From: Branislav Radocaj <branislav@radocaj.org>
To: mchehab@kernel.org, gregkh@linuxfoundation.org
Cc: jb@abbadie.fr, hans.verkuil@cisco.com, nikola.jelic83@gmail.com,
ran.algawi@gmail.com, aquannie@gmail.com, branislav@radocaj.org,
shilpapri@gmail.com, linux-media@vger.kernel.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] Staging: bcm2048: fix bare use of 'unsigned' in radio-bcm2048.c
Date: Fri, 4 Aug 2017 16:58:24 +0200 [thread overview]
Message-ID: <20170804145824.11768-1-branislav@radocaj.org> (raw)
This is a patch to the radio-bcm2048.c file that fixes up
a warning found by the checkpatch.pl tool.
Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
---
drivers/staging/media/bcm2048/radio-bcm2048.c | 50 +++++++++++++--------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/media/bcm2048/radio-bcm2048.c b/drivers/staging/media/bcm2048/radio-bcm2048.c
index 38f72d069e27..90b8f05201ba 100644
--- a/drivers/staging/media/bcm2048/radio-bcm2048.c
+++ b/drivers/staging/media/bcm2048/radio-bcm2048.c
@@ -2000,9 +2000,9 @@ static ssize_t bcm2048_##prop##_read(struct device *dev, \
return sprintf(buf, mask "\n", value); \
}
-#define DEFINE_SYSFS_PROPERTY(prop, signal, size, mask, check) \
-property_write(prop, signal size, mask, check) \
-property_read(prop, size, mask)
+#define DEFINE_SYSFS_PROPERTY(prop, signal_size, size, mask, check) \
+property_write(prop, signal_size, mask, check) \
+property_read(prop, size, mask) \
#define property_str_read(prop, size) \
static ssize_t bcm2048_##prop##_read(struct device *dev, \
@@ -2028,27 +2028,27 @@ static ssize_t bcm2048_##prop##_read(struct device *dev, \
return count; \
}
-DEFINE_SYSFS_PROPERTY(power_state, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(mute, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(audio_route, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(dac_output, unsigned, int, "%u", 0)
-
-DEFINE_SYSFS_PROPERTY(fm_hi_lo_injection, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(fm_frequency, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(fm_af_frequency, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(fm_deemphasis, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(fm_rds_mask, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(fm_best_tune_mode, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(fm_search_rssi_threshold, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(fm_search_mode_direction, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(fm_search_tune_mode, unsigned, int, "%u", value > 3)
-
-DEFINE_SYSFS_PROPERTY(rds, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(rds_b_block_mask, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(rds_b_block_match, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(rds_pi_mask, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(rds_pi_match, unsigned, int, "%u", 0)
-DEFINE_SYSFS_PROPERTY(rds_wline, unsigned, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(power_state, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(mute, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(audio_route, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(dac_output, unsigned int, int, "%u", 0)
+
+DEFINE_SYSFS_PROPERTY(fm_hi_lo_injection, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(fm_frequency, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(fm_af_frequency, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(fm_deemphasis, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(fm_rds_mask, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(fm_best_tune_mode, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(fm_search_rssi_threshold, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(fm_search_mode_direction, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(fm_search_tune_mode, unsigned int, int, "%u", value > 3)
+
+DEFINE_SYSFS_PROPERTY(rds, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(rds_b_block_mask, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(rds_b_block_match, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(rds_pi_mask, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(rds_pi_match, unsigned int, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(rds_wline, unsigned int, int, "%u", 0)
property_read(rds_pi, unsigned int, "%x")
property_str_read(rds_rt, (BCM2048_MAX_RDS_RT + 1))
property_str_read(rds_ps, (BCM2048_MAX_RDS_PS + 1))
@@ -2060,7 +2060,7 @@ property_read(region_bottom_frequency, unsigned int, "%u")
property_read(region_top_frequency, unsigned int, "%u")
property_signed_read(fm_carrier_error, int, "%d")
property_signed_read(fm_rssi, int, "%d")
-DEFINE_SYSFS_PROPERTY(region, unsigned, int, "%u", 0)
+DEFINE_SYSFS_PROPERTY(region, unsigned int, int, "%u", 0)
static struct device_attribute attrs[] = {
__ATTR(power_state, 0644, bcm2048_power_state_read,
--
2.11.0
next reply other threads:[~2017-08-04 15:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-04 14:58 Branislav Radocaj [this message]
2017-08-21 10:57 ` Hans Verkuil
-- strict thread matches above, loose matches on Subject: below --
2017-08-28 15:02 [PATCH] Staging: bcm2048 " Branislav Radocaj
2017-08-03 15:13 [PATCH] Staging: bcm2048: " Branislav Radocaj
2017-08-03 15:46 ` Dan Carpenter
2017-08-04 3:05 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170804145824.11768-1-branislav@radocaj.org \
--to=branislav@radocaj.org \
--cc=aquannie@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=hans.verkuil@cisco.com \
--cc=jb@abbadie.fr \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nikola.jelic83@gmail.com \
--cc=ran.algawi@gmail.com \
--cc=shilpapri@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®