From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, wens@csie.org,
linux@armlinux.org.uk, peppe.cavallaro@st.com,
alexandre.torgue@st.com
Cc: icenowy@aosc.io, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH 3/3] net-next: stmmac: dwmac-sun8i: choose internal PHY via compatible
Date: Fri, 28 Jul 2017 11:28:18 +0200 [thread overview]
Message-ID: <20170728092818.23419-4-clabbe.montjoie@gmail.com> (raw)
In-Reply-To: <20170728092818.23419-1-clabbe.montjoie@gmail.com>
The current way to find if the phy is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the internal one.
This patch adds a new way to find if the PHY is internal, via its
compatible.
Since the phy_mode of the internal PHY does need to be know, the
variant internal_phy member is converted to a boolean.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index fffd6d5fc907..04f7ddd802b0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -48,7 +48,7 @@
*/
struct emac_variant {
u32 default_syscon_value;
- int internal_phy;
+ bool internal_phy;
bool support_mii;
bool support_rmii;
bool support_rgmii;
@@ -75,7 +75,7 @@ struct sunxi_priv_data {
static const struct emac_variant emac_variant_h3 = {
.default_syscon_value = 0x58000,
- .internal_phy = PHY_INTERFACE_MODE_MII,
+ .internal_phy = true,
.support_mii = true,
.support_rmii = true,
.support_rgmii = true
@@ -83,20 +83,20 @@ static const struct emac_variant emac_variant_h3 = {
static const struct emac_variant emac_variant_v3s = {
.default_syscon_value = 0x38000,
- .internal_phy = PHY_INTERFACE_MODE_MII,
+ .internal_phy = true,
.support_mii = true
};
static const struct emac_variant emac_variant_a83t = {
.default_syscon_value = 0,
- .internal_phy = 0,
+ .internal_phy = false,
.support_mii = true,
.support_rgmii = true
};
static const struct emac_variant emac_variant_a64 = {
.default_syscon_value = 0,
- .internal_phy = 0,
+ .internal_phy = false,
.support_mii = true,
.support_rmii = true,
.support_rgmii = true
@@ -889,6 +889,10 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
struct sunxi_priv_data *gmac;
struct device *dev = &pdev->dev;
int ret;
+ static const struct of_device_id internal_phys[] = {
+ { .compatible = "allwinner,sun8i-h3-ephy" },
+ { .compatible = "allwinner,sun8i-v3s-ephy" },
+ };
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
@@ -932,7 +936,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
}
plat_dat->interface = of_get_phy_mode(dev->of_node);
- if (plat_dat->interface == gmac->variant->internal_phy) {
+ if (of_match_node(internal_phys, plat_dat->phy_node)) {
dev_info(&pdev->dev, "Will use internal PHY\n");
gmac->use_internal_phy = true;
gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
--
2.13.0
next prev parent reply other threads:[~2017-07-28 9:31 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-28 9:28 [PATCH 0/3] net-next: stmmac: support future possible different internal phy mode Corentin Labbe
2017-07-28 9:28 ` [PATCH 1/3] dt-bindings: net: add compatible for internal sun8i-h3/sun8i-v3s PHYs Corentin Labbe
2017-07-28 9:28 ` [PATCH 2/3] ARM: sunxi: h3/h5: Add sun8i-h3-ephy compatible Corentin Labbe
2017-07-28 9:44 ` Chen-Yu Tsai
2017-07-28 9:46 ` Icenowy Zheng
2017-07-28 9:28 ` Corentin Labbe [this message]
2017-07-28 9:49 ` [PATCH 3/3] net-next: stmmac: dwmac-sun8i: choose internal PHY via compatible Chen-Yu Tsai
2017-07-28 9:54 ` Corentin Labbe
2017-07-28 9:53 ` [PATCH 0/3] net-next: stmmac: support future possible different internal phy mode Chen-Yu Tsai
2017-07-28 13:47 ` Andrew Lunn
2017-07-28 13:55 ` Andrew Lunn
2017-07-28 14:25 ` Corentin Labbe
2017-07-28 14:36 ` Andrew Lunn
2017-07-28 14:44 ` Corentin Labbe
2017-07-28 14:51 ` Andrew Lunn
2017-07-28 17:54 ` Florian Fainelli
2017-07-29 6:48 ` Corentin Labbe
2017-07-31 12:19 ` Chen-Yu Tsai
2017-07-31 12:26 ` Corentin Labbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170728092818.23419-4-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®