Re: [PATCH 2/5] edac: synopsys: Add EDAC ECC support for ZynqMP DDRC

[Borislav Petkov <bp@alien8.de>]

On Fri, Aug 04, 2017 at 02:00:24PM +0200, Michal Simek wrote:
> From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
> 
> This patch adds EDAC ECC support for ZynqMP DDRC IP
> 
> Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
> 
>  drivers/edac/Kconfig         |   2 +-
>  drivers/edac/synopsys_edac.c | 306 ++++++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 302 insertions(+), 6 deletions(-)

...

> @@ -440,9 +706,12 @@ static int synps_edac_mc_init(struct mem_ctl_info *mci,
>  	mci->dev_name = SYNPS_EDAC_MOD_STRING;
>  	mci->mod_name = SYNPS_EDAC_MOD_VER;
>  	mci->mod_ver = "1";
> -
> -	edac_op_state = EDAC_OPSTATE_POLL;
> -	mci->edac_check = synps_edac_check;
> +	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
> +		edac_op_state = EDAC_OPSTATE_INT;
> +	} else {
> +		edac_op_state = EDAC_OPSTATE_POLL;
> +		mci->edac_check = synps_edac_check;
> +	}
>  	mci->ctl_page_to_phys = NULL;
>  
>  	status = synps_edac_init_csrows(mci);

This hunk doesn't apply cleanly:

$ test-apply.sh -q /tmp/02-edac-synopsys-add_edac_ecc_support_for_zynqmp_ddrc.patch 
checking file drivers/edac/Kconfig
checking file drivers/edac/synopsys_edac.c
Hunk #11 FAILED at 706.
Hunk #12 succeeded at 723 (offset -1 lines).
Hunk #13 succeeded at 754 (offset -1 lines).
Hunk #14 succeeded at 803 (offset -1 lines).
1 out of 14 hunks FAILED

Please redo your patches against this branch:

https://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git/log/?h=for-next

Thx.

> @@ -458,8 +727,18 @@ static int synps_edac_mc_init(struct mem_ctl_info *mci,
>  	.quirks				= 0,
>  };
>  
> +static const struct synps_platform_data zynqmp_enh_edac_def = {
> +	.synps_edac_geterror_info	= synps_enh_edac_geterror_info,
> +	.synps_edac_get_mtype		= synps_enh_edac_get_mtype,
> +	.synps_edac_get_dtype		= synps_enh_edac_get_dtype,
> +	.synps_edac_get_eccstate	= synps_enh_edac_get_eccstate,
> +	.quirks				= DDR_ECC_INTR_SUPPORT,
> +};
> +
>  static const struct of_device_id synps_edac_match[] = {
>  	{ .compatible = "xlnx,zynq-ddrc-a05", .data = (void *)&zynq_edac_def },
> +	{ .compatible = "xlnx,zynqmp-ddrc-2.40a",
> +				.data = (void *)&zynqmp_enh_edac_def},

WARNING: DT compatible string "xlnx,zynqmp-ddrc-2.40a" appears un-documented -- check ./Documentation/devicetree/bindings/
#414: FILE: drivers/edac/synopsys_edac.c:740:
+       { .compatible = "xlnx,zynqmp-ddrc-2.40a",

Please integrate checkpatch.pl into your patch creation workflow.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.
--