From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751128AbdHBEqH (ORCPT ); Wed, 2 Aug 2017 00:46:07 -0400 Received: from out1-smtp.messagingengine.com ([66.111.4.25]:53381 "EHLO out1-smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750742AbdHBEqG (ORCPT ); Wed, 2 Aug 2017 00:46:06 -0400 X-ME-Sender: X-Sasl-enc: phcWRiWi1QjWRffFSbW+bnoRqE7nU6m4YiC4+p0UiRAI 1501649164 From: Andrew Jeffery To: linux-watchdog@vger.kernel.org Cc: Andrew Jeffery , wim@iguana.be, linux@roeck-us.net, robh+dt@kernel.org, mark.rutland@arm.com, joel@jms.id.au, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-aspeed@lists.ozlabs.org, openbmc@lists.ozlabs.org Subject: [PATCH 0/2] watchdog: aspeed: External reset signal properties Date: Wed, 2 Aug 2017 14:15:27 +0930 Message-Id: <20170802044529.30032-1-andrew@aj.id.au> X-Mailer: git-send-email 2.11.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hello, This two-patch series builds on top of Chris Bostic's changes introducing the aspeed,external-signal devicetree property (currently v5): https://lkml.org/lkml/2017/7/17/777 Additional characteristics such as pulse width, push-pull vs open-drain driving and active high or low polarity can be configured. This short series defines optional properties to do so, and adds support to the driver. Cheers, Andrew Andrew Jeffery (2): dt-bindings: watchdog: aspeed: External reset signal properties watchdog: aspeed: Support configuration of external signal properties .../devicetree/bindings/watchdog/aspeed-wdt.txt | 10 +- drivers/watchdog/aspeed_wdt.c | 105 ++++++++++++++++++++- 2 files changed, 111 insertions(+), 4 deletions(-) -- 2.11.0