From: riel@redhat.com
To: linux-kernel@vger.kernel.org
Cc: jhladky@redhat.com, mingo@kernel.org, mgorman@suse.de,
peterz@infradead.org
Subject: [PATCH 3/4] sched,numa: implement numa node level wake_affine
Date: Fri, 23 Jun 2017 12:55:29 -0400 [thread overview]
Message-ID: <20170623165530.22514-4-riel@redhat.com> (raw)
In-Reply-To: <20170623165530.22514-1-riel@redhat.com>
From: Rik van Riel <riel@redhat.com>
Since select_idle_sibling can place a task anywhere on a socket,
comparing loads between individual CPU cores makes no real sense
for deciding whether to do an affine wakeup across sockets, either.
Instead, compare the load between the sockets in a similar way the
load balancer and the numa balancing code do.
Signed-off-by: Rik van Riel <riel@redhat.com>
---
kernel/sched/fair.c | 130 ++++++++++++++++++++++++++++------------------------
1 file changed, 71 insertions(+), 59 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 949de24e36bd..d03a21e6627d 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2590,6 +2590,60 @@ void task_tick_numa(struct rq *rq, struct task_struct *curr)
}
}
}
+
+/*
+ * Can p be moved from prev_cpu to this_cpu without causing a load
+ * imbalance that would trigger the load balancer?
+ */
+static inline bool numa_wake_affine(struct sched_domain *sd,
+ struct task_struct *p, int this_cpu,
+ int prev_cpu, int sync)
+{
+ struct numa_stats prev_load, this_load;
+ s64 this_eff_load, prev_eff_load;
+
+ update_numa_stats(&prev_load, cpu_to_node(prev_cpu));
+ update_numa_stats(&this_load, cpu_to_node(this_cpu));
+
+ /*
+ * If sync wakeup then subtract the (maximum possible)
+ * effect of the currently running task from the load
+ * of the current CPU:
+ */
+ if (sync) {
+ unsigned long current_load = task_h_load(current);
+
+ if (this_load.load > current_load)
+ this_load.load -= current_load;
+ else
+ this_load.load = 0;
+ }
+
+ /*
+ * In low-load situations, where this_cpu's node is idle due to the
+ * sync cause above having dropped this_load.load to 0, move the task.
+ * Moving to an idle socket will not create a bad imbalance.
+ *
+ * Otherwise check if the nodes are near enough in load to allow this
+ * task to be woken on this_cpu's node.
+ */
+ if (this_load.load > 0) {
+ unsigned long task_load = task_h_load(p);
+
+ this_eff_load = 100;
+ this_eff_load *= prev_load.compute_capacity;
+
+ prev_eff_load = 100 + (sd->imbalance_pct - 100) / 2;
+ prev_eff_load *= this_load.compute_capacity;
+
+ this_eff_load *= this_load.load + task_load;
+ prev_eff_load *= prev_load.load - task_load;
+
+ return this_eff_load <= prev_eff_load;
+ }
+
+ return true;
+}
#else
static void task_tick_numa(struct rq *rq, struct task_struct *curr)
{
@@ -2602,6 +2656,13 @@ static inline void account_numa_enqueue(struct rq *rq, struct task_struct *p)
static inline void account_numa_dequeue(struct rq *rq, struct task_struct *p)
{
}
+
+static inline bool numa_wake_affine(struct sched_domain *sd,
+ struct task_struct *p, int this_cpu,
+ int prev_cpu, int sync)
+{
+ return true;
+}
#endif /* CONFIG_NUMA_BALANCING */
static void
@@ -5360,74 +5421,25 @@ static int wake_wide(struct task_struct *p)
static int wake_affine(struct sched_domain *sd, struct task_struct *p,
int prev_cpu, int sync)
{
- s64 this_load, load;
- s64 this_eff_load, prev_eff_load;
- int idx, this_cpu;
- struct task_group *tg;
- unsigned long weight;
- int balanced;
-
- idx = sd->wake_idx;
- this_cpu = smp_processor_id();
- load = source_load(prev_cpu, idx);
- this_load = target_load(this_cpu, idx);
+ int this_cpu = smp_processor_id();
+ bool affine = false;
/*
* Common case: CPUs are in the same socket, and select_idle_sibling
* will do its thing regardless of what we return.
*/
if (cpus_share_cache(prev_cpu, this_cpu))
- return true;
-
- /*
- * If sync wakeup then subtract the (maximum possible)
- * effect of the currently running task from the load
- * of the current CPU:
- */
- if (sync) {
- tg = task_group(current);
- weight = current->se.avg.load_avg;
-
- this_load += effective_load(tg, this_cpu, -weight, -weight);
- load += effective_load(tg, prev_cpu, 0, -weight);
- }
-
- tg = task_group(p);
- weight = p->se.avg.load_avg;
-
- /*
- * In low-load situations, where prev_cpu is idle and this_cpu is idle
- * due to the sync cause above having dropped this_load to 0, we'll
- * always have an imbalance, but there's really nothing you can do
- * about that, so that's good too.
- *
- * Otherwise check if either cpus are near enough in load to allow this
- * task to be woken on this_cpu.
- */
- this_eff_load = 100;
- this_eff_load *= capacity_of(prev_cpu);
-
- prev_eff_load = 100 + (sd->imbalance_pct - 100) / 2;
- prev_eff_load *= capacity_of(this_cpu);
-
- if (this_load > 0) {
- this_eff_load *= this_load +
- effective_load(tg, this_cpu, weight, weight);
-
- prev_eff_load *= load + effective_load(tg, prev_cpu, 0, weight);
- }
-
- balanced = this_eff_load <= prev_eff_load;
+ affine = true;
+ else
+ affine = numa_wake_affine(sd, p, this_cpu, prev_cpu, sync);
schedstat_inc(p->se.statistics.nr_wakeups_affine_attempts);
+ if (affine) {
+ schedstat_inc(sd->ttwu_move_affine);
+ schedstat_inc(p->se.statistics.nr_wakeups_affine);
+ }
- if (!balanced)
- return 0;
-
- schedstat_inc(sd->ttwu_move_affine);
- schedstat_inc(p->se.statistics.nr_wakeups_affine);
-
- return 1;
+ return affine;
}
static inline int task_util(struct task_struct *p);
--
2.9.4
next prev parent reply other threads:[~2017-06-23 16:55 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-23 16:55 [PATCH 0/4] NUMA improvements with task wakeup and load balancing riel
2017-06-23 16:55 ` [PATCH 1/4] sched,numa: override part of migrate_degrades_locality when idle balancing riel
2017-06-24 6:58 ` Ingo Molnar
2017-06-24 23:45 ` Rik van Riel
2017-06-24 7:22 ` [tip:sched/core] sched/numa: Override part of migrate_degrades_locality() " tip-bot for Rik van Riel
2017-06-23 16:55 ` [PATCH 2/4] sched: simplify wake_affine for single socket case riel
2017-06-24 7:22 ` [tip:sched/core] sched/fair: Simplify wake_affine() for the " tip-bot for Rik van Riel
2017-06-23 16:55 ` riel [this message]
2017-06-24 7:23 ` [tip:sched/core] sched/numa: Implement NUMA node level wake_affine() tip-bot for Rik van Riel
2017-06-26 14:43 ` [PATCH 3/4] sched,numa: implement numa node level wake_affine Peter Zijlstra
2017-06-23 16:55 ` [PATCH 4/4] sched,fair: remove effective_load riel
2017-06-24 7:23 ` [tip:sched/core] sched/fair: Remove effective_load() tip-bot for Rik van Riel
2017-06-26 14:44 ` [PATCH 4/4] sched,fair: remove effective_load Peter Zijlstra
2017-06-26 14:46 ` Peter Zijlstra
2017-06-26 14:55 ` Rik van Riel
2017-06-26 15:04 ` Peter Zijlstra
2017-06-26 15:20 ` Rik van Riel
2017-06-26 16:12 ` Peter Zijlstra
2017-06-26 19:34 ` Rik van Riel
2017-06-27 5:39 ` Peter Zijlstra
2017-06-27 14:55 ` Rik van Riel
2017-08-01 12:19 ` [PATCH] sched/fair: Fix wake_affine() for !NUMA_BALANCING Peter Zijlstra
2017-08-01 19:26 ` Josef Bacik
2017-08-01 21:43 ` Peter Zijlstra
2017-08-24 22:29 ` Chris Wilson
2017-08-25 15:46 ` Chris Wilson
2017-06-27 18:27 ` [PATCH 4/4] sched,fair: remove effective_load Rik van Riel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170623165530.22514-4-riel@redhat.com \
--to=riel@redhat.com \
--cc=jhladky@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome