From: Lee Jones <lee.jones@linaro.org>
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-kernel@vger.kernel.org, Peter Tyser <ptyser@xes-inc.com>,
abdo.roig@gmail.com
Subject: Re: [PATCH] mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
Date: Tue, 8 Aug 2017 08:29:52 +0100 [thread overview]
Message-ID: <20170808072952.nirm26hh7wcwmjdk@dell> (raw)
In-Reply-To: <20170728105042.66615-1-mika.westerberg@linux.intel.com>
On Fri, 28 Jul 2017, Mika Westerberg wrote:
> At least on Lenovo Thinkpad Yoga, the BIOS seems to monitor the SPI-NOR
> write protection bit and if it is flipped to read/write it assumes the
> BIOS configuration was changed on next reboot. It then, for unknown
> reasons, resets the BIOS settings back to default.
>
> We can prevent this by just leaving the write protection bit intact and
> let the SPI-NOR driver know whether the device is writable or not. In
> case of this particular Lenovo the SPI-NOR flash will be exposed as
> read-only.
>
> Fixes: ff00d7a32a1b ("mfd: lpc_ich: Add support for SPI serial flash host controller")
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=195951
> Reported-by: Abdó Roig-Marange <abdo.roig@gmail.com>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> ---
> drivers/mfd/lpc_ich.c | 10 ----------
> 1 file changed, 10 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
> index 773f1554d2f9..450ae36645aa 100644
> --- a/drivers/mfd/lpc_ich.c
> +++ b/drivers/mfd/lpc_ich.c
> @@ -1119,17 +1119,7 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
> res->start = spi_base + SPIBASE_LPT;
> res->end = res->start + SPIBASE_LPT_SZ - 1;
>
> - /*
> - * Try to make the flash chip writeable now by
> - * setting BCR_WPD. It it fails we tell the driver
> - * that it can only read the chip.
> - */
> pci_read_config_dword(dev, BCR, &bcr);
> - if (!(bcr & BCR_WPD)) {
> - bcr |= BCR_WPD;
> - pci_write_config_dword(dev, BCR, bcr);
> - pci_read_config_dword(dev, BCR, &bcr);
> - }
> info->writeable = !!(bcr & BCR_WPD);
> }
> break;
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
prev parent reply other threads:[~2017-08-08 7:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-28 10:50 Mika Westerberg
2017-08-08 7:29 ` Lee Jones [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170808072952.nirm26hh7wcwmjdk@dell \
--to=lee.jones@linaro.org \
--cc=abdo.roig@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=ptyser@xes-inc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®