mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: kbuild test robot <lkp@intel.com>
To: Elia Geretto <elia.f.geretto@gmail.com>
Cc: kbuild-all@01.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
	Elia Geretto <elia.f.geretto@gmail.com>
Subject: Re: [PATCH] Staging: pi433: fix some warnings detected using sparse
Date: Sat, 29 Jul 2017 21:36:44 +0800	[thread overview]
Message-ID: <201707292152.0QnsvvRk%fengguang.wu@intel.com> (raw)
In-Reply-To: <20170728125626.17672-1-elia.f.geretto@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 4169 bytes --]

Hi Elia,

[auto build test ERROR on staging/staging-testing]
[also build test ERROR on next-20170728]
[cannot apply to v4.13-rc2]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Elia-Geretto/Staging-pi433-fix-some-warnings-detected-using-sparse/20170729-205713
config: blackfin-allyesconfig (attached as .config)
compiler: bfin-uclinux-gcc (GCC) 6.2.0
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=blackfin 

All errors (new ones prefixed by >>):

   drivers/staging//pi433/pi433_if.c: In function 'rf69_set_rx_cfg':
>> drivers/staging//pi433/pi433_if.c:213:2: error: 'else' without a previous 'if'
     else
     ^~~~
   drivers/staging//pi433/pi433_if.c: In function 'rf69_set_tx_cfg':
   drivers/staging//pi433/pi433_if.c:272:2: error: 'else' without a previous 'if'
     else
     ^~~~

vim +213 drivers/staging//pi433/pi433_if.c

   181	
   182	static int
   183	rf69_set_rx_cfg(struct pi433_device *dev, struct pi433_rx_cfg *rx_cfg)
   184	{
   185		int payload_length;
   186	
   187		/* receiver config */
   188		SET_CHECKED(rf69_set_frequency	(dev->spi, rx_cfg->frequency));
   189		SET_CHECKED(rf69_set_bit_rate	(dev->spi, rx_cfg->bit_rate));
   190		SET_CHECKED(rf69_set_modulation	(dev->spi, rx_cfg->modulation));
   191		SET_CHECKED(rf69_set_antenna_impedance	 (dev->spi, rx_cfg->antenna_impedance));
   192		SET_CHECKED(rf69_set_rssi_threshold	 (dev->spi, rx_cfg->rssi_threshold));
   193		SET_CHECKED(rf69_set_ook_threshold_dec	 (dev->spi, rx_cfg->thresholdDecrement));
   194		SET_CHECKED(rf69_set_bandwidth 		 (dev->spi, rx_cfg->bw_mantisse, rx_cfg->bw_exponent));
   195		SET_CHECKED(rf69_set_bandwidth_during_afc(dev->spi, rx_cfg->bw_mantisse, rx_cfg->bw_exponent));
   196		SET_CHECKED(rf69_set_dagc 		 (dev->spi, rx_cfg->dagc));
   197	
   198		dev->rx_bytes_to_drop = rx_cfg->bytes_to_drop;
   199	
   200		/* packet config */
   201		/* enable */
   202		SET_CHECKED(rf69_set_sync_enable(dev->spi, rx_cfg->enable_sync));
   203		if (rx_cfg->enable_sync == optionOn)
   204		{
   205			SET_CHECKED(rf69_set_fifo_fill_condition(dev->spi, afterSyncInterrupt));
   206		}
   207		else
   208		{
   209			SET_CHECKED(rf69_set_fifo_fill_condition(dev->spi, always));
   210		}
   211		if (rx_cfg->enable_length_byte == optionOn)
   212			SET_CHECKED(rf69_set_packet_format(dev->spi, packetLengthVar));
 > 213		else
   214			SET_CHECKED(rf69_set_packet_format(dev->spi, packetLengthFix));
   215		SET_CHECKED(rf69_set_adressFiltering(dev->spi, rx_cfg->enable_address_filtering));
   216		SET_CHECKED(rf69_set_crc_enable	    (dev->spi, rx_cfg->enable_crc));
   217	
   218		/* lengths */
   219		SET_CHECKED(rf69_set_sync_size(dev->spi, rx_cfg->sync_length));
   220		if (rx_cfg->enable_length_byte == optionOn)
   221		{
   222			SET_CHECKED(rf69_set_payload_length(dev->spi, 0xff));
   223		}
   224		else if (rx_cfg->fixed_message_length != 0)
   225		{
   226			payload_length = rx_cfg->fixed_message_length;
   227			if (rx_cfg->enable_length_byte  == optionOn) payload_length++;
   228			if (rx_cfg->enable_address_filtering != filteringOff) payload_length++;
   229			SET_CHECKED(rf69_set_payload_length(dev->spi, payload_length));
   230		}
   231		else
   232		{
   233			SET_CHECKED(rf69_set_payload_length(dev->spi, 0));
   234		}
   235	
   236		/* values */
   237		if (rx_cfg->enable_sync == optionOn)
   238		{
   239			SET_CHECKED(rf69_set_sync_values(dev->spi, rx_cfg->sync_pattern));
   240		}
   241		if (rx_cfg->enable_address_filtering != filteringOff)
   242		{
   243			SET_CHECKED(rf69_set_node_address     (dev->spi, rx_cfg->node_address));
   244			SET_CHECKED(rf69_set_broadcast_address(dev->spi, rx_cfg->broadcast_address));
   245		}
   246	
   247		return 0;
   248	}
   249	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 45670 bytes --]

      parent reply	other threads:[~2017-07-29 13:37 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-28 12:56 Elia Geretto
2017-07-28 14:17 ` Dan Carpenter
2017-07-29  8:30   ` Elia Geretto
2017-07-29 13:36 ` kbuild test robot [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201707292152.0QnsvvRk%fengguang.wu@intel.com \
    --to=lkp@intel.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=elia.f.geretto@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kbuild-all@01.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®