From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751958AbdGEGRz (ORCPT ); Wed, 5 Jul 2017 02:17:55 -0400 Received: from esa6.microchip.iphmx.com ([216.71.154.253]:60814 "EHLO esa6.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750841AbdGEGRx (ORCPT ); Wed, 5 Jul 2017 02:17:53 -0400 X-IronPort-AV: E=Sophos;i="5.40,310,1496127600"; d="scan'208";a="1946501" Date: Wed, 5 Jul 2017 08:17:21 +0200 From: Ludovic Desroches To: Claudiu Beznea CC: , , , , , , , , , Subject: Re: [PATCH v2 0/5] Add SoM1 support Message-ID: <20170705061721.achgce3jw7fy3aly@rfolt0960.corp.atmel.com> Mail-Followup-To: Claudiu Beznea , nicolas.ferre@microchip.com, alexandre.belloni@free-electrons.com, robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, sza@esh.hu, devicetree@vger.kernel.org, cristian.birsan@microchip.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org References: <1499086572-6083-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <1499086572-6083-1-git-send-email-claudiu.beznea@microchip.com> User-Agent: NeoMutt/20170306 (1.8.0) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, Jul 03, 2017 at 03:56:07PM +0300, Claudiu Beznea wrote: > Hi all, > > This series adds support for sama5d2 SoM1 devices. > > The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board. > The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board. > > The sama5d27_som1_ek uses a EEPROM binding, "start-offset", which is > introduced in patch series: "[RFC PATCH 0/3] Add at24 functionality to > read form different EEPROM offsets". > > Thank you, > Claudiu > For the whole set of patches: Acked-by: Ludovic Desroches > Changes in v2: > o in at91-sama5d27_som1.dtsi: > - increase bootloader and kernel size in flash map (with bootloader > flash offset the dtb and kernel flash offsets were changed) > - use right pin for ethernet-phy interrupt > > o in at91-sama5d27_som1_ek.dts: > - removed memory tag and rely on bootloader to fill the right value > - use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever > posible instead of pin numbers > - remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing > since they are not of intereset for this board > - use "pb4" label for user button instead of "bp1" > > Claudiu Beznea (2): > ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support > ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support > > Cristian Birsan (1): > drivers: soc: atmel: Add basic support for new sama5d2 SiPs > > Cyrille Pitchen (1): > ARM: dts: at91: sama5d2: add QSPI nodes > > Songjun Wu (1): > ARM: dts: at91: sama5d2: add isc node > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 +++++++++ > arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++ > arch/arm/boot/dts/sama5d2.dtsi | 38 ++ > drivers/soc/atmel/soc.c | 8 + > drivers/soc/atmel/soc.h | 4 + > 6 files changed, 780 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi > create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts > > -- > 2.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel