mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: srinivas.kandagatla@linaro.org
To: Mark Brown <broonie@kernel.org>,
	Banajit Goswami <bgoswami@codeaurora.org>,
	alsa-devel@alsa-project.org
Cc: damien.riegel@savoirfairelinux.com,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Patrick Lai <plai@codeaurora.org>,
	linux-kernel@vger.kernel.org,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 0/6] ASoC: codecs: msm8916-wcd-analog: Add support to MBHC
Date: Wed,  2 Aug 2017 19:09:24 +0200	[thread overview]
Message-ID: <20170802170930.26083-1-srinivas.kandagatla@linaro.org> (raw)

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

This patchset adds support to MBHC(Multibutton headset control) block in PM8916
analog block. MBHC support comes from2 blocks first mechanical headset detection
and second headset type, 5 button detection.

This patchset adds support to:
1> Support to NC and NO type of headset Jacks.
2> Mechanical insertion and detection of headset jack.
3> Detect a 3 pole Headphone and a 4 pole Headset.
4> Detect 5 buttons.

Damien sent a similar patchset to add support to mechanical detection,
but that patch has issues and will not work on most usecases (for example
after a playback/capture session, multicodec case). So I only picked up
the BIT mask patch from that series.

Tested it on DB410c with Audio Mezz board with 4 pole and 3 pole
and during playback and recording use cases.

Changes since v1(https://www.spinics.net/lists/kernel/msg2565463.html):
	- Micbias left to hardware default value suggested by Mark.
	- Updated commit log to reflect low power state for mbhc
	- cleaned up code spotted by Mark.
	- Moved the button voltage threshold to dt, suggested by Mark
	- Fixed key release issue reported by Damien

Srinivas Kandagatla (6):
  ASoC: jack: fix snd_soc_codec_set_jack return error
  ASoC: codecs: msm8916-wcd-analog: move codec reset to probe
  ASoC: codecs: msm8916-wcd-analog: get micbias voltage from dt
  ASoC: codecs: msm8916-wcd-analog: add MBHC support
  ASoC: qcom: apq8016-sbc: Add support to Headset JACK
  arm64: dts: apq8016-sbc: add mbhc buttons support

 .../bindings/sound/qcom,msm8916-wcd-analog.txt     |  18 +-
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi          |   2 +
 sound/soc/codecs/msm8916-wcd-analog.c              | 412 +++++++++++++++++++--
 sound/soc/qcom/apq8016_sbc.c                       |  34 ++
 sound/soc/soc-jack.c                               |   2 +-
 5 files changed, 444 insertions(+), 24 deletions(-)

-- 
2.9.3

             reply	other threads:[~2017-08-02 17:10 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-02 17:09 srinivas.kandagatla [this message]
2017-08-02 17:09 ` [PATCH v2 1/6] ASoC: jack: fix snd_soc_codec_set_jack return error srinivas.kandagatla
2017-08-02 17:09 ` [PATCH v2 2/6] ASoC: codecs: msm8916-wcd-analog: move codec reset to probe srinivas.kandagatla
2017-08-02 17:09 ` [PATCH v2 3/6] ASoC: codecs: msm8916-wcd-analog: get micbias voltage from dt srinivas.kandagatla
2017-08-02 17:09 ` [PATCH v2 4/6] ASoC: codecs: msm8916-wcd-analog: add MBHC support srinivas.kandagatla
2017-08-02 23:33   ` Damien Riegel
2017-08-03 11:11     ` Srinivas Kandagatla
2017-08-03 12:53       ` Damien Riegel
2017-08-03 13:10         ` Srinivas Kandagatla
2017-08-02 17:09 ` [PATCH v2 5/6] ASoC: qcom: apq8016-sbc: Add support to Headset JACK srinivas.kandagatla
2017-08-21 18:33   ` Applied "ASoC: qcom: apq8016-sbc: Add support to Headset JACK" to the asoc tree Mark Brown
2017-08-02 17:09 ` [PATCH v2 6/6] arm64: dts: apq8016-sbc: add mbhc buttons support srinivas.kandagatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170802170930.26083-1-srinivas.kandagatla@linaro.org \
    --to=srinivas.kandagatla@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bgoswami@codeaurora.org \
    --cc=broonie@kernel.org \
    --cc=damien.riegel@savoirfairelinux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=plai@codeaurora.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®