to=niklas.cassel@axis.com \
--cc=alexandre.torgue@st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=niklass@axis.com \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®