From: Danny Milosavljevic <dannym@scratchpost.org>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
alsa-devel@alsa-project.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Cc: Danny Milosavljevic <dannym@scratchpost.org>
Subject: [PATCH v13 00/14] ASoC: sun4i-codec: Add Line-In, FM-In, Mic 2, Capture Source, Differential Line-In
Date: Sat, 24 Jun 2017 08:24:05 +0200 [thread overview]
Message-ID: <20170624062419.23778-1-dannym@scratchpost.org> (raw)
This patchset adds some mixer controls to sun4i-codec for the Allwinner A10
and the Allwinner A20.
It also adds a mux for the capture source and the PGA for the MIC2 preamp.
Where possible, it uses SOC_DAPM_DOUBLE in order to cut down on the number
of distinct controls in alsamixer.
v13 changes compared to v12 are:
- Added my "Signed-off-by".
- Clarified some commit message text.
v12 changes compared to v11 are:
- Split up patchset in another way.
- Renamed "Mic1 Capture Volume" to "Mic1 Boost Volume".
- Renamed "Mic2 Capture Volume" to "Mic2 Boost Volume".
- Renamed "Line Capture Volume" to "Line Boost Volume".
- Renamed "Differential Line Capture Switch" to "Differential Line Source".
v11 changes compared to v10 are:
- Split up patchset.
- Fixed typo in Differential Line Capture Switch.
- Renamed "Non-Differential" value to "Stereo".
- Removed duplicate PA Volume mixer control.
v10 changes compared to v9 are:
- Use SOC_DAPM_DOUBLE where possible and it makes sense in order to cut
down on the number of controls.
v9 changes compared to v8 are:
- added Line Differential Capture Switch.
- split Capture Source into Left Capture Select, Right Capture Select.
- added Line Capture Volume.
- rename "sun4i_codec_widgets" to "sun4i_codec_controls" for
consistency with the struct field it's used in.
- rename "Line-In" to "Line".
- rename "Power Amplifier Playback Volume" to "Headphone Playback Volume".
v8 changes compared to v7 are:
- fixed the routes for line and mic capturing.
v7 changes compared to v6 are:
- preparation for different A20, A10 controls is now in an extra patch.
- all register definitions are now at the top.
- sun7i-specific things (A20-specific things) are now less
grouped-together.
- rename "Power Amplifier Volume" to "Power Amplifier Playback Volume".
v6 changes compared to v5 are:
- Mic preamplifier special cases for A20 and A10 now are now not
icky: There are two different _widget arrays and the probe() function
now selects the right one to pass to snd_soc_register_codec() unmodified.
- sun7i-specific things (A20-specific things) are now grouped together.
v5 changes compared to v4 are:
- Mic preamplifier controls have more common names now.
- Mic preamplifier scale has a 0 dB entry as well now, as documented in the
A20 user manual.
- Mic preamplifier has special cases for A20 and A10 now.
- Gain controls have "Gain" in the name now.
v4 changes compared to v3 are:
- names of the input are not uppercase anymore.
- bit index constants are now named as in the A20 user manual v1.4.
- added Mic1-In, Mac2-In.
- added Mic1 and Mic2 Pre-Amplifiers.
v3 changes compared to v2 are:
- added DAPM routes.
v2 changes compared to v1 are:
- moved Line-In and FM-In playback switches to their respective
sun4i_codec_*_mixer_controls.
v1 changes:
- added linein, fmin output volumes and switches.
Danny Milosavljevic (14):
sun4i-codec: Add MIC2 Pre-Amplifier, Mic2 input, Mic2 routes.
sun4i-codec: Add Mic Playback Volume.
sun4i-codec: Add support for extra controls to struct
sun4i_codec_quirks and use them.
sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume.
sun4i-codec: Merge sun4i_codec_left_mixer_controls and
sun4i_codec_right_mixer_controls into sun4i_codec_mixer_controls.
sun4i-codec: Add Mic1 Playback Switch, Mic2 Playback Switch.
sun4i-codec: Add FM Playback Volume.
sun4i-codec: Add FM Left, FM Right, FM Playback Switch.
sun4i-codec: Add Line Playback Volume.
sun4i-codec: Add Line Boost Volume.
sun4i-codec: Add Line Right, Line Left, Line Playback Switch.
sun4i-codec: Add Differential Line Source.
sun4i-codec: Add Left Capture Select, Right Capture Select.
sun4i-codec: Add Capture Volume.
sound/soc/sunxi/sun4i-codec.c | 233 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 210 insertions(+), 23 deletions(-)
--
2.1.4
next reply other threads:[~2017-06-24 6:26 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-24 6:24 Danny Milosavljevic [this message]
2017-06-24 6:24 ` [PATCH v13 01/14] ASoC: sun4i-codec: Add MIC2 Pre-Amplifier, Mic2 Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 02/14] ASoC: sun4i-codec: Add Mic Playback Volume Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 03/14] ASoC: sun4i-codec: Add support for extra controls to struct sun4i_codec_quirks and use them Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 04/14] ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 05/14] ASoC: sun4i-codec: Merge sun4i_codec_left_mixer_controls and sun4i_codec_right_mixer_controls into sun4i_codec_mixer_controls Danny Milosavljevic
2017-06-26 1:48 ` Chen-Yu Tsai
2017-06-26 19:21 ` Maxime Ripard
2017-06-28 8:25 ` [linux-sunxi] " Danny Milosavljevic
2017-06-28 8:38 ` Chen-Yu Tsai
2017-06-28 18:12 ` Mark Brown
2017-06-24 6:24 ` [PATCH v13 06/14] ASoC: sun4i-codec: Add Mic1 Playback Switch, Mic2 Playback Switch Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 07/14] ASoC: sun4i-codec: Add FM Playback Volume Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 08/14] ASoC: sun4i-codec: Add FM Left, FM Right, FM Playback Switch Danny Milosavljevic
2017-06-27 6:09 ` kbuild test robot
2017-06-24 6:24 ` [PATCH v13 09/14] ASoC: sun4i-codec: Add Line Playback Volume Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 10/14] ASoC: sun4i-codec: Add Line Boost Volume Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 11/14] ASoC: sun4i-codec: Add Line Right, Line Left, Line Playback Switch Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 12/14] ASoC: sun4i-codec: Add Differential Line Source Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 13/14] ASoC: sun4i-codec: Add Left Capture Select, Right Capture Select Danny Milosavljevic
2017-06-24 6:24 ` [PATCH v13 14/14] ASoC: sun4i-codec: Add Capture Volume Danny Milosavljevic
2017-06-28 9:10 ` [PATCH v13 00/14] ASoC: sun4i-codec: Add Line-In, FM-In, Mic 2, Capture Source, Differential Line-In Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170624062419.23778-1-dannym@scratchpost.org \
--to=dannym@scratchpost.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®