From: Jordan Crouse <jcrouse@codeaurora.org>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Clark <robdclark@gmail.com>,
Stanimir Varbanov <stanimir.varbanov@linaro.org>,
David Airlie <airlied@linux.ie>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Sushmita Susheelendra <ssusheel@codeaurora.org>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations
Date: Wed, 26 Jul 2017 10:35:05 -0600 [thread overview]
Message-ID: <20170726163505.GA8482@jcrouse-lnx.qualcomm.com> (raw)
In-Reply-To: <20170726155329.581707-2-arnd@arndb.de>
On Wed, Jul 26, 2017 at 05:52:45PM +0200, Arnd Bergmann wrote:
> In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t
> into dmam_alloc_coherent, which the compiler warns about:
>
> drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt':
> drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
>
> The returned DMA address is later passed on to a function that
> takes a phys_addr_t, so it's clearly wrong to use the DMA
> mapping interface here: the memory may be uncached, or the
> address may be completely wrong if there is an IOMMU connected
> to the device. What the code actually wants to do is to get
> the physical address from the reserved-mem node. It goes through
> the dma-mapping interfaces for obscure reasons, and this
> apparently only works by chance, relying on specific bugs
> in the error handling of the arm64 dma-mapping implementation.
>
> The same problem existed in the "venus" media driver, which was
> now fixed by Stanimir Varbanov after long discussions.
>
> In order to make some progress here, I have now ported his
> approach over to the adreno driver. The patch is currently
> untested, and should get a good review, but it is now much
> simpler than the original, and it should be obvious what
> goes wrong if I made a mistake in the port.
>
> See also: a6e2d36bf6b7 ("media: venus: don't abuse dma_alloc for non-DMA allocations")
> Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> I think we want this to be applied for 4.13, as the upstream
> code that was added in the merge window is seriously broken without it
> ---
> drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 71 ++++++++++++-----------------------
> drivers/gpu/drm/msm/adreno/a5xx_gpu.h | 2 -
> 2 files changed, 23 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> index 1d54c76a7778..ce545b3a9d17 100644
> --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> @@ -15,7 +15,7 @@
> #include <linux/cpumask.h>
> #include <linux/qcom_scm.h>
> #include <linux/dma-mapping.h>
> -#include <linux/of_reserved_mem.h>
> +#include <linux/of_address.h>
> #include <linux/soc/qcom/mdt_loader.h>
> #include "msm_gem.h"
> #include "msm_mmu.h"
> @@ -29,6 +29,8 @@ static void a5xx_dump(struct msm_gpu *gpu);
> static int zap_shader_load_mdt(struct device *dev, const char *fwname)
> {
> const struct firmware *fw;
> + struct device_node *np;
> + struct resource r;
> phys_addr_t mem_phys;
> ssize_t mem_size;
> void *mem_region = NULL;
> @@ -37,6 +39,21 @@ static int zap_shader_load_mdt(struct device *dev, const char *fwname)
> if (!IS_ENABLED(CONFIG_ARCH_QCOM))
> return -EINVAL;
>
> + np = of_get_child_by_name(dev->of_node, "zap-shader");
> + if (!np)
> + return -ENODEV;
> +
> + np = of_parse_phandle(dev->of_node, "memory-region", 0);
I think this should be np = of_parse_phandle(np, "memory-region", 0);
With that change this patch works great.
> @@ -373,44 +393,6 @@ static int a5xx_zap_shader_resume(struct msm_gpu *gpu)
> }
>
> /* Set up a child device to "own" the zap shader */
This now incorrect comment can be zapped (pun intended).
> -static int a5xx_zap_shader_dev_init(struct device *parent, struct device *dev)
> -{
> - struct device_node *node;
> - int ret;
> -
> - if (dev->parent)
> - return 0;
> -
With above changes,
Acked-and-Tested-By: Jordan Crouse <jcrouse@codeaurora.org>
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2017-07-26 16:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-26 15:52 [PATCH 1/2] drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM Arnd Bergmann
2017-07-26 15:52 ` [PATCH 2/2] drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations Arnd Bergmann
2017-07-26 16:35 ` Jordan Crouse [this message]
2017-07-26 20:01 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170726163505.GA8482@jcrouse-lnx.qualcomm.com \
--to=jcrouse@codeaurora.org \
--cc=airlied@linux.ie \
--cc=arnd@arndb.de \
--cc=bjorn.andersson@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=ssusheel@codeaurora.org \
--cc=stanimir.varbanov@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®